The behavior of thermosetting compounds in injection molding cavities

Polymer Engineering and Science - Tập 20 Số 13 - Trang 859-867 - 1980
Musa R. Kamal1, M. E. Ryan1
1Department of Chemical Engineering, McGill University, Montreal, Canada H3A 2A7

Tóm tắt

AbstractThe thermo‐mechanical history of thermosetting compounds in injection molding cavities influences the ultimate properties of molded articles and affects both moldability and the productivity of the process. Mathematical modeling is an attractive approach for obtaining information regarding the thermo‐mechanical history of the compound in the cavity. In order to obtain useful mathematical models of the thermoset injection molding process, it is necessary to have information regarding the kinetics and heats of reaction during cure; the rheological, thermal, and PVT properties of the thermosetting compound; and the variation of these properties with operating variables and the degree of cure. The paper outlines a model of the thermoset injection molding process in simple rectangular or semi‐circular cavities. Methods are described for the experimental determination of the various physical and chemical properties of thermosets, which are required for modeling purposes. The results obtained in conjunction with the characterization of an epoxy system are illustrated. Finally, the paper demonstrates the results of mathematical modeling of the injection molding process for a commercial epoxy molding compound in a semi‐circular cavity, and shows that reasonable agreement is obtained between model predictions and experimental data.

Từ khóa


Tài liệu tham khảo

Gilmore G. D., 1950, Mod. Plast., 27, 143

10.1016/0095-8522(51)90032-3

Gilmore G. D., 1951, Mod. Plast., 28, 117

Toor H. L., 1960, Mod. Plant., 38, 117

Pearson J. R. A., 1966, Mechanical Principles of Polymer Melt Processing

Barrie I. T., 1970, Plast. Polym., 38, 47

Barry I. T., 1971, SPE J., 27, 64

10.1002/pen.760100404

Menges G., 1970, Plastverarbeiten, 21, 951

10.1002/pen.760130205

10.1002/pen.760140311

Rothe J., 1972, Kunststoffe, 62, 142

10.1122/1.549379

10.1002/pen.760150108

10.1002/pen.760150803

Bigg D. M., 1975, S.P.E. ANTEC Tech. Pap., 21, 391

Stevenson J. F., 1970, S.P.E. ANTEC Tech. Pap., 22, 282

10.1002/pen.760120408

10.1002/pen.760120409

10.1002/pen.760151208

10.1002/pen.760140312

10.1002/pen.760150910

Domine J. D., 1976, S.P.E. ANTEC Tech. Pap., 22, 274

Broyer E., 1976, S.P.E. ANTEC Tech. Pap., 22, 563

10.1017/S0022112072002551

Broyer E., 1973, Israel J. Technol., 11, 189

10.1002/aic.690220405

10.1038/058034a0

10.1063/1.1698417

Van der Hoff B. M. E., 1968, Appl. Polym. Sci., 7, 21

10.1002/pol.1968.150060523

10.1002/app.1966.070101010

10.1002/app.1966.070100211

10.1002/app.1967.070110705

10.1002/pol.1967.150050711

10.1002/pol.1968.150060512

10.1016/0032-3861(71)90056-5

10.1002/app.1972.070160809

10.1002/pol.1972.160100414

10.1002/app.1975.070190626

10.1002/app.1968.070120903

10.1002/app.1968.070120427

Zherdev Yu. V., 1969, Soviet Plast., 4, 17

10.1002/pen.760100308

Craig D., 1972, S.P.E. ANTEC Tech. Pap., 18, 533

10.1002/pen.760130312

Kamal M. R., 1973, S. P. E. ANTEC Tech. Pap., 19, 187

10.1002/pen.760140109

10.1002/pen.760140405

10.1002/pen.760150603

10.1002/app.1962.070062205

10.1002/app.1963.070070626

10.1002/pen.760110406

10.1002/pen.760130609

10.1002/app.1973.070170709

10.1002/app.1974.070180401

10.1002/app.1969.070131009

10.1002/pol.1970.150081010

10.1002/pol.1970.150081010

10.1002/pol.1970.150080605

10.1002/pen.760120208

10.1002/pen.760130110

10.1016/0032-3861(73)90055-4

10.1002/pen.760130508

10.1002/app.1975.070190819

10.1016/0040-6031(76)80056-1

Abolafia O. R., 1967, S. P. E. ANTEC Tech. Pap., 13, 610

10.1016/0032-3861(68)90024-4

Prime R. B., 1970, Analytical Calorimetry

Lipshitz S. D., 1975, S.P.E. ANTEC Tech. Pap., 21, 239

Kamal M. B., 1972, S.P.E. ANTEC Tech. Pap., 18, 93

10.1002/app.1969.070131115

10.1002/pol.1961.1205015413

10.1295/polymj.2.509

10.1295/polymj.2.623

10.1295/polymj.4.372

10.1002/pen.760160704

Sourour S., S.P.E. ANTEC Tech. Pap., 22

10.1002/app.1963.070070322

10.1002/app.1963.070070601

10.1002/app.1967.070110407

10.1002/app.1967.070111214

Learmouth G. S., 1968, S. P. E. J., 24, 47

Heinle P. J., 1969, SPE J., 25, 56

Danilkin N. N., 1970, Soviet Plast., 1, 27

Frizelle W. G., 1971, SPE J., 27, 44

Beck W. H., 1971, SPE J., 27, 43

M. E.RyanandM. R.Kamal “Proceedings of the VIIth International Congress on Rheology ” p.290 Gothenburg Sweden (August 23–27 1976).

Thông tin
Thông tin xuất bản

Polymer Engineering and Science

Tập 20 Số 13

859-867

Thông tin tác giả