The design and experimental measurements of the novel low-pressure thermal energy storage for the heating of electric vehicles
Tóm tắt
Từ khóa
Tài liệu tham khảo
Wehner, U., Ackermann, J.: Neue Ansätze zur Klimatisierung von Elektrofahrzeugen. ATZ 113, 586–591 (2011). https://doi.org/10.1365/s35148-011-0134-9
Ackermann, J., Brinkkötter, C., Priesel, M.: Neue Ansätze zur Energieeffizienten Klimatisierung von Elektrofahrzeugen. ATZ 115, 480–485 (2013). https://doi.org/10.1007/s35148-013-0136-x
Steiner, A., Mimberg, G., Weidmann, F., Caldevilla, A.: Traktionsbatterie als thermischer Speicher. ATZ 120, 66–71 (2018). https://doi.org/10.1007/s35148-017-0158-x
Qinghong, P., Qungui, D.: Progress in heat pump air conditioning systems for electric vehicles—a review. Energies (2016). https://doi.org/10.3390/en9040240
Thomas, A. Weustenfeld.: Heiz- und Kühlkonzept für ein batterieelektrisches Fahrzeug basierend auf Sekundärkreisläufen: Dissertation. Cuvillier (2017)
Homann, G.: Energieefizientes Heizen eines E-Fahrzeugs, Dissertation, Technische Universität Braunschweig (2015)
Hörth, L., Spinnler, M., Sattelmayer, T.: Wärmepumpentechnik in Elektrofahrzeugen, DKV-Tagung, Aachen, Deutschland, 16–18 (2011)
Schedel, F., Försterling, S., Köhler, J.: Thermal management of PHEV and BEV—potentials of heat pump systems, thermal management systems symposium, Denver (CO), USA, 22–24 (2014)
Jung, M., Kemle, A., Strauss, T., et al.: Innenraumheizung von Hybrid- und Elektrofahrzeugen. ATZ Automobiltech Z 113, 396–402 (2011). https://doi.org/10.1365/s35148-011-0093-1
Hofemeier, F.: Ansatz zur Gesamtfahrzeugsimulation für E-Fahrzeuge zur ganzheitlichen Energieeffizienzanalyse, Dissertation, Universität Kassel (2013)
Kaplan, O., Ackermann, J., Fang, F.: Vorstellung eines innovativen und effizienten Klimasystems für elektrisch angetriebene Fahrzeuge. Expert-Verlag, Haus der Technik Fachbuch (2012)
Hünemörder, W.: Simple heat pump system for EV/PHEV, thermal management systems symposium, Denver (CO), USA, 22–24 (2014)
Jouanny, P., Potier, M., Genoist, J.: UltimateCooling™ system for new generation of vehicle, SAE Technical Paper (2005-01-2005) (2005)
Rugh, J. P.: Integrated vehicle thermal management—combining fluid loops in electric drive vehicles, vehicle technologies program annual merit review, Arlington (VA), USA, 13–27 (2013)
Präbst, A., Lorenz, M., Hörth, L., et al.: Thermisches Gesamtkonzept und optimierte Klimaregelung. ATZ Extra 19, 34–39 (2014). https://doi.org/10.1365/s35778-014-1355-9
Kim, N., Rousseau, A., Rask, E.: Thermal model development and validation for hybrid electric vehicles under different thermal conditions, thermal management systems symposium, Denver (CO), USA, 22–24 (2014)
Leighton, D., Rugh, J. P.: EDV range improvement using a combined fluid loop thermal management strategy, thermal management systems symposium, Denver (CO), USA, 22–24 (2014)
Kampker, A., Valle, D., Schnettler, A.: Elektromobilität: Grundlagen einer Zukunftstechnologie. Springer (2013)
Karle, A.: Elektromobilität: Grundlagen und Praxis, vol. 2. Hanser, Auflage (2017)
Müller, J., Schmidt, E., Steber, W.: Elektromobilität: Hochvolt- und 48-Volt-Systeme. Vogel Business Media (2017)
Groẞmann, H.: Pkw-Klimatisierung: Physikalische Grundlagen und technische Umsetzung. 2. Auflage, Springer (2013)
Nasri, M., Hubner, M., Bürger, I., Weckerle, Ch.: Alternative Klimatisierungssysteme mit Metallhydriden für Elektrofahrzeuge, 5. VDI-Fachkonferenz, Thermomanagment für elektromotorisch angetriebene PKW, 15–16. Stuttgart, Deutschland (2016)
Linder, M.: Automotive cooling systems based on metal hydrides: Dissertation. Institute of Nuclear Technology and Energy Systems, University of Stuttgart (2010)
Enke, L.: Analyse des unterstützenden Einsatzes einer Adsorptionskälteanlage für die PKW-Klimatisierung: Dissertation, Technische Universität Braunschweig (2014)
Scherf, H.: Modellbildung und Simulation dynamischer Systeme: Eine Sammlung von Simulink-Beispielen, vol. 4. Oldenbourg Verlag, Auflage (2010)
Daniel Auger.: Driving cycle (simulink block) (https://www.mathworks.com/matlabcentral/fileexchange/46777-driving-cycle-simulink-block), MATLAB central file exchange (2020)
Wagner, W.: Wasser und Wasserdampf im Anlagenbau, Vogel Business Media (2003)
Seidel, M.: Thermodynamik verstehen durch Üben, Band 2: Wärmeübertragung. De Gruyter Oldenbourg (2017)
Wagner, W.: Festigkeitsberechnungen im Apparate- und Rohrleitungsbau, 9. Überarbeitete Auflage, Vogel Business Media (2018)
Barrow, M.G.: Physical chemistry. McGraw-Hill (1979)
Toner, J.D., Catling, D.C.: A low-temperature thermodynamic model for the Na-K-Ca-Mg-Cl system incorporating new experimental heat capacities in KCl, MgC, and CaC solutions. J Chem Eng Data (2017). https://doi.org/10.1021/acs.jced.6b00812
Pitzer, K. S., Peiper, J. C., Busey, R. H.: Thermodynamic properties of aqueous sodium chloride solutions, Lawrence Berkeley Laboratory (1983)
Pitzer, K.S., Wang, P., Simonson, J.: Thermodynamic properties of aqueous magnesium chloride solutions from 250 to 600 K and to 100 MPa. J Phys Chem Ref Data 27, 971 (1998). https://doi.org/10.1063/1.556026
Lindsay, W. T., Liu Chia-Tsun.: Thermodynamic properties of aqueous solutions at high temperature : dissertation, Westinghouse Research Laboratories (1971)
Kraußold, H., et al.: VDI Wärmeatlas. Springer (2013)
Holmes, H.F., Mesmer, R.E.: Aqueous solutions of the alkaline-earth metal chlorides at elevated temperatures. Isopiestic molalities and thermodynamic properties. J Chem Thermodyn 28, 1325–1358 (1996). https://doi.org/10.1006/jcht.1996.0117
Gruskiewicz, M.S., Simonson, J.: Vapor pressures and isopiestic molalities of concentrated CaC (aq), CaBr (aq), and NaCl (aq) to T=523 K. J Chem Thermodyn 37, 906–930 (2005). https://doi.org/10.1016/j.jct.2004.12.009
Holmes, H.F., Busey, R.H., Simonson, J.M., Mesmer, R.E.: CaC (aq) at elevated temperatures. Enthalpies of dilution, isopiestic molalities, and thermodynamic properties. J Chem Thermodyn 26, 271–298 (1994). https://doi.org/10.1016/0021-9614(94)90005-1
Conde-Petit M. R.: Aqueous solutions of lithium and calcium chlorides: property formulations for use in air conditioning equipment design. M. Conde Engineering (2014)
Garvin, D., Parker, V.B., White, H.J.: CODATA thermodynamic tables. Springer (1988)
Sterner, M., Stadler, I.: Energiespeicher: Bedarf, Technologien, Integration. 2. Auflage, Springer (2017)
Masaryk, M., Gschwandtner, L., Manganos, G.: Ruthsove parné akumulátory tepla. TZB Haustechnik 03, 36–38 (2021). (in Slovak language)