Study of Material Compatibility for a Thermal Energy Storage System with Phase Change Material

Energies - Tập 11 Số 3 - Trang 572
Songgang Qiu1, Laura Solomon1, Ming Fang2
1Department of Mechanical and Aerospace Engineering, Benjamin M. Statler College of Engineering and Mineral Resources, West Virginia University, Morgantown, WV 26506, USA
2Bechtel National Incorporation, Hanford Waste Treatment Plant, Richland, WA 99354, USA

Tóm tắt

The suitability of stainless steel 316L and Inconel 625 for use in a latent heat thermal energy storage (TES) system was investigated. A NaCl–NaF eutectic mixture with a melting temperature of 680 °C was used as the phase change material (PCM). Containers were filled with the PCM prior to heating to 750 °C, then examined after 100 and 2500 h of high-temperature exposure by analyzing the material surface and cross-section areas. A small amount of corrosion was present in both samples after 100 h. Neither sample suffered significant damage after 2500 h. The undesirable inter-granular grain boundary attack found in SS316L samples was in the order of 1–2 µm in depth. On Inconel 625 sample surface, an oxide complex formed, resisting material dissolution into the PCM. The surface morphology of tested samples remained largely unchanged after 2500 h, but the corrosion pattern changed from an initially localized corrosion penetration to a more uniform type. After 2500 h, the corrosion depth of Inconel 625 remained at roughly 1–2 µm, indicating that the corrosion rate decelerated. Both materials demonstrated good compatibility with the chosen NaF–NaCl eutectic salt, but the low corrosion activity in Inconel 625 samples shows a performance advantage for long term operation.

Từ khóa


Tài liệu tham khảo

Gil, 2010, State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization, Renew. Sustain. Energy Rev., 14, 31, 10.1016/j.rser.2009.07.035

Kuravi, 2013, Thermal energy storage technologies and systems for concentrating solar power plants, Prog. Energy Combust. Sci., 39, 285, 10.1016/j.pecs.2013.02.001

Stine, W.B., and Diver, R.B. (1994). A Compendium of Solar Dish/Stirling Technology.

Zheng, 2013, Encapsulated phase change materials for energy storage—Characterization by calorimetry, Sol. Energy, 87, 117, 10.1016/j.solener.2012.10.003

Zhao, 2013, High temperature calorimetry and use of magnesium chloride for thermal energy storage, Renew. Energy, 50, 988, 10.1016/j.renene.2012.08.036

Pfeifer, T., Matyas, J., Balaya, P., Wei, J., and Singh, D. (2016). Determination of Parameters for Improved Efficiency in Thermal Energy Storage Using Encapsulated Phase Change Materials. Ceramics for Energy Conversion, Storage, and Distribution Systems, John Wiley & Sons, Inc.

Ushak, S., and Grageda, M. (2015). Using Molten Salts and Other Liquid Sensible Storage Media in Thermal Energy Storage (TES) Systems, Woodhead Publishing Limited.

Gomez, J., Glatzmaier, G.C., Starace, A., Turchi, C., and Ortega, J. (2011, January 20–23). High Temperature Phase Change Materials for Thermal Energy Storage Applications Preprint. Proceedings of the SolarPACES 2011, Granada, Spain.

Singh, 2015, Analysis of a graphite foam-NaCl latent heat storage system for supercritical CO2 power cycles for concentrated solar power, Sol. Energy, 118, 232, 10.1016/j.solener.2015.05.016

Thapa, 2014, Fabrication and analysis of small-scale thermal energy storage with conductivity enhancement, Energy Convers. Manag., 79, 161, 10.1016/j.enconman.2013.12.019

Almajali, 2013, Effect of copper coating on infiltrated PCM/foam, Energy Convers. Manag., 66, 336, 10.1016/j.enconman.2012.12.014

Kim, 2014, Heat transfer analysis of a latent heat thermal energy storage system using graphite foam for concentrated solar power, Sol. Energy, 103, 438, 10.1016/j.solener.2014.02.038

Zhao, 2011, Heat transfer enhancement of high temperature thermal energy storage using metal foams and expanded graphite, Sol. Energy Mater. Sol. Cells, 95, 636, 10.1016/j.solmat.2010.09.032

Baby, 2013, Experimental investigations on thermal performance enhancement and effect of orientation on porous matrix filled PCM based heat sink, Int. Commun. Heat Mass Transf., 46, 27, 10.1016/j.icheatmasstransfer.2013.05.018

Alam, 2015, Macroencapsulation and characterization of phase change materials for latent heat thermal energy storage systems, Appl. Energy, 154, 92, 10.1016/j.apenergy.2015.04.086

Jacob, 2015, Review on shell materials used in the encapsulation of phase change materials for high temperature thermal energy storage, Renew. Sustain. Energy Rev., 48, 79, 10.1016/j.rser.2015.03.038

Xu, 2015, Application of phase change materials for thermal energy storage in concentrated solar thermal power plants: A review to recent developments, Appl. Energy, 160, 286, 10.1016/j.apenergy.2015.09.016

Solomon, L., Elmozughi, A.F., Neti, S., and Oztekin, A. (2014, January 14–20). High temperature thermal energy storage using EPCM-The effect of void. Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE), Montreal, QC, Canada.

Acosta, M.J. (2016). Encapsulated Phase Change Materials for use in High Temperature Thermal Energy Storage Encapsulated Phase Change Materials for use in High Temperature Thermal Energy Storage. Advances in Energy Research, Nova Science Publishers Inc.

Zheng, 2015, Experimental and computational study of thermal energy storage with encapsulated NaNO3 for high temperature applications, Sol. Energy, 115, 180, 10.1016/j.solener.2015.02.002

Elmozughi, 2014, Encapsulated phase change material for high temperature thermal energy storage—Heat transfer analysis, Int. J. Heat Mass Transf., 78, 1135, 10.1016/j.ijheatmasstransfer.2014.07.087

Solomon, 2015, Effect of internal void placement on the heat transfer performance—Encapsulated phase change material for energy storage, Renew. Energy, 78, 438, 10.1016/j.renene.2015.01.035

Liu, 2012, Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems, Renew. Sustain. Energy Rev., 16, 2118, 10.1016/j.rser.2012.01.020

Sharifi, 2011, Enhancement of PCM melting in enclosures with horizontally-finned internal surfaces, Int. J. Heat Mass Transf., 54, 4182, 10.1016/j.ijheatmasstransfer.2011.05.027

Hosseini, 2015, Experimental and numerical evaluation of longitudinally finned latent heat thermal storage systems, Energy Build., 99, 263, 10.1016/j.enbuild.2015.04.045

Shabgard, 2015, Heat pipe heat exchangers and heat sinks: Opportunities, challenges, applications, analysis, and state of the art, Int. J. Heat Mass Transf., 89, 138, 10.1016/j.ijheatmasstransfer.2015.05.020

Naghavi, 2015, A state-of-the-art review on hybrid heat pipe latent heat storage systems, Energy Convers. Manag., 105, 1178, 10.1016/j.enconman.2015.08.044

Sharifi, 2012, Heat pipe-assisted melting of a phase change material, Int. J. Heat Mass Transf., 55, 3458, 10.1016/j.ijheatmasstransfer.2012.03.023

Motahar, 2016, Experimental study on the melting and solidification of a phase change material enhanced by heat pipe, Int. Commun. Heat Mass Transf., 73, 1, 10.1016/j.icheatmasstransfer.2016.02.012

Tiari, 2015, Numerical study of finned heat pipe-assisted thermal energy storage system with high temperature phase change material, Energy Convers. Manag., 89, 833, 10.1016/j.enconman.2014.10.053

Tiari, 2015, Three-dimensional simulation of high temperature latent heat thermal energy storage system assisted by finned heat pipes, Energy Convers. Manag., 105, 260, 10.1016/j.enconman.2015.08.004

Tiari, 2016, Discharging Process of a Finned Heat Pipe–assisted Thermal Energy Storage System with High Temperature Phase Change Material, Energy Convers. Manag., 118, 426, 10.1016/j.enconman.2016.04.025

Mahdavi, 2015, Mathematical modeling and analysis of steady state performance of a heat pipe network, Appl. Therm. Eng., 91, 556, 10.1016/j.applthermaleng.2015.08.017

Mahdavi, 2016, Improvement of a novel heat pipe network designed for latent heat thermal energy storage systems, Appl. Therm. Eng., 108, 878, 10.1016/j.applthermaleng.2016.07.190

Mahdavi, 2015, Numerical investigation of hydrodynamics and thermal performance of a specially configured heat pipe for high-temperature thermal energy storage systems, Appl. Therm. Eng., 81, 325, 10.1016/j.applthermaleng.2015.02.031

Alfantazi, 2012, Molten salt induced corrosion of Inconel 625 superalloy in PbSO4–Pb3O4–PbCl2–Fe2O3–ZnO environment, Corros. Sci., 65, 340, 10.1016/j.corsci.2012.08.035

Sarvghad, 2017, Corrosion of steel alloys in eutectic NaCl + Na2CO3 at 700 °C and Li2CO3 + K2CO3 + Na2CO3 at 450 °C for thermal energy storage, Sol. Energy Mater. Sol. Cells, 170, 48, 10.1016/j.solmat.2017.05.063

Liu, 2014, A comparative study on the high temperature corrosion of TP347H stainless steel, C22 alloy and laser-cladding C22 coating in molten chloride salts, Corros. Sci., 83, 396, 10.1016/j.corsci.2014.03.012

Tirawat, 2016, Corrosion of alloys in a chloride molten salt (NaCl–LiCl) for solar thermal technologies, Sol. Energy Mater. Sol. Cells, 157, 234, 10.1016/j.solmat.2016.05.052

Sarvghad, 2017, Corrosion of Inconel 601 in molten salts for thermal energy storage, Sol. Energy Mater. Sol. Cells, 172, 220, 10.1016/j.solmat.2017.07.036

Lacy, D., Coles-Hamilton, C., and Juhasz, A. (1987, January 10–15). Selection of High Temperature Thermal Energy Storage Materiials for Advanced Solar Dynamic Space Power Systems. Proceedings of the Twenty-Second Intersociety Energy Conversion Engineering Conference (IECEC ’87), Philadelphia, PA, USA.

Mancini, 2003, Dish-Stirling Systems: An Overview of Development and Status, J. Sol. Energy Eng., 125, 135, 10.1115/1.1562634

Qiu, S., Solomon, L., and Rinker, G. (2017). Development of an Integrated Thermal Energy Storage and Free-Piston Stirling Generator for a Concentrating Solar Power System. Energies, 10.

White, M., Qiu, S., and Galbraith, R. (2013, January 14–19). Phase Change Salt Thermal Energy Storage for Dish Stirling Solar Power Systems. Proceedings of the ASME 2013 7th International Conference on Energy Sustainability, Minneapolis, MN, USA.

Lide, D.R. (1998). CRC Handbook of Chemistry and Physics, CRC Press.

Mamantov, G., and Marassi, R. (1987). Molten Salt Chemistry: An Introduction and Selected Applications, Springer.

Grimes, 1970, Molten-Salt Reactor Chemistry, Nucl. Appl. Technol., 8, 137, 10.13182/NT70-A28621

Luo, 1992, Compatibility of Inconel 617R Alloy with LIF-MGF2-Kf Thermal Energy Storage Salts and Vacuum at High Temperature, J. Mater. Eng. Perform., 1, 755, 10.1007/BF02658258

Khanna, A.S. (2002). Introduction to High Temperature Oxidation and Corrosion, ASM International.

Dieter, G.E., Kuhn, H.A., and Semiatin, S.L. (2003). Handbook of Workability and Process Design, ASM International.