Tối ưu hóa thông số đúc máng nghiêng và quá trình nung lại cho phôi hợp kim nhôm ADC12 ở trạng thái bán lỏng
Tóm tắt
Từ khóa
#Semi-solid processing; Cooling slope casting; ADC12; Thixocasting; Reheating; Grain spheroidization.Tài liệu tham khảo
[1]. S. Nafisi, R. Ghomashchi (Eds.), “Semi-Solid Processing of Alloys and Composites”, MDPI, (2020).
[2]. D. H. Kirkwood, M. Suéry, P. Kapranos, H. V. Atkinson, and K. P. Young, “Semi-solid Processing of Alloys”, Springer Series in Materials Science, Springer, (2010).
[3]. S. K. Gautam, H. Roy, A. K. Lohar, and S. K. Samanta, “Studies on Mold Filling Behavior of Al–10.5Si–1.7Cu Al Alloy During Rheo Pressure Die Casting System”, International Journal of Metalcasting, (2023).
[4]. Z. Fan, “Semisolid metal processing”, International Materials Reviews, Vol. 47, No. 2, pp. 49–85, (2002).
[5]. H. V. Atkinson, “Modelling the semisolid processing of metallic alloys”, Progress in Materials Science, Vol. 50, No. 3, pp. 341–412, (2005).
[6]. T. Haga and S. Suzuki, “Casting of aluminum alloy ingots for thixoforming using a cooling slope”, Journal of Materials Processing Technology, Vol. 118, No. 1, pp. 169–172, (2001).
[7]. Y. Birol and S. Akdi, “Cooling slope casting to produce EN AW 6082 forging stock for manufacture of suspension components”, Transactions of Nonferrous Metals Society of China, Vol. 24, No. 6, pp. 1674–1682, (2014).
[8]. G. Hirt, L. Khizhnyakova, R. Baadjou, F. Knauf, and R. Kopp, “Semi-Solid Forming of Aluminium and Steel – Introduction and Overview”, Thixoforming, Wiley, pp. 1–27, (2009).
[9]. J. Xu, T. M. Wang, Z. N. Chen, J. Zhu, Z. Q. Cao, and T. J. Li, “Preparation of Semisolid A356 Alloy by a Cooling Slope Processing”, Materials Science Forum, Vol. 675–677, pp. 767–770, (2011).
[10]. D. Sahini, A. Mandal, and M. Chakraborty, “Cooling Slope Casting Process of Semi-solid Aluminum Alloys: A Review”, International Journal of Engineering Research & Technology (IJERT), Vol. 3, pp. 269–283, (2014).
[11]. Y. Birol, “Cooling slope casting and thixoforming of hypereutectic A390 alloy”, Journal of Materials Processing Technology, Vol. 207, No. 1, pp. 200–203, (2008).
[12]. T. M. Wang, J. Xu, Z. N. Chen, J. Zhu, and T. J. Li, “Study on influence of surface coating during cooling slope rheocasting process”, Materials Science and Technology, Vol. 27, No. 10, pp. 1602–1605, (2011).
[13]. D. Rahmalina, H. Sukma, and Andry, “Effect of the Processing Parameters on the Shrinkage Defect Using a High-Pressure Die-Casting Process”, IOP Conference Series: Materials Science and Engineering, Vol. 553, No. 1, Article 012037, (2019).
[14]. M. P. Pandey, R. V. Chavan, “Design & Analysis of HPDC Process for Aluminum Alloy ADC12”, International Research Journal of Engineering and Technology (IRJET), Vol. 7, No. 9, pp. 744–748, (2020).
[15]. H. Xu et al., “Control and optimization of defects in die casting of complicated right crankcase cover”, Journal of Materials Research and Technology, Vol. 33, pp. 2831–2840, (2024).
[16]. M. Okayasu, K. Ota, S. Takeuchi, H. Ohfuji, and T. Shiraishi, “Influence of microstructural characteristics on mechanical properties of ADC12 aluminum alloy”, Materials Science and Engineering A, Vol. 592, pp. 189–200, (2014).
[17]. S. Janudom, T. Rattanochaikul, R. Burapa, S. Wisutmethangoon, and J. Wannasin, “Feasibility of semi-solid die casting of ADC12 aluminum alloy”, Transactions of Nonferrous Metals Society of China, Vol. 20, No. 9, pp. 1756–1762, (2010).
[18]. S. K. Gautam, N. Mandal, H. Roy, A. K. Lohar, S. K. Samanta, and G. Sutradhar, “Optimization of processing parameters of cooling slope process for semi-solid casting of ADC12 Al alloy”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 40, No. 6, Article 291, (2018).
[19]. L. D. Giang, N. A. Tuan, D. V. Luu, N. V. Du, and N. M. Tien, “Optimization of Process Parameters on Microstructure and Mechanical Properties of ADC12 Alloy Aptomat Contact Fabricated by Thixoextrusion”, Proceedings of the 1st International Electronic Conference on Metallurgy and Metals, pp. 29, (2021).
[20]. D. H. Kirkwood, M. Suéry, P. Kapranos, H. V. Atkinson, and K. P. Young, “Raw Material”, Semi-solid Processing of Alloys, Springer, Berlin, Heidelberg, pp. 113–128, (2009).
[21]. Y. Birol, “Solid fraction analysis with DSC in semi-solid metal processing”, Journal of Alloys and Compounds, Vol. 486, No. 1–2, pp. 173–177, (2009).
[22]. B. Semenov, T. B. Ngo, and B. I. Semenov, “Thixoforming of Hypereutectic AlSi12Cu2NiMg Automotive Pistons”, Solid State Phenomena, Vol. 285, pp. 446–452, (2019).