Synthesis and application of polyurethane basic organic-inorganic hybrid materials as highly hydrophobic coatings

Springer Science and Business Media LLC - Tập 23 - Trang 1-7 - 2016
Chen-Han Yang1, Yun-Wen Pan2, Jian-Jhang Guo2, Tai-Horng Young1,3, Wen-Yen Chiu1,2, Kuo-Huang Hsieh1,2
1Institute of Polymer Science and Engineering, National Taiwan University, Taipei, Taiwan
2Department of Chemical Engineering, National Taiwan University, Taipei, Taiwan
3Institute of Biomedical Engineering, National Taiwan University, Taipei, Taiwan

Tóm tắt

In this study, we report a simple method which via modified-colloid silica blending with polybutadiene-base polyurethane to form a hydrophobic composite material. The hydrophobic film is characterized by optical microscopy, scanning electron microscopy (SEM), and water contact angle. Desired surface roughness was obtained by hydrophobic silica tuning the microstructures that contact angle approach 150.1o when contain ODTMS/colloid silica =90/10. With the increase of the blended ratio of modified silica with the PBU, we also could obtain the rough surface, and increased its hydrophobicity.

Tài liệu tham khảo

Barthlott W, Neinhuis C (1997) Planta 202:1–8

Yang S, Wang L, Wang CF, Chen L, Chen S (2010) Langmuir 26:18454–18458

Venkateswara Rao A, Kulkarni MM, Amalnerkar DP, Seth T (2003) J Non-Cryst Solids 330:187–195

Shirtcliffe NJ, McHale G, Newton MI, Perry C (2003) Langmuir 19:5626–5631

Shang HM, Wang Y, Limmer SJ, Chou TP, Takahashi K, Cao GZ (2005) Thin Solid Films 472:37–43

Miwa M, Nakajima A, Fujishima A, Hashimoto K, Watanabe T (2000) Langmuir 16:5754–5760

Nakajima A, Hashimoto K, Watanabe T (2000) Langmuir 16:7044–7047

Tadanaga K, Morinaga J, Minami T (2000) J Sol-Gel Sci Technol 19:211–214

Tadanaga K, Kitamuro K, Matsuda A, Minami T (2003) J Sol-Gel Sci Technol 26:705–708

Nakajima A, Abe K, Hashimoto K, Watanabe T (2000) Thin Solid Films 376:140–143

Satoh K, Nakazumi H, Morita M (2003) J Sol-Gel Sci Technol 27:327–332

Ming W, Wu D, van Benthem R, de With G (2005) Nano Lett 5:2298–2301

Lau KKS, Bico J, Teo KBK, Chhowalla M, Amaratunga GAJ, Milne WI, McKinley GH, Gleason KK (2003) Nano Lett 3:1701–1705

Favia P, Cicala G, Milella A, Palumbo F, Rossini P, d’Agostino R (2003) Surf Coat Technol 169:609–612

Li M, Zhai J, Liu H, Song YL, Jiang L, Zhu D (2003) J Phys Chem B 107:9954–9957

Yun KS, Cho IJ, Bu JU, Kim CJ and Yoon E (2002) IEEE Journal of MEMS 11:454–461

Lee W, Jin MK, Yoo WC, Lee JK (2004) Langmuir 20:7665–7669

Teshima K, Sugimura H, Inoue Y, Takai O, Takano A (2003) Langmuir 19:10624–10627

Onda T, Sbuichi S, Satoh N, Tsujii K (1996) Langmuir 12:2125–2127

Shibuichi S, Onda T, Satoh N, Tsujii K (1996) The Journal of Physical Chemistry 100:19512–19517

Erbil HY, Demirel AL, Avci Y, Mert O (2003) Science 299:1377–1380

Feng L, Song Y, Zhai J, Liu B, Xu J, Jiang L, Zhu D (2003) Angew Chem Int Ed 42:800–802

Fu Q, Rao VR, Basame SB, Keller DJ, Artyushkova K, Fulghum JE, Lpóez GP (2004) Journal of the American chemical. Society 126:8904–8905

Sun T, Wang G, Feng L, Liu B, Ma Y, Jiang L, Zhu D (2004) Angew Chem Int Ed 43:357–360

Zhai L, Cebeci FC, Cohen RE, Rubuner MF (2004) Nano Lett 4:1349–1353

Lin K (2007) R, Kuo C H, Kuo L C, yang K H, Leung M k, Hsieh K H. Eur Polym J 43:4279–4288

Randall D, Lee S (eds) (2002) The polyurethanes book. Wiley, New York

Suresh KI, Kishanprasad VS (2005) Ind Eng Chem Res 44:4504–4512

Green RJ, Corneillie S, Davies J, Davies MC, Roberts CJ, Schacht E (2000) Langmuir 16:2744–2750

Li Y, Kang W, Stoffer JO, Chu B (1994) Macromolecules 27:612–614

Crenshaw BR, Weder C (2006) Macromolecules 39:9581–9589

Zhang C, Xia Y, Chen R, Huh S, Johnston P, Kessler MR (2013) Green Chem 15:1477–1484

Zhang C, Vennerberg D, Kessler MR (2015) J Appl Polym Sci 132: doi:10.1002/APP.42515

Zhang C, Wu. H, Kessler M.R, (2015) Polymer 69: 52–57.

Engels HW, Pirkl HG, Albers R, Albach RW, Krause J, Hoffmann A, Casselmann H, Angew JD (2013) Chem Int Ed 52:9422–9441

Pfister DP, Xia Y, Larock RC (2011) Chem Sus Chem 4:703–717

Špirkova M, Duszova A, Poreba R, Kredatusova J, Bureš R, Faberova M, Šlouf M (2014) Compos Part B 67:434–440

Jimenez GA, Jana SC (2009) Polym Eng Sci 49:2020–2030

Murali Sankar R, Seeni Meera K, Mandal AB, Jaisankar SN (2013) High Performance Polymers 25:135–146

Hepburn C (1992) Polyurethane elastomers. Elsevier Science Publishers, London

Bengtson B, Feger C, MacKnight W (1985) J and Schneider N S. Polymer 26:895–900

Brunette CM, Hsu SL, Rossman M, Mac-Knight WJ, Schneider NS (1981) Polym Eng Sci 21:668–674

Brunette CM, Hsu SL, MacKnight WJ, Schneider NS (1981) Polym Eng Sci 21:163–171

Špírková M, Matĕjka L, Hlavatá D, Meissner B, Pytela J (2000) J Appl Polym Sci 77:381–389

Krishnan PSG, Ayyaswamy K, Nayak SK (2013) J Macromol Sci A 50:128–138

Ducruet N, Delmotte L, Schrodj G, Stankiewicz F, Desgardin N, Vallat MF (2013) J Appl Polym Sci 128:436–443

Bae SB, Kim CK, Kim YC, Chung IJ (2013) J Appl Polym Sci 129:3089–3095

Večeřa M, Prokůpek L, Machotova J, Šňuparek J (2013) J Appl Polym Sci 128:2277–2282

Wright JD and Sommerdijk NAJM, Sol-gel materials: chemistry and applications. (2000) Vol. 4, CRC press, Washington, D.C.

Brinker CJ, Scherer GW (1990) Sol-gel science: the physics and chemistry of sol-gel processing. Gulf Professional Publishing, London

Wenzel RN (1936) Ind Eng Chem 28:988–994

Petrović ZS, Zavargo Z, Fly JH, Macknight WJ (1994) J Appl Polym Sci 51:1087–1095

Malay O, Oguz O, Kosak C, Yilgor E, Yilgor I, Menceloglu YZ (2013) J Polym 54:5310–5320

Khosravi A, Sadeghi M, Banadkohi HZ, Talakesh MM (2014) Ind Eng Chem Res 53:2011–2021

Thông tin
Thông tin xuất bản

Springer Science and Business Media LLC

Tập 23

1-7

Thông tin tác giả