Relating plasticity to dislocation properties by data analysis: scaling vs. machine learning approaches

Materials Theory - Tập 7 Số 1
Stefan Hiemer1, Haidong Fan2, Michael Zaiser1
1Department of Materials Science, WW8-Materials Simulation, Friedrich-Alexander Universität Erlangen-Nürnberg, Dr.-Mack-Str. 77, 90762, Fürth, Germany
2Department of Mechanics, Sichuan University, Chengdu, People’s Republic of China

Tóm tắt

AbstractPlasticity modelling has long relied on phenomenological models based on ad-hoc assumption of constitutive relations, which are then fitted to limited data. Other work is based on the consideration of physical mechanisms which seek to establish a physical foundation of the observed plastic deformation behavior through identification of isolated defect processes (’mechanisms’) which are observed either experimentally or in simulations and then serve to formulate so-called physically based models. Neither of these approaches is adequate to capture the complexity of plastic deformation which belongs into the realm of emergent collective phenomena, and to understand the complex interplay of multiple deformation pathways which is at the core of modern high performance structural materials. Data based approaches offer alternative pathways towards plasticity modelling whose strengths and limitations we explore here for a simple example, namely the interplay between rate and dislocation density dependent strengthening mechanisms in fcc metals.

Từ khóa


Tài liệu tham khảo

M. Abadi, A. Agarwal, P. Barham, E. Brevdo, Z. Chen, C. Citro, G.S. Corrado, A. Davis, J. Dean, M. Devin, et al. Tensorflow: Large-scale machine learning on heterogeneous systems. arXiv:1603.04467. (2016)

J. Bailey, P. Hirsch, The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver. Philos. Mag. 5(53), 485–497 (1960)

C.M. Bishop, N.M. Nasrabadi, Pattern recognition and machine learning, vol. 4 (Springer, 2006)

S. Biswas, D. Fernandez Castellanos, M. Zaiser, Prediction of creep failure time using machine learning. Sci. Rep. 10(1), 1–11 (2010)

F. Chollet, et al. keras. (2015), https://keras.io. Accessed 20 Dec 2022

H. Fan, Q. Wang, J.A. El-Awady, D. Raabe, M. Zaiser, Strain rate dependency of dislocation plasticity. Nat. Commun. 12(1845), 1–11 (2021)

F. Font-Clos, M. Zanchi, S. Hiemer, S. Bonfanti, R. Guerra, M. Zaiser, S. Zapperi, Predicting the failure of two-dimensional silica glasses. Nat. Commun. 13(2820), 1-11 (2022)

P. Hähner, M. Zaiser, Dislocation dynamics and work hardening of fractal dislocation cell structures. Mater. Sci. Eng. A 272, 443–454 (1999)

T. Hastie, R. Tibshirani, J.H. Friedman, J.H. Friedman, The elements of statistical learning: data mining, inference, and prediction, vol. 2 (Springer, New York, 2009), pp. 241–249

S. Hiemer, S. Zapperi, From mechanism-based to data-driven approaches in materials science. Mater. Theory 5(1), 1–9 (2021)

P. Hirsch, D. Warrington, The flow stress of aluminium and copper at high temperatures. Philos. Mag. 6(66), 735–768 (1961)

D.P. Kingma, J. Ba, Adam: A method for stochastic optimization. arXiv preprint arXiv:1412.6980 (2014)

H. Mecking, U. Kocks, Kinetics of flow and strain-hardening. Acta Metall. 29(11), 1865–1875 (1981)

M.C. Miguel, A. Vespignani, M. Zaiser, S. Zapperi, Dislocation jamming and andrade creep. Phys. Rev. Lett. 89(16), 165501 (2002)

N.F. Mott, Bakerian lecture: dislocations, plastic flow and creep. Proc. R. Soc. Lond. Ser. A. Math. Phys. Sci. 220(1140), 1–14 (1953)

F. Pedregosa, G. Varoquaux, A. Gramfort, V. Michel, B. Thirion, O. Grisel, M. Blondel, P. Prettenhofer, R. Weiss, V. Dubourg et al., Scikit-learn: Machine learning in python. J. Mach. Learn. Res. 12, 2825–2830 (2011)

P. Rudolph, C. Frank-Rotsch, U. Juda, F. Kiessling, Scaling of dislocation cells in gaas crystals by global numeric simulation and their restraints by in situ control of stoichiometry. Mater. Sci. Engng. A 400–401, 170–174 (2005)

M. Sauzay, L.P. Kubin, Scaling laws for dislocation microstructures in monotonic and cyclic deformation of fcc metals. Prog. Mater. Sci. 56(6, SI), 725–784 (2011). https://doi.org/10.1016/j.pmatsci.2011.01.006

A. Seeger, J. Diehl, S. Mader, H. Rebstock, Work-hardening and work-softening of face-centred cubic metal crystals. Phil. Mag. 2(15), 323–350 (1957)

M. Stricker, M. Sudmanns, K. Schulz, T. Hochrainer, D. Weygand, Dislocation multiplication in stage ii deformation of fcc multi-slip single crystals. J. Mech. Phys. Solids 119, 319–333 (2018)

G.I. Taylor, The mechanism of plastic deformation of crystals. part i.—theoretical. Proc. R. Soc. Lond. Ser. A Containing Pap. Math. Phys. Character 145(855), 362–387 (1934)

T. Webb, Z. Dulberg, S. Frankland, A. Petrov, R. O’Reilly, J. Cohen, Learning representations that support extrapolation. in International conference on machine learning (PMLR, 2020), pp. 10136–10146

R. Wu, M. Zaiser, Thermodynamic considerations on a class of dislocation-based constitutive models. J. Mech. Phys. Solids 159, 104735 (2022)

M. Zaiser, P. Hähner, The flow stress of fractal dislocation arrangements. Mater. Sci. Eng. A 270, 299–307 (1999)

M. Zaiser, S. Sandfeld, Scaling properties of dislocation simulations in the similitude regime. Model Simul. Mater. Sc. 22(6), 065012 (2014)

Thông tin
Thông tin xuất bản

Materials Theory

Tập 7 Số 1

Thông tin tác giả