Study of processing parameters in fused deposition modeling based on mechanical properties of acrylonitrile‐butadiene‐styrene filament

Polymer Engineering and Science - Tập 59 Số 1 - Trang 120-128 - 2019
Bai Huang1, Shuna Meng1, Hui He1, Yunchao Jia1, XU Ying-bin2, Huankun Huang2
1School of Materials Science and Engineering, South China University of Technology, Tianhe District, Guangzhou City, Guangdong Province 510640, China
2Guangzhou Keyuan Innovative Materials Co., Ltd, Huadu District, Guangzhou City, Guangdong Province, China

Tóm tắt

Four processing parameters, layer thickness, printing speed, raster angle, and building orientation were investigated in terms of their effects on mechanical properties, surface quality, and microstructure of acrylonitrile‐butadiene‐styrene (ABS) samples in fused deposition modeling (FDM) by orthogonal experiments. The results show that both the building orientation and the printing layer thickness have a great influence on the mechanical properties of ABS specimens. When the layer thickness is 0.1 mm, samples printed in horizontal direction have the best mechanical performance. The vertical‐direction‐built parts generally have the worst tensile strength and impact resistance. Moreover, the layer surface quality of the products becomes worse with the increasing of layer thickness and printing speed. The influence of layer thickness on the roughness of FDM samples is still very significant. These researches are of great significance to explore the FDM molding mechanism and optimize processing parameters to meet the performance demands. POLYM. ENG. SCI., 59:120–128, 2019. © 2018 Society of Plastics Engineers

Từ khóa


Tài liệu tham khảo

10.1595/205651315X688406

10.1108/01445150310501190

10.1371/journal.pone.0049365

10.1021/ac403397r

Ciofu F., 2011, Revista Fiabilitate Si Durabilitate, 2

10.1108/01445150310698652

10.1108/13552540210441166

Vaupotič B., 2006, J. Achiev. Mater. Manuf. Eng., 18

Meng S., 2017, J. Appl. Polym. Sci., 134

10.1016/j.dental.2015.09.018

10.1016/j.jmapro.2015.11.002

10.3144/expresspolymlett.2015.86

10.1557/jmr.2014.158

10.1016/j.compositesb.2015.10.005

10.1016/j.addma.2015.02.001

10.1016/j.compositesa.2016.05.032

10.1016/j.addma.2015.09.006

10.1016/j.compositesa.2016.03.013

Chen J., 2017, Polym. Compos.

10.1007/s40436-014-0097-7

10.1007/s00170-014-5835-2

Dakshinamurthy D., 2016, J. Inst. Eng., 1

10.1016/j.jmatprotec.2005.02.259

10.1108/RPJ-10-2012-0091

10.1108/13552540610682741

10.26472/ijrae.v1i12.44

10.1016/j.apm.2016.06.055

10.1080/10426914.2015.1127955

10.4028/www.scientific.net/MSF.654-656.2556

10.1007/s11837-015-1367-y

10.21817/ijet/2017/v9i2/170902044

Thông tin
Thông tin xuất bản

Polymer Engineering and Science

Tập 59 Số 1

120-128

Thông tin tác giả