Technology for the Remediation of Water Pollution: A Review on the Fabrication of Metal Organic Frameworks

Processes - Tập 6 Số 8 - Trang 122
Yongning Bian1,2, Nana Xiong1,2, Guocheng Zhu1,2,3
1College of Civil Engineering, Hunan University of Science and Technology, Xiangtan, 411201, China
2Hunan Provincial Key Laboratory of Shale Gas Resource Utilization and Exploration, Xiangtan 411201, China
3School of Resource Environment and Safety Engineering, Hunan University of Science and Technology, Xiangtan 411201, China

Tóm tắt

The ineffective control of the release of pollutants into water has led to serious water pollution. Compared with conditions in the past, the polluting components in aquatic environments have become increasingly complex. Some emerging substances have led to a new threat to the safety of water. Therefore, developing cost-effective technologies for the remediation of water pollution is urgently needed. Adsorption has been considered the most effective operational unit in water treatment processes and thus adsorption materials have gained wide attention. Among them, metal organic frameworks (denoted as MOFs) have been rapidly developed in recent years due to their unique physicochemical performance. They are characterized by larger porosity and larger specific surface area, easier pore structure designing, and comfortable structural modification. In many fields such as adsorption, separation, storage, and transportation, MOFs show a better performance than conventional adsorption materials such as active carbon. Their performance is often dependent on their structural distribution. To optimize the use of MOFs, their fabrication should be given more attention, without being limited to conventional preparation methods. Alternative preparation methods are given in this review, such as diffusion, solvent thermal, microwave, and ion thermal synthesis. Furthermore, developing functionalized MOFs is an available option to improve the removal efficiencies of a specific contaminant through pre-synthetic modification and post-synthesis modification. Post-synthesis modification has become a recent research hotspot. The coupling of MOFs with other techniques would be another option to ameliorate the remediation of water pollution. On one hand, their intrinsic drawbacks may be reduced. On the other hand, their performance may be enhanced due to their interaction behaviors. Overall, such coupling technologies are able to enhance the performance of an individual material. Because the excellent performance of MOF materials has been widely recognized and their developments have received wide attention, especially in environmental fields, in the present work we provide a review of fabrication of MOFs so as to motivate readers to deepen their understanding of the use of MOFs.

Từ khóa


Tài liệu tham khảo

Ma, 2017, Synthesis of cationic polyacrylamide by low-pressure UV initiation for turbidity water flocculation, Chem. Eng. J., 312, 20, 10.1016/j.cej.2016.11.114

Zhu, 2016, Functionalized polyacrylamide by xanthate for Cr(VI) removal from aqueous solution, Chem. Eng. J., 288, 390, 10.1016/j.cej.2015.12.043

Yin, 2016, Graphene oxide (GO) enhanced polyamide (PA) thin-film nanocomposite (TFN) membrane for water purification, Desalination, 379, 93, 10.1016/j.desal.2015.11.001

Zhu, 2017, Application of 3-D Fluorescence: Characterization of Natural Organic Matter in Natural Water and Water Purification Systems, J. Fluoresc., 27, 1, 10.1007/s10895-017-2146-7

Zhu, 2016, Toward a better understanding of coagulation for dissolved organic nitrogen using polymeric zinc-iron-phosphate coagulant, Water Res., 100, 201, 10.1016/j.watres.2016.05.035

Zhu, 2018, Evaluation of cationic polyacrylamide-based hybrid coagulation for the removal of dissolved organic nitrogen, Environ. Sci. Pollut. Res., 25, 14447, 10.1007/s11356-018-1630-1

Kitagawa, 2014, Metal–organic frameworks (MOFs), Chem. Soc. Rev., 43, 5415, 10.1039/C4CS90059F

Kumar, 2018, Metal-organic frameworks (MOFs) as futuristic options for wastewater treatment, J. Ind. Eng. Chem., 62, 130, 10.1016/j.jiec.2017.12.051

Wang, 2013, Effect of Different Aromatic Carboxylic Acid Ligands on the Catalytic Activities of Metal-Organic Frameworks, Adv. Mater. Res., 634, 513

Deng, 2015, The synthesis of ferrocene-based mixed-metal coordination polymer microspheres and their application in hydrogen storage, J. Alloy. Compd., 647, 1111, 10.1016/j.jallcom.2015.06.194

He, 2017, Advances of Metal-Organic Frameworks in Adsorption and Separation Applications, Acta Chim. Sin., 75, 841, 10.6023/A17040168

Huo, 2017, The fabrication of magnetic metal-organic frameworks composites and their application in environment, Sci. Sin. Chim., 47, 830, 10.1360/N032016-00199

Huxford, 2010, Metal–organic frameworks as potential drug carriers, Curr. Opin. Chem. Biol., 14, 262, 10.1016/j.cbpa.2009.12.012

Horcajada, 2010, Porous metal–organic-framework nanoscale carriers as a potential platform for drug delivery and imaging, Nat. Mater., 9, 172, 10.1038/nmat2608

Kreno, 2011, Metal–organic framework materials as chemical sensors, Chem. Rev., 112, 1105, 10.1021/cr200324t

Hu, 2014, Luminescent metal–organic frameworks for chemical sensing and explosive detection, Chem. Soc. Rev., 43, 5815, 10.1039/C4CS00010B

Farrusseng, 2009, Metal–organic frameworks: Opportunities for catalysis, Angew. Chem. Int. Ed., 48, 7502, 10.1002/anie.200806063

Rosi, 2003, Hydrogen storage in microporous metal-organic frameworks, Science, 300, 1127, 10.1126/science.1083440

Suh, 2011, Hydrogen storage in metal–organic frameworks, Chem. Rev., 112, 782, 10.1021/cr200274s

Bhattacharya, 2016, Design of chiral Co(II)-MOFs and their application in environmental remediation and waste water treatment, RSC Adv., 6, 25149, 10.1039/C5RA26154F

Li, 2018, Recent advances in gas storage and separation using metal–organic frameworks, Mater. Today, 21, 108, 10.1016/j.mattod.2017.07.006

Siperstein, 2018, The influence of the pore size in Metal−Organic Frameworks in adsorption and separation of hydrogen sulphide: A molecular simulation study, Microporous Mesoporous Mater., 271, 160, 10.1016/j.micromeso.2018.06.002

Zhao, 2017, Research of mercury removal from sintering flue gas of iron and steel by the open metal site of Mil-101(Cr), J. Hazard. Mater., 351, 301, 10.1016/j.jhazmat.2017.12.016

Sivasankar, 2018, Synthesis of hierarchical mesoporous graphite oxide/Al2O3 from MIL-100(Al) for the electrochemical determination of caffeic acid in red wine samples, J. Taiwan Inst. Chem. Eng., 84, 188, 10.1016/j.jtice.2018.01.006

Liang, 2016, Adsorption performance of MIL-100(Fe) for separation of olefin–paraffin mixtures, J. Taiwan Inst. Chem. Eng., 70, 74

Liu, 2018, New functionalized IRMOF-10 with strong affinity for methanol: A simulation study, Appl. Surf. Sci., 440, 351, 10.1016/j.apsusc.2018.01.028

Isobe, 2017, Solvothermal preparation and gas permeability of an IRMOF-3 membrane, Microporous Mesoporous Mater., 241, 218, 10.1016/j.micromeso.2016.12.031

Sun, 2018, Facile synthesis of Cd-substituted zeolitic-imidazolate framework Cd-ZIF-8 and mixed-metal CdZn-ZIF-8, Microporous Mesoporous Mater., 264, 35, 10.1016/j.micromeso.2017.12.032

Wu, 2017, Nanoporous ZIF-67 embedded polymers of intrinsic microporosity membranes with enhanced gas separation performance, J. Membr. Sci., 548, 309, 10.1016/j.memsci.2017.11.038

Cho, 2013, High yield 1-L scale synthesis of ZIF-8 via a sonochemical route, Microporous Mesoporous Mater., 169, 180, 10.1016/j.micromeso.2012.11.012

Wang, 2016, Zeolitic metal-biomolecule frameworks based on supertetrahedral lithium clusters and hypoxanthine nucleobase, Inorg. Chem. Commun., 71, 82, 10.1016/j.inoche.2016.06.027

Chen, 2017, Controlled release of drug molecules in metal–organic framework material HKUST-1, Inorg. Chem. Commun., 79, 78, 10.1016/j.inoche.2017.03.027

Marri, 2018, Two novel 3D-MOFs (Ca-TATB and Co-HKUST): Synthesis, structure and characterization, Inorg. Chim. Acta, 478, 8, 10.1016/j.ica.2018.03.014

Feng, 2017, Solvent-induced single crystal to single crystal transformation and “turn-on” fluorescence based on a dynamic 3D metal-organic framework, Inorg. Chem. Commun., 86, 249, 10.1016/j.inoche.2017.10.031

Wang, 2017, Constructing three new metal–organic frameworks based on a mixed-donor ligand: Topological analysis and fluorescence properties, Polyhedron, 122, 55, 10.1016/j.poly.2016.10.041

Tranchemontagne, 2008, Room temperature synthesis of metal-organic frameworks: MOF-5, MOF-74, MOF-177, MOF-199, and IRMOF-0, Tetrahedron, 39, 8553, 10.1016/j.tet.2008.06.036

Liu, 2018, 1D Energetic Metal-organic Frameworks: Synthesis and Properties, Mater. Rev., 32, 223

Dai, 2018, Synthesis of Novel Microporous Nanocomposites of ZIF-8 on Multiwalled Carbon Nanotubes for Adsorptive Removing Benzoic Acid from Water, Chem. Eng. J., 331, 64, 10.1016/j.cej.2017.08.090

Ye, 2018, Room-temperature sintered metal-organic framework nanocrystals: A new type of optical ceramics, Sci. China Mater., 61, 424, 10.1007/s40843-017-9184-1

Dhanya, 2013, Crystal structure, thermal decomposition, photoluminescence and magnetic studies of a new two dimensional metal–organic framework constructed from infinite chains of edge-sharing CeO6 (H2O)2 (NO3) polyhedron with bullet shaped channels, Inorg. Chem. Commun., 35, 140, 10.1016/j.inoche.2013.06.003

Qiu, 2015, Synthesis, Structure and Spectroscopy Study of a 1D Copper Coordination Polymer Based on a Carboxybenzyl Viologen Ligand and SCN-Anion, Spectrosc. Spectr. Anal., 35, 1340

Xie, 2017, Porous hydrogen-bonded organometallic frameworks for adsorption separation of acetylene and carbon dioxide, CIESC J., 68, 154

Wu, 2016, Supramolecular Design of Coordination Complexes of Zn(II) and Vapor Adsorption for MeOH, Chem. J. Chin. Univ., 37, 1069

Wang, 2017, Syntheses and Applications of UiO Series of MOFs, Chin. J. Inorg. Chem., 33, 713

Shearer, 2013, In Situ Infrared Spectroscopic and Gravimetric Characterisation of the Solvent Removal and Dehydroxylation of the Metal Organic Frameworks UiO-66 and UiO-67, Top. Catal., 56, 770, 10.1007/s11244-013-0027-0

Guo, 2017, Highly selective detection of Pb2+ by a nanoscale Ni-based metal-organic framework fabricated through one-pot hydrothermal reaction, Sens. Actuators B Chem., 248, 430, 10.1016/j.snb.2017.03.147

Liu, 2017, Introduction of amidoxime groups into metal-organic frameworks to synthesize MIL-53(Al)-AO for enhanced U(VI) sorption, J. Mol. Liq., 242, 531, 10.1016/j.molliq.2017.07.024

Zhu, 2012, Iron and 1,3,5-Benzenetricarboxylic Metal–Organic Coordination Polymers Prepared by Solvothermal Method and Their Application in Efficient As(V) Removal from Aqueous Solutions, J. Phys. Chem. C, 116, 8601, 10.1021/jp212514a

Yang, 2015, Proton Conductivities in Functionalized UiO-66: Tuned Properties, Thermogravimetry Mass, and Molecular Simulation Analyses, Cryst. Growth Des., 15, 5827, 10.1021/acs.cgd.5b01190

Wang, 2018, Magnetic Cu-MOFs embedded within graphene oxide nanocomposites for enhanced preconcentration of benzenoid-containing insecticides, Talanta, 181, 112, 10.1016/j.talanta.2018.01.004

Wang, 2014, Photocatalytic organic pollutants degradation in metal–organic frameworks, Energy Environ. Sci., 7, 2831, 10.1039/C4EE01299B

Liang, 2013, Microwave-assisted solvothermal synthesis of zirconium oxide based metal-organic frameworks, Chem. Commun., 49, 3706, 10.1039/c3cc40368h

Ni, 2006, Rapid production of metal-organic frameworks via microwave-assisted solvothermal synthesis, J. Am. Chem. Soc. JACS, 128, 12394, 10.1021/ja0635231

Li, 2014, Microwave-assisted synthesis of UIO-66 and its adsorption performance towards dyes, Crystengcomm, 16, 7037, 10.1039/C4CE00526K

Vakili, 2018, Microwave-assisted synthesis of zirconium-based metal organic frameworks (MOFs): Optimization and gas adsorption, Microporous Mesoporous Mater., 260, 45, 10.1016/j.micromeso.2017.10.028

Yang, 2016, Microwave synthesis and hydrogen storage performance of UiO-66, Chin. J. Power Sources, 40, 1605

Wang, 2014, Comparison of Microwave Method, Ultrasonic Method and Traditional Methods for Preparing Cu/MIL-101, Contemp. Chem. Ind., 43, 2514

Li, 2017, Dual-emitting fluorescence of Eu/Zr-MOF for ratiometric sensing formaldehyde, Sens. Actuators B Chem., 253, 275, 10.1016/j.snb.2017.06.064

Dybtsev, 2004, Three-dimensional metal-organic framework with (3,4)-connected net, synthesized from an ionic liquid medium, Chem. Commun., 10, 1594, 10.1039/B403001J

Morris, 2008, Concepts in the ionothermal synthesis of zeolites and metal organic frameworks, Stud. Surf. Sci. Catal., 174, 33, 10.1016/S0167-2991(08)80149-8

Kinik, 2017, Ionic Liquid/Metal Organic Framework Composites: From Synthesis to Applications, ChemSusChem, 10, 2842, 10.1002/cssc.201700716

Dr, 2000, Ionic Liquids-New “Solutions” for Transition Metal Catalysis, Angew. Chem. Int. Ed., 39, 3772, 10.1002/1521-3773(20001103)39:21<3772::AID-ANIE3772>3.0.CO;2-5

Turner, 2003, Use of ab Initio Calculations toward the Rational Design of Room Temperature Ionic Liquids, J. Phys. Chem. A, 107, 2277, 10.1021/jp021694w

Jin, 2002, [Cu (I) (bpp)] BF4: The first extended coordination network prepared solvothermally in an ionic liquid solvent, Chem. Commun., 23, 2872, 10.1039/b209937n

Liu, 2018, Synthesis of Hierarchical Porous Metals Using Ionic-Liquid-Based Media as Solvent and Template, Acta Physico-Chim. Sin., 34, 325, 10.3866/PKU.WHXB201709113

Xie, 2012, The multifunctional roles of the ionic liquid [Bmim][BF4] in the creation of cadmium metal–organic frameworks, Crystengcomm, 14, 4894, 10.1039/c2ce25169h

Fuhua, 2017, Research progress of preparation and application of metal-organic framework materials, Mod. Chem. Ind., 37, 33

Singh, 2017, Solvent-free mechanochemical synthesis and magnetic properties of rare-earth based metal-organic frameworks, J. Alloy. Compd., 696, 118, 10.1016/j.jallcom.2016.11.220

Klimakow, 2012, Characterization of mechanochemically synthesized MOFs, Microporous Mesoporous Mater., 154, 113, 10.1016/j.micromeso.2011.11.039

Chen, 2017, Highly efficient mechanochemical synthesis of an indium based metal-organic framework with excellent water stability, Chem. Eng. Sci., 158, 539, 10.1016/j.ces.2016.11.009

Ning, 2014, Preparation of Metal-Organic Frameworks and Application for CO2 Adsorption and Separation, Prog. Chem., 26, 1645

Cheng, 2018, Low Temperature Solid Phase Synthesis of Manganese-based Metal-Organic Frameworks by High-speed Air Flow Method, Fine Chem., 35, 796

He, 2018, Metal-organic frameworks for highly efficient oxygen electrocatalysis, Chin. J. Catal., 39, 207, 10.1016/S1872-2067(18)63017-7

Bauer, 2007, Influence of connectivity and porosity on ligand-based luminescence in zinc metal-organic frameworks, J. Am. Chem. Soc., 129, 7136, 10.1021/ja0700395

Cohen, 2012, Postsynthetic methods for the functionalization of metal-organic frameworks, Chem. Rev., 112, 970, 10.1021/cr200179u

Wen, 2018, Facile modification of NH2-MIL-125(Ti) to enhance water stability for efficient adsorptive removal of crystal violet from aqueous solution, Colloids Surf. A, 541, 58, 10.1016/j.colsurfa.2018.01.011

Deng, 2010, Multiple Functional Groups of Varying Ratios in Metal-Organic Frameworks, Science, 327, 846, 10.1126/science.1181761

Moghaddam, 2018, Synthesis of UiO-66-OH zirconium metal-organic framework and its application for selective extraction and trace determination of thorium in water samples by spectrophotometry, Spectrochim. Acta Part A Mol. Biomol. Spectrosc., 194, 76, 10.1016/j.saa.2018.01.010

Rada, 2015, Bifunctionalized Metal Organic Frameworks, UiO-66-NO2-N (N = -NH2, -(OH)2, -(COOH)2), for Enhanced Adsorption and Selectivity of CO2 and N2, J. Chem. Eng. Data, 60, 2152, 10.1021/acs.jced.5b00229

Fu, 2014, The photoluminescence and gas sorption properties of three Cd(II) MOFs based on 1,3,5 benzenetribenzoate with -NH2 or -OH groups, Dalton Trans., 43, 4668, 10.1039/c3dt52940a

Ban, 2013, Solvothermal synthesis of mixed-ligand metal–organic framework ZIF-78 with controllable size and morphology, Microporous Mesoporous Mater., 173, 29, 10.1016/j.micromeso.2013.01.031

Devic, 2010, Functionalization in flexible porous solids: Effects on the pore opening and the host-guest interactions, J. Am. Chem. Soc., 132, 1127, 10.1021/ja9092715

Siu, 2013, A mixed dicarboxylate strut approach to enhancing catalytic activity of a de novo urea derivative of metal-organic framework UiO-67, Chem. Commun., 49, 10920, 10.1039/c3cc47177b

Bo, 2018, Flexible and porous cellulose aerogels/zeolitic imidazolate framework (ZIF-8) hybrids for adsorption removal of Cr (IV) from water, J. Solid State Chem., 262, 135, 10.1016/j.jssc.2018.02.022

Li, 2017, High-performance adsorption and separation of anionic dyes in water using a chemically stable graphene-like metal-organic framework, Dalton Trans., 46, 10197, 10.1039/C7DT02208E

Wu, 2014, Synthesis of iron(III)-based metal-organic framework/graphene oxide composites with increased photocatalytic performance for dye degradation, RSC Adv., 4, 40435, 10.1039/C4RA07566H

Lin, 2016, Adsorption of fluoride to UiO-66-NH2 in water: Stability, kinetic, isotherm and thermodynamic studies, J. Colloid Interface Sci., 461, 79, 10.1016/j.jcis.2015.08.061

Zhao, 2015, Enhanced removal of iodide from water induced by a metal-incorporated porous metal–organic framework, Appl. Surf. Sci., 351, 760, 10.1016/j.apsusc.2015.05.186

Zhang, 2014, A porous metal–organic framework with–COOH groups for highly efficient pollutant removal, Chem. Commun., 50, 14455, 10.1039/C4CC06648K

Zhao, 2016, Highly selective and sensitive metal-organic framework fluorescent probe for Cu2+ through rational design of binding sites, Microporous Mesoporous Mater., 224, 149, 10.1016/j.micromeso.2015.11.042

Zhao, 2018, Functionalized metal-organic frameworks for effective removal of rocephin in aqueous solutions, J. Colloid Interface Sci., 514, 234, 10.1016/j.jcis.2017.12.041

Buragohain, 2016, Synthesis, characterization and sorption properties of functionalized Cr-MIL-101-X (X = -F, -Cl, -Br, -CH3, -C6H4, -F2, -(CH3)2) materials, J. Solid State Chem., 238, 195, 10.1016/j.jssc.2016.03.034

Zhang, 2015, Synthesis of phosphotungstic acid-supported versatile metal–organic framework PTA@MIL-101(Fe)–NH2–Cl, RSC Adv., 5, 97589, 10.1039/C5RA17615H

Koh, 2009, A porous coordination copolymer with over 5000 m2/g BET surface area, J. Am. Chem. Soc., 131, 4184, 10.1021/ja809985t

Yin, Z., Wan, S., Yang, J., Kurmoo, M., and Zeng, M. (2017). Recent advances in post-synthetic modification of metal–organic frameworks: New types and tandem reactions. Coord. Chem. Rev.

Ko, 2011, Enhanced Carbon Dioxide Adsorption on Post-Synthetically Modified Metal-Organic Frameworks, Bull. Korean Chem. Soc., 32, 2705, 10.5012/bkcs.2011.32.8.2705

Servalli, 2012, Bokhoven, Fast and high yield post-synthetic modification of metal-organic frameworks by vapor diffusion, Chem. Commun., 48, 1904, 10.1039/c2cc17461h

Clements, 2014, Perturbation of spin crossover behavior by covalent post-synthetic modification of a porous metal-organic framework, Angew. Chem. Int. Ed., 126, 10328, 10.1002/ange.201402951

Zheng, 2018, Lanthanide hybrids of covalently-coordination cooperative post-functionalized metal-organic frameworks for luminescence tuning and highly-selectively sensing of tetrahydrofuran, Dalton Trans., 47, 6210, 10.1039/C8DT00551F

Kusaka, 2018, Generation of thiyl radicals in a zinc(II) porous coordination polymer by light-induced post-synthetic deprotection, Chem. Commun., 54, 4782, 10.1039/C8CC01837E

Song, 2008, Postsynthetic Covalent Modification of Metal-organic Framework (MOF) Materials, Cheminform, 47, 4635

Yoo, 2012, Generation of covalently functionalized hierarchical IRMOF-3 by post-synthetic modification, Chem. Eng. J., 181–182, 740, 10.1016/j.cej.2011.11.048

Nowak, 2015, Towards multifunctional MOFs–transforming a side reaction into a post-synthetic protection deprotection method, Chem. Commun., 51, 10030, 10.1039/C5CC03469H

Alqadami, 2018, Development of citric anhydride anchored mesoporous MOF through post synthesis modification to sequester potentially toxic lead(II) from water, Microporous Mesoporous Mater., 261, 198, 10.1016/j.micromeso.2017.11.016

Sumida, 2013, Impact of metal and anion substitutions on the hydrogen storage properties of M-BTT metal-organic frameworks, J. Am. Chem. Soc., 135, 1083, 10.1021/ja310173e

Wright, 2018, Precise control of pore hydrophilicity enabled by post-synthetic cation exchange in metal-organic frameworks, Theranostics, 8, 2424

Hu, 2018, A Room-Temperature Postsynthetic Ligand Exchange Strategy to Construct Mesoporous Fe-Doped CoP Hollow Triangle Plate Arrays for Efficient Electrocatalytic Water Splitting, Small, 14, e1704233, 10.1002/smll.201704233

Park, 2018, Defect Engineering into Metal-Organic Frameworks for the Rapid and Sequential Installation of Functionalities, Inorg. Chem., 57, 1040, 10.1021/acs.inorgchem.7b02391

Yuan, 2016, Linker Installation: Engineering Pore Environment with Precisely Placed Functionalities in Zirconium MOFs, J. Am. Chem. Soc., 138, 8912, 10.1021/jacs.6b04501

Sun, 2015, Introduction of a mediator for enhancing photocatalytic performance via post-synthetic metal exchange in metal-organic frameworks (MOFs), Chem. Commun., 51, 2056, 10.1039/C4CC09407G

Hong, 2014, Enhancing CO2 Separation Ability of a Metal–Organic Framework by Post-Synthetic Ligand Exchange with Flexible Aliphatic Carboxylates, Chem. Eur. J., 20, 426, 10.1002/chem.201303801

Tu, 2015, Ordered vacancies and their chemistry in metal-organic frameworks, J. Am. Chem. Soc., 136, 14465, 10.1021/ja5063423

Kuppler, 2009, Potential applications of metal-organic frameworks, Coord. Chem. Rev., 253, 3042, 10.1016/j.ccr.2009.05.019

Wen, 2018, Progress and prospect of adsorptive removal of heavy metal ions from aqueous solution using metal-organic frameworks: A review of studies from the last decade, Chemosphere, 201, 627, 10.1016/j.chemosphere.2018.03.047

Yaghi, 2003, Reticular synthesis and the design of new materials, Nature, 423, 705, 10.1038/nature01650

Kobielska, 2018, Metal–organic frameworks for heavy metal removal from water, Coord. Chem. Rev., 358, 92, 10.1016/j.ccr.2017.12.010

Saleem, 2016, Investigations on post-synthetically modified UiO-66-NH2 for the adsorptive removal of heavy metal ions from aqueous solution, Microporous Mesoporous Mater., 221, 238, 10.1016/j.micromeso.2015.09.043

Yavuz, 2017, Zirconium-based highly porous metal-organic framework (MOF-545) as an efficient adsorbent for vortex assisted-solid phase extraction of lead from cereal, beverage and water samples, Food Chem., 237, 707, 10.1016/j.foodchem.2017.06.005

Pan, 2018, A new three-dimensional zinc-based metal-organic framework as a fluorescent sensor for detection of cadmium ion and nitrobenzene, J. Colloid Interface Sci., 513, 418, 10.1016/j.jcis.2017.11.034

Shenashen, 2018, Dual colorimetric and fluorometric monitoring of Bi3+ ions in water using supermicroporous Zr-MOFs chemosensors, J. Lumin., 198, 438, 10.1016/j.jlumin.2018.02.028

Zubair, 2015, Removal of hazardous organics from water using metal-organic frameworks (MOFs): Plausible mechanisms for selective adsorptions, J. Hazard. Mater., 283, 329, 10.1016/j.jhazmat.2014.09.046

Pi, 2018, Adsorptive and photocatalytic removal of Persistent Organic Pollutants (POPs) in water by metal-organic frameworks (MOFs), Chem. Eng. J., 337, 351, 10.1016/j.cej.2017.12.092

Azhar, 2017, One-pot synthesis of binary metal organic frameworks (HKUST-1 and UiO-66) for enhanced adsorptive removal of water contaminants, J. Colloid Interface Sci., 490, 685, 10.1016/j.jcis.2016.11.100

Ramezanalizadeh, 2018, Synthesis of a novel MOF/CuWO4 heterostructure for efficient photocatalytic degradation and removal of water pollutants, J. Clean. Prod., 172, 2655, 10.1016/j.jclepro.2017.11.145

Zhou, 2018, Detection and removal of antibiotic tetracycline in water with a highly stable luminescent MOF, Sens. Actuators B Chem., 262, 137, 10.1016/j.snb.2018.01.218

Chen, 2017, MOF-derived magnetic porous carbon-based sorbent: Synthesis, characterization, and adsorption behavior of organic micropollutants, Adv. Powder Technol., 28, 1769, 10.1016/j.apt.2017.04.018

Yin, 2018, Novel melamine modified metal-organic frameworks for remarkably high removal of heavy metal Pb(II), Desalination, 430, 120, 10.1016/j.desal.2017.12.057

Xiong, 2017, Using MOF-74 for Hg2+ removal from ultra-low concentration aqueous solution, J. Solid State Chem., 246, 16, 10.1016/j.jssc.2016.10.018

Abney, 2014, Metal-organic framework templated inorganic sorbents for rapid and efficient extraction of heavy metals, Adv. Mater., 26, 7993, 10.1002/adma.201403428

Shi, 2018, Magnetic Metal Organic Frameworks (MOFs) Composite for Removal of Lead and Malachite Green in Wastewater, Colloids Surf. A Physicochem. Eng. Asp., 539, 382, 10.1016/j.colsurfa.2017.12.043

Naeimi, 2017, Performance of novel adsorbent prepared by magnetic metal-organic framework (MOF) modified by potassium nickel hexacyanoferrate for removal of Cs+ from aqueous solution, Sep. Purif. Technol., 175, 255, 10.1016/j.seppur.2016.11.028

Yuan, 2017, Schiff base anchored on metal-organic framework for Co (II) removal from aqueous solution, Chem. Eng. J., 326, 691, 10.1016/j.cej.2017.06.024

Bagheri, 2018, Mimetic Ag nanoparticle/Zn-based MOF nanocomposite (AgNPs@ZnMOF) capped with molecularly imprinted polymer for the selective detection of patulin, Talanta, 179, 710, 10.1016/j.talanta.2017.12.009

Falcaro, 2016, Application of metal and metal oxide nanoparticles@MOFs, Coord. Chem. Rev., 307, 237, 10.1016/j.ccr.2015.08.002

Zhang, 2018, Networks constructed by metal organic frameworks (MOFs) and multiwall carbon nanotubes (MCNTs) for excellent electromagnetic waves absorption, Mater. Chem. Phys., 208, 198, 10.1016/j.matchemphys.2018.01.008

Kadhom, 2018, Metal-organic frameworks (MOFs) in water filtration membranes for desalination and other applications, Appl. Mater., 11, 219

Liu, 2015, Highly Water-Stable Zirconium Metal–Organic Framework UiO-66 Membranes Supported on Alumina Hollow Fibers for Desalination, J. Am. Chem. Soc., 137, 6999, 10.1021/jacs.5b02276

Ingole, 2018, Water vapor separation from flue gas using MOF incorporated thin film nanocomposite hollow fiber membranes, Chem. Eng. J., 334, 2450, 10.1016/j.cej.2017.11.123

Yin, 2016, Amino-functionalized MOFs combining ceramic membrane ultrafiltration for Pb(II) removal, Chem. Eng. J., 306, 619, 10.1016/j.cej.2016.07.064

Gholami, 2018, TMU-5 Metal-Organic frameworks (MOFs) as a novel nanofiller for flux increment and fouling mitigation in PES ultrafiltration membrane, Sep. Purif. Technol., 194, 272, 10.1016/j.seppur.2017.11.054

Zhan, H., Bian, Y., Yuan, Q., Ren, B., Hursthouse, A., and Zhu, G. (2018). Preparation and Potential Applications of Super Paramagnetic Nano-Fe3O4. Processes, 6.

Zhao, 2015, Synthesis of magnetic metal-organic framework (MOF) for efficient removal of organic dyes from water, Sci. Rep., 5, 1

Jabbari, 2016, Green synthesis of magnetic MOF@GO and MOF@CNT hybrid nanocomposites with high adsorption capacity towards organic pollutants, Chem. Eng. J., 304, 774, 10.1016/j.cej.2016.06.034

Xu, 2018, One-step synthesis of magnetic and porous Ni@MOF-74 (Ni) composite, Microporous Mesoporous Mater., 259, 178, 10.1016/j.micromeso.2017.10.014

Huo, 2018, Magnetic responsive Fe3O4-ZIF-8 core-shell composites for efficient removal of As(III) from water, Colloids Surf. A: Physicochem. Eng. Asp., 539, 59, 10.1016/j.colsurfa.2017.12.010

Huang, 2018, Magnetic Zr-MOFs nanocomposites for rapid removal of heavy metal ions and dyes from water, Chemosphere, 199, 435, 10.1016/j.chemosphere.2018.02.019

Bandosz, 2011, MOF/graphite oxide hybrid materials: Exploring the new concept of adsorbents and catalysts, Adsorption, 17, 5, 10.1007/s10450-010-9267-5

Liang, 2017, Preparation of graphene oxide@MIL-101 composite and its performance in Cr(VI) removal from aqueous solution, CIESC J., 68, 2105

Wu, 2016, Enhanced adsorptive removal of p-nitrophenol from water by aluminum metal–organic framework/reduced graphene oxide composite, Sci. Rep., 6, 25638, 10.1038/srep25638

Thông tin
Thông tin xuất bản

Processes

Tập 6 Số 8

122

Thông tin tác giả