State-of-the-art development of hybrid/mixed finite element method

Finite Elements in Analysis and Design - Tập 21 - Trang 5-20 - 1995
Theodore H.H. Pian1
1Department of Aeronautics and Astronautics, Massachusetts Institute of Technology, Cambridge, MA 02139, USA

Tài liệu tham khảo

Pian, 1964, Derivation of element stiffness matrices by assumed stress distributions, AIAA J., 2, 1333, 10.2514/3.2546

Tong, 1969, A variational principle and the convergence of a finite-element method based on assumed stress distribution, Int. J. Solids Struct., 5, 463, 10.1016/0020-7683(69)90036-5

Pian, 1978, A historical note about hybrid elements, Int. J. Numer. Methods Eng., 12, 891, 10.1002/nme.1620120514

Pian, 1982, Recent advances in hybrid/mixed finite elements, 82

Pian, 1994, Thirty-Year history of hybrid stress finite element methods, 23

Washizu, 1982

Felippa, 1990, Variational formulation of high performance finite elements: parametrized variational principles, Comput. Struct., 36, 1, 10.1016/0045-7949(90)90169-3

Felippa, 1994, A survey of parametrized variational principles and applications to computational mechanics, Comput. Methods Appl. Mech. Eng., 113, 109, 10.1016/0045-7825(94)90214-3

Pian, 1965, Element stiffness-matrices for boundary compatibility and for prescribed boundary stresses, 457

Pian, 1973, On the suppression of zero energy deformation modes, Int. J. Numer. Methods Eng., 19, 1741, 10.1002/nme.1620191202

Babuska, 1973, The finite element method with Lagrange multipliers, Numer. Math., 20, 179, 10.1007/BF01436561

Brezzi, 1974, On the existence, uniqueness and approximation of saddle point problems arising from Lagrangian multipliers, RAIRO, 8-R2, 129

Pian, 1987, Alternative ways for formulation of hybrid stress elements, Int. J. Numer. Methods Eng., 18, 1679, 10.1002/nme.1620181107

Pian, 1985, Finite elements based on consistently assumed stresses and displacements, Finite Elements Anal. Des., 1, 131, 10.1016/0168-874X(85)90023-X

Zienkiewicz, 1989, Vol. 1

Jiao, 1991, A method simplifying the flexibility matrix H of the hybrid stress element, Comput. Struct. Mech. Appl., 8, 214

Sze, 1992, Efficient hybrid/mixed elements using admissible matrix formulation, Comput. Methods Appl. Mech. Eng., 99, 1, 10.1016/0045-7825(92)90120-9

Sze, 1993, A novel approach for devising higher order hybrid elements, Int. J. Numer. Methods Eng., 36, 3303, 10.1002/nme.1620361907

Lee, 1986, A new efficient approach to the formulation of mixed finite element models, Int. J. Numer. Methods Eng., 23, 1629, 10.1002/nme.1620230905

Tang, 1983, String net function approximation and quasi-conforming technique, 173

Chen, 1992, Three-dimensional 8-node and 20-node refined hybrid isoparametric elements, Int. J. Numer. Methods Eng., 35, 1871, 10.1002/nme.1620350909

Lee, 1978, Improvement of plate and shell finite elements by mixed formulations, AIAA J., 16, 29, 10.2514/3.60853

Key, 1969, A variational principle for incompressible and nearly incompressible anisotropic elasticity, Int. J. Solid Struct., 5, 951, 10.1016/0020-7683(69)90081-X

Pian, 1972, Some recent studies in assumed stress hybrid models, 87

Reissner, 1984, On a mixed variational theorem and a proposed application, Int. J. Numer. Methods Eng., 20, 1366, 10.1002/nme.1620200714

Reissner, 1986, On a mixed variational theorem and on shear deformable plate theory, Int. J. Numer. Methods Eng., 23, 193, 10.1002/nme.1620230203

Moriya, 1986, Laminated plate and shell elements for finite element analysis of advanced fiber reinforced composite structures, Nippon Kikai Gakkai Ronbunshu, 52, 1600

Huang, 1988, Variational principle of hybrid energy and the fundamentals of 3-D laminate theory — A new approach for the analysis of interlaminar stresses in composite laminates, Appl. Math. Mech., 9, 649, 10.1007/BF02465694

Pian, 1990, Stress analysis of laminated composites by hybrid finite elements, 363

Jing, 1989, Partial hybrid stress element for analysis of thick laminated composite plates, Int. J. Numer. Methods Eng., 28, 2813, 10.1002/nme.1620281207

Reissner, 1965, A note on variational principles in elasticity, Int. J. Solids Struct., 1, 93, 10.1016/0020-7683(65)90018-1

Sze, 1993, Hybrid plane quadrilateral element with corner rotations, J. Struct. Eng. ASCE, 119, 2552, 10.1061/(ASCE)0733-9445(1993)119:9(2552)

Ibrahimegovic, 1990, A robust quadrilateral membrane finite element with drilling degrees of freedom, Int. J. Numer. Methods. Eng., 30, 445, 10.1002/nme.1620300305

Chen, 1992, Formulation of hybrid/mixed membrane elements with drilling degrees of freedom, 76

Pian, 1993, Some recent advances in assumed stress hybrid finite elements, 397

Irons, 1976, The semi-Loof shell element, 197

Pian, 1981, On hybrid and mixed finite element methods, 1

Pian, 1986, Hybrid plate elements based on balanced stresses and displacements, 244

Wang, 1988, Hybrid semiLoof element for buckling of thin-walled structures, Comput. Struct., 30, 811, 10.1016/0045-7949(88)90109-5

Fraeijs de Veubeke, 1968, An equilibrium model for plate bending, Int. J. Solids Struct., 4, 447, 10.1016/0020-7683(68)90049-8

Tong, 1973, A hybrid-element approach to crack problems in plane elasticity, Int. J. Numer. Methods Eng., 7, 297, 10.1002/nme.1620070307

Tong, 1984, A hybrid finite element method for damage tolerance analysis, Comput. Struct., 19, 263, 10.1016/0045-7949(84)90226-8

Pian, 1978, Three-dimensional fracture analysis by assumed stress hybrid elements, 373

Atluri, 1975, Three-dimensional linear fracture mechanics analysis by a displacement hybrid finite element model

Kuna, 1990, A mixed hybrid finite element for three-dimensional elastic crack analysis, Int. J. Fracture, 45, 65, 10.1007/BF00012610

Hartranft, 1969, The use of eigenfunction expansions in the general solution of three-dimensional crack problems, J. Math. Mech., 19, 123

Chow, 1995, Calculation of stress intensity factors for an interfacial crack between dissimilar anisotropic media, using a hybrid element method and the mutual integral, Comput. Mech., 15, 546, 10.1007/BF00350267

Beom, 1994

Jirousek, 1977, A powerful finite element for plate bending, Comput. Methods Appl. Mech. Eng., 12, 77, 10.1016/0045-7825(77)90052-4

Jirousek, 1982, Large finite elements method for the solution of problems in the theory of elasticity, Comput. Structur., 15, 575, 10.1016/0045-7949(82)90009-8

Jirousek, 1987, Hybrid-Trefftz plate bending elements with p-method capabilities, Int. J. Numer. Methods Eng., 24, 1367, 10.1002/nme.1620240712

Jirousek, 1992, Hybrid-Trefftz plane elasticity elements with p-method capabilities, Int. J. Numer. Methods Eng., 35, 1443, 10.1002/nme.1620350705

Jirousek, 1990, Adaptivity in hybrid-Trefftz finite element formulation, Int. J. Numer. Methods Eng., 29, 391, 10.1002/nme.1620290212

Jirusek, 1993, Dual hybrid-Trefftz element formulation based on independent boundary traction frame, Int. J. Numer. Methods Eng., 36, 2955, 10.1002/nme.1620361707

Ghosh, 1991, A two dimensional automatic mesh generator for finite element analysis for random composites, Comput. Struct., 41, 241, 10.1016/0045-7949(91)90428-O

Ghosh, 1994, Voronoi cell finite element, Comput. Struct., 50, 33, 10.1016/0045-7949(94)90435-9

Accorsi, 1988, A method for modeling microstructural material discontinuities in a finite element analysis, Int. J. Numer. Methods Eng., 26, 2187, 10.1002/nme.1620261004

Zhang, 1994, Problems related to application of eigenstrains in a finite element analysis, Int. J. Numer. Methods Eng., 37, 3185, 10.1002/nme.1620371811

Ghosh, 1993, A material based finite element analysis of heterogeneous media involving Dirichlet tessellations, Comput. Methods Appl. Mech. Eng., 104, 211, 10.1016/0045-7825(93)90198-7

Ghosh, 1995, Elastic-Plastic analysis of arbitrary heterogeneous materials with the Voronoi cell finite element method, Comput. Methods. Appl. Mech. Eng., 121, 373, 10.1016/0045-7825(94)00687-I

Ghosh, 1995, Voronoi cell finite element model based on microplar theory of thermoelasticity for heterogeneous materials, Int. J. Numer. Methods Eng., 38, 1361, 10.1002/nme.1620380808

Zhang, 1995, A finite element method for heterogeneous materials with randomly dispersed elastic inclusions, Finite Elements Anal. Des., 19, 45, 10.1016/0168-874X(94)00056-L

Piltner, 1985, Special finite elements with holes and internal cracks, Int. J. Numer. Methods Eng., 21, 1471, 10.1002/nme.1620210809

Zhang, 1995, A finite element method for heterogeneous materials with randomly dispersed rigid inclusions, Int. J. Numer. Methods Eng., 38, 1635, 10.1002/nme.1620381004

Bar-Yoseph, 1966, New variational-asymptotic formulations for interlaminar stress analysis in laminated plates, J. Appl. Math. Phys. (Z. Angew. Math. Phys.), 37, 305, 10.1007/BF00946753

Bar-Yoseph, 1988, On the nature of the free stress singularity in composite laminated plates, Int. J. Numer. Methods Eng., 26, 1507, 10.1002/nme.1620260704

Bar-Yoseph, 1988, New variational-asymptotic formulations for 3-D stress analyses of laminated composite shells with a circular hole, J. Appl. Math. Phys. (Z. Angew. Math. Phys.), 39, 682, 10.1007/BF00948730

Avrashi, 1991, Mixed-hybrid finite strip method for 3-D composite structures, Comput. Mech., 7, 253, 10.1007/BF00370039

Avrashi, 1992, Variational asymptotic study of a cylindrical embedded delamination in composites, Comput. Struct., 44, 89, 10.1016/0045-7949(92)90227-Q

Cheung, 1976

Cannarozzi, 1987, A hybrid model for prismatic solids, Int. J. Numer. Methods Eng., 24, 63, 10.1002/nme.1620240402

Thông tin
Thông tin xuất bản

Finite Elements in Analysis and Design

Tập 21

5-20

Thông tin tác giả