Stress Intensity Factors for an Interface Kinked Crack in a Bi-Material Plate Loaded Normal to the Interface

Ekman M.J., Marsavina L., Nurse A.D. (2000). Complex fracture parameters for an interface crack between two hardening materials: a photoelastic study. Fatigue Fract. Engng. Mater. Struct. 23: 619-632

Hutchinson J.W., Mear J.W., Rice J.R. (1987). Crack paralleling an interface between dissimilar materials. ASME Journal of applied Mechanics 54: 828-832

Hutchinson, J. W., Suo, Z. (1991). Mixed mode cracking in layered materials. In: Advances in Applied Mechanics, Edited by Hutchinson, J.W. and Wu, T.Y., Vol. 29, Academic Press, New York, 63-191.

Iesulauro E. (2002). FRANC2D/L a crack propagation simulator for plane layered materials. Cornell University, Ithaca

Irwin G.R. (1957). Analysis of stress and strain near the end of a crack transversing a plate. ASME Journal of Applied Mechanics 24: 361-364

Isida M., Noguchi H. (1983). Plane elastostatic problems of bonded dissimilar materials with an interface crack and arbitrary located cracks. Trans. Japan Soc. Mech. Engrs. 49: 137-146

Kaya C., Butler E.G., Lewis M.H. (2003). Co-extrusion of Al2O3/ZrO2 bi-phase high temperature ceramics with fine scale aligned microstructures. Journal of the European Ceramic Society 23: 935–942

Murakami, Y. (1987). Stress Intensity Factors Handbook. Pergamon Press, Oxford, 480-488.

O’ Dowd N.P., Shih C.F., Stout M.G. (1992) Test geometries for measuring interfacial fracture toughness. Int. J. Solids Structures 29: 571–589

Ramamurthy T.S., Krishnamurthy T., Badari Narayana K., Vijayakumar K., Dattaguru B. (1986). Modified crack closure integral method with quarter point elements. Mechanics Research Communications 13: 179-186

Rice, J.R., Suo, Z., Wang, J.S. (1990). Mechanics and thermodynamics of brittle interface failure in bimaterial systems. In: Metal-Ceramic Interfaces, eds. M. Ruhle, A.G. Evans, M.F. Ashby, J.P. Hirth, Pergamon Press, Oxford, 269-294.

Rybicki E.R., Kanninen M. (1977). A finite element calculation of stress intensity factors by a modified crack closure integral. Engng. Fract. Mechs. 9: 931-938

Shih C.F., Asaro R.J. (1988). Elastic-plastic analysis of cracks on bimaterial interfaces: Part 1-Small Scale Yielding. ASME Journal of Applied Mechanics 55: 299-315

Smelser R.E. (1979). Evaluation of stress intensity factors for bi-materials bodies using numerical crack flank displacement data. Int. J. Fract. 15: 135-315

Wawrzynek P.A., Ingraffea A.R (1991). Discrete modeling of crack propagation: theoretical aspects and implementation issues in two and three dimensions. Cornell University, Ithaca