Recent advances in solar photovoltaic materials and systems for energy storage applications: a review
Tóm tắt
In recent years, solar photovoltaic technology has experienced significant advances in both materials and systems, leading to improvements in efficiency, cost, and energy storage capacity. These advances have made solar photovoltaic technology a more viable option for renewable energy generation and energy storage. However, intermittent is a major limitation of solar energy, and energy storage systems are the preferred solution to these challenges where electric power generation is applicable. Hence, the type of energy storage system depends on the technology used for electrical generation. Furthermore, the growing need for renewable energy sources and the necessity for long-term energy solutions have fueled research into novel materials for solar photovoltaic systems. Researchers have concentrated on increasing the efficiency of solar cells by creating novel materials that can collect and convert sunlight into power. This study provides an overview of the recent research and development of materials for solar photovoltaic devices. The use of renewable energy sources, such as solar power, is becoming increasingly important to address the growing energy demand and mitigate the impact of climate change. Hence, the development of materials with superior properties, such as higher efficiency, lower cost, and improved durability, can significantly enhance the performance of solar panels and enable the creation of new, more efficient photovoltaic devices. This review discusses recent progress in the field of materials for solar photovoltaic devices. The challenges and opportunities associated with these materials are also explored, including scalability, stability, and economic feasibility. The development of novel materials for solar photovoltaic devices holds great potential to revolutionize the field of renewable energy. With ongoing research and technological advancements, scientists and engineers have been able to design materials with superior properties such as higher efficiency, lower cost, and improved durability. These materials can be used to enhance the performance of existing solar panels and enable the creation of new, more efficient photovoltaic devices. The adoption of these materials could have significant implications for the transition toward a more sustainable and environmentally friendly energy system. However, there are still challenges to be addressed, such as scalability, stability, potential environmental effects, and economic feasibility, before these materials can be widely implemented. Nonetheless, the progress made in this field is promising and continued reports on the research and development of materials for solar photovoltaic devices are crucial for achieving a sustainable future. The adoption of novel materials in solar photovoltaic devices could lead to a more sustainable and environmentally friendly energy system, but further research and development are needed to overcome current limitations and enable large-scale implementation.
Tài liệu tham khảo
Gong J, Liang J, Sumathy K (2012) Review on dye-sensitized solar cells (DSSCs): fundamental concepts and novel materials. Renew Sustain Energy Rev 16(8):5848–5860
Dubacheva GV, Liang CK, Bassani DM (2012) Functional monolayers from carbon nanostructures–fullerenes, carbon nanotubes, and graphene–as novel materials for solar energy conversion. Coord Chem Rev 256(21–22):2628–2639
Lim EL, Yap CC, Jumali MHH, Teridi MAM, Teh CH (2018) A mini review: can graphene be a novel material for perovskite solar cell applications? Nano-micro Lett 10:1–12
Ohshita Y, Suzuki H, Kojima N, Tanaka T, Honda T, Inagaki M, Yamaguchi M (2011) Novel material for super high efficiency multi-junction solar cells. J Cryst Growth 318(1):328–331
Chen J, Cao Y (2009) Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices. Acc Chem Res 42(11):1709–1718
Hayat MB, Ali D, Monyake KC, Alagha L, Ahmed N (2019) Solar energy—a look into power generation, challenges, and a solar-powered future. Int J Energy Res 43(3):1049–1067
Casper F, Graf T, Chadov S, Balke B, Felser C (2012) Half-Heusler compounds: novel materials for energy and spintronic applications. Semicond Sci Technol 27(6):063001
Mozer AJ, Sariciftci NS (2006) Conjugated polymer photovoltaic devices and materials. C R Chim 9(5–6):568–577
Kannan N, Vakeesan D (2016) Solar energy for future world: a review. Renew Sustain Energy Rev 62:1092–1105
Meinel AB, Meinel MP (1977) Applied solar energy: an introduction. NASA STI/Recon Tech Report A 77:33445
Gordon J, Gordon JM (eds) (2001) Solar energy: the state of the art: ISES position papers
Chen CJ (2011) Physics of solar energy. Wiley
Sayigh AAM (ed) (2012) Solar energy engineering. Elsevier
Gong J, Li C, Wasielewski MR (2019) Advances in solar energy conversion. Chem Soc Rev 48(7):1862–1864
Fang B, Xing Z, Sun D, Li Z, Zhou W (2022) Hollow semiconductor photocatalysts for solar energy conversion. Adv Powder Mater 1(2):100021
Rabaia MKH, Abdelkareem MA, Sayed ET, Elsaid K, Chae KJ, Wilberforce T, Olabi AG (2021) Environmental impacts of solar energy systems: a review. Sci Total Environ 754:141989
Sodiqjon K, Begyor S, Aleksandr K, Farrukh D, Mukhtasar M, Akbarjon A (2022) Prospective aspects of using solar energy. J New Century Innovat 18(1):142–148
Chasta G, Suthar D, Thakur A, Kannan MD, Dhaka MS (2022) Comprehensive investigation on influence of copper doping on physical properties of CdSe thin films for solar cell applications. Mater Res Bull 152:111845
Ding T, Zhou Y, Ong WL, Ho GW (2021) Hybrid solar-driven interfacial evaporation systems: beyond water production towards high solar energy utilization. Mater Today 42:178–191
Hoeven MVD (2015) Technology roadmap: solar photovoltaic energy. International Energy Agency, Paris, France
Siecker J, Kusakana K, Numbi EB (2017) A review of solar photovoltaic systems cooling technologies. Renew Sustain Energy Rev 79:192–203
Saga T (2010) Advances in crystalline silicon solar cell technology for industrial mass production. NPG Asia Mater 2(3):96–102
Santbergen R, van Zolingen RC (2008) The absorption factor of crystalline silicon PV cells: a numerical and experimental study. Sol Energy Mater Sol Cells 92(4):432–444
Liang TS, Pravettoni M, Deline C, Stein JS, Kopecek R, Singh JP, Luo W, Wang Y, Aberle AG, Khoo YS (2019) A review of crystalline silicon bifacial photovoltaic performance characterisation and simulation. Energy Environ Sci 12(1):116–148
Zhao J, Xu Z, Law MK, Heidari H, Abdellatif SO, Imran MA, Ghannam R (2021) Simulation of crystalline silicon photovoltaic cells for wearable applications. IEEE Access 9:20868–20877
Benda V, Černá L (2020) PV cells and modules–State of the art, limits and trends. Heliyon 6(12):e05666
Sun Z, Chen X, He Y, Li J, Wang J, Yan H, Zhang Y (2022) Toward efficiency limits of crystalline silicon solar cells: recent progress in high-efficiency silicon heterojunction solar cells. Adv Energy Mater 12(23):2200015
Nadia AR, Isa NAM, Desa MKM (2018) Advances in solar photovoltaic tracking systems: a review. Renew Sustain Energy Rev 82:2548–2569
Hightower M, Pierce SA (2008) The energy challenge. Nature 452(7185):285–286
Chong KK, Wong CW (2009) General formula for on-axis sun-tracking system and its application in improving tracking accuracy of solar collector. Sol Energy 83(3):298–305
Nsengiyumva W, Chen SG, Hu L, Chen X (2018) Recent advancements and challenges in solar tracking systems (STS): a review. Renew Sustain Energy Rev 81:250–279
Jamroen C, Komkum P, Kohsri S, Himananto W, Panupintu S, Unkat S (2020) A low-cost dual-axis solar tracking system based on digital logic design: Design and implementation. Sustain Energy Technol Assessm 37:100618
Ibarra Michel J, Dréon J, Boccard M, Bullock J, Macco B (2023) Carrier-selective contacts using metal compounds for crystalline silicon solar cells. Progress Photovoltaics Res Appl 31(4):380–413
Jamroen C, Komkum P, Kohsri S, Himananto W, Panupintu S, Unkat S (2020) A low-cost dual-axis solar tracking system based on digital logic design: design and implementation. Sustain Energy Technol Assess 37:100618
Chowdhury ME, Khandakar A, Hossain B, Abouhasera R (2019) A low-cost closed-loop solar tracking system based on the sun position algorithm. J Sensors
Chee KW, Ghosh BK, Saad I, Hong Y, Xia QH, Gao P, Ye J, Ding ZJ (2022) Recent advancements in carrier-selective contacts for high-efficiency crystalline silicon solar cells: Industrially evolving approach. Nano Energy 95:106899
Costals ER, Masmitjà G, Almache E, Pusay B, Tiwari K, Saucedo E, Raj CJ, Kim BC, Puigdollers J, Martin I, Voz C (2022) Atomic layer deposition of vanadium oxide films for crystalline silicon solar cells. Mater Adv 3(1):337–345
Han C, Yang G, Procel P, O’Connor D, Zhao Y, Gopalakrishnan A, Zhang X, Zeman M, Mazzarella L, Isabella O (2022) Controllable simultaneous bifacial Cu-plating for high-efficiency crystalline silicon solar cells. Solar RRL 6(6):2100810
Pham DP, Yi J (2022) Dopant-grading proposal for polysilicon passivating contact in crystalline silicon solar cells. J Power Sources 522:231005
.Skompska, M. (2010) Hybrid conjugated polymer/semiconductor photovoltaic cells. Synth Met 160(1–2):1–15
Singh A, Sharma A, Rajput S, Bose A, Hu X (2022) An investigation on hybrid particle swarm optimization algorithms for parameter optimization of PV cells. Electronics 11(6):909
Cotfas DT, Cotfas PA, Mahmoudinezhad S, Louzazni M (2022) Critical factors and parameters for hybrid photovoltaic-thermoelectric systems; review. Appl Therm Eng, p 118977
Tang Y, Varyambath A, Ding Y, Chen B, Huang X, Zhang Y, Yu DG, Kim I, Song W (2022) Porous organic polymers for drug delivery: hierarchical pore structures, variable morphologies, and biological properties. Biomater Sci
Kim JH, Kang DW, Yun H, Kang M, Singh N, Kim JS, Hong CS (2022) Post-synthetic modifications in porous organic polymers for biomedical and related applications. Chem Soc Rev 51(1):43–56
Zhu Y, Xu P, Zhang X, Wu D (2022) Emerging porous organic polymers for biomedical applications. Chem Soc Rev 51(4):1377–1414
Marí-Guaita J, Bouich A, Shafi MA, Bouich A, Marí B (2022) Investigation on the stability and efficiency of MAPbI3 and MASnI3 thin films for solar cells. Phys Status Solidi 219(5):2100664
Tarbi A, Chtouki T, Bouich A, Elkouari Y, Erguig H, Migalska-Zalas A, Aissat A (2022) InP/InGaAsP thin films based solar cells: lattice mismatch impact on efficiency. Opt Mater 131:112704
Chaudhry FA, Escandell L, López-Fraguas E, Vergaz R, Sánchez-Pena JM, García-Cámara B (2022) Light absorption enhancement in thin film GaAs solar cells using dielectric nanoparticles. Sci Rep 12(1):9240
O’regan B, Grätzel M (1991) A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films. Nature 353(6346):737–740
Bandara TMWJ, Hansadi JMC, Bella F (2022) A review of textile dye-sensitized solar cells for wearable electronics. Ionics 28(6):2563–2583
Shahzad N, Perveen T, Pugliese D, Haq S, Fatima N, Salman SM, Tagliaferro A, Shahzad MI (2022) Counter electrode materials based on carbon nanotubes for dye-sensitized solar cells. Renew Sustain Energy Rev 159:112196
Alizadeh A, Roudgar-Amoli M, Bonyad-Shekalgourabi SM, Shariatinia Z, Mahmoudi M, Saadat F (2022) Dye sensitized solar cells go beyond using perovskite and spinel inorganic materials: a review. Renew Sustain Energy Rev 157:112047
Venkatesan S, Lin WH, Hsu TH, Teng H, Lee YL (2022) Indoor dye-sensitized solar cells with efficiencies surpassing 26% using polymeric counter electrodes. ACS Sustain Chem Eng 10(7):2473–2483
Devadiga D, Selvakumar M, Shetty P, Santosh MS (2022) The integration of flexible dye-sensitized solar cells and storage devices towards wearable self-charging power systems: a review. Renew Sustain Energy Rev 159:112252
Kim JH, Kim DH, So JH, Koo HJ (2022) Toward eco-friendly dye-sensitized solar cells (DSSCs): natural dyes and aqueous electrolytes. Energies 15(1):219
De Freitas ES, Da Silva PB, Chorilli M, Batista AA, Lopes EDO, da Silva MM, Leite CQF, Pavan FR (2014) Nanostructured lipid systems as a strategy to improve the in vitro cytotoxicity of ruthenium (II) compounds. Molecules 19(5):5999–6008
Dragutan I, Dragutan V, Demonceau A (2017) Special issue on ruthenium complexes. Molecules 22(2):255
Tojo G, Fernández M, Tojo G, Fernández M (2007) Ruthenium tetroxide and other ruthenium compounds. Oxidation of primary alcohols to carboxylic acids: a guide to current common practice, pp 61–78
Yadav SC, Sharma A, Devan RS, Shirage PM (2022) Role of different counter electrodes on performance of TiO2 based dye-sensitized solar cell (DSSC) fabricated with dye extracted from Hibiscus Sabdariffa as sensitizer. Opt Mater 124:112066
Grätzel M (2003) Dye-sensitized solar cells. J Photochem Photobiol, C 4(2):145–153
Hagfeldt A, Boschloo G, Sun L, Kloo L, Pettersson H (2010) Dye-sensitized solar cells. Chem Rev 110(11):6595–6663
Wei D (2010) Dye sensitized solar cells. Int J Mol Sci 11(3):1103–1113
Kalyanasundaram K (2010) Dye-sensitized solar cells. CRC Press
Nazeeruddin MK, Baranoff E, Grätzel M (2011) Dye-sensitized solar cells: a brief overview. Sol Energy 85(6):1172–1178
Chiba Y, Islam A, Watanabe Y, Komiya R, Koide N, Han L (2006) Dye-sensitized solar cells with conversion efficiency of 111%. Jpn J Appl Phys 45(7L):L638
Hardin BE, Snaith HJ, McGehee MD (2012) The renaissance of dye-sensitized solar cells. Nat Photonics 6(3):162–169
Tawalbeh M, Al-Othman A, Kafiah F, Abdelsalam E, Almomani F, Alkasrawi M (2021) Environmental impacts of solar photovoltaic systems: a critical review of recent progress and future outlook. Sci Total Environ 759:143528
Smith L, Ibn-Mohammed T, Yang F, Reaney IM, Sinclair DC, Koh SL (2019) Comparative environmental profile assessments of commercial and novel material structures for solid oxide fuel cells. Appl Energy 235:1300–1313
Blanco CF, Cucurachi S, Peijnenburg WJ, Beames A, Vijver MG (2020) Are technological developments improving the environmental sustainability of photovoltaic electricity? Energ Technol 8(11):1901064
Chetyrkina MR, Kameneva L, Mishchenko DV, Klimanova EN, Sashenkova TE, Allayarova UY, Kostyuk SV, Frolova LA, Aldoshin SM, Troshin PA (2023) Lead, tin, bismuth or organics: assessment of potential environmental and human health hazards originating from mature perovskite PV technology. Sol Energy Mater Sol Cells 252:112177
Li C, Wang X, Bi E, Jiang F, Park SM, Li Y, Chen L, Wang Z, Zeng L, Chen H, Liu Y (2023) Rational design of Lewis base molecules for stable and efficient inverted perovskite solar cells. Science 379(6633):690–694
Ning Z, Fu Y, Tian H (2010) Improvement of dye-sensitized solar cells: what we know and what we need to know. Energy Environ Sci 3(9):1170–1181
Law M, Greene LE, Johnson JC, Saykally R, Yang P (2005) Nanowire dye-sensitized solar cells. Nat Mater 4(6):455–459
Kashtiban RJ, Patrick CE, Ramasse Q, Walton RI, Sloan J (2022) Picoperovskites: the smallest conceivable isolated halide perovskite structures formed within carbon nanotubes. Adv Mater, 2208575
Tan S, Huang T, Yavuz I, Wang R, Yoon TW, Xu M, Xing Q, Park K, Lee DK, Chen CH, Zheng R (2022) Stability-limiting heterointerfaces of perovskite photovoltaics. Nature 605(7909):268–273
Lin R, Xu J, Wei M, Wang Y, Qin Z, Liu Z, Wu J, Xiao K, Chen B, Park SM, Chen G (2022) All-perovskite tandem solar cells with improved grain surface passivation. Nature 603(7899):73–78
Li H, Zhou J, Tan L, Li M, Jiang C, Wang S, Zhao X, Liu Y, Zhang Y, Ye Y, Tress W (2022) Sequential vacuum-evaporated perovskite solar cells with more than 24% efficiency. Sci Adv 8(28):eabo7422
DuBose JT, Kamat PV (2022) Efficacy of perovskite photocatalysis: challenges to overcome. ACS Energy Lett 7(6):1994–2011
Luo J, Lin F, Xia J, Yang H, Zhang R, Malik HA, Shu H, Wan Z, Han K, Wang R, Yao X (2021) An efficient and hydrophobic molecular doping in perovskite solar cells. Nano Energy 82:105751
Wu S, Zhang J, Li Z, Liu D, Qin M, Cheung SH, Lu X, Lei D, So SK, Zhu Z, Jen AKY (2020) Modulation of defects and interfaces through alkylammonium interlayer for efficient inverted perovskite solar cells. Joule 4(6):1248–1262
Friederich P, Fediai A, Kaiser S, Konrad M, Jung N, Wenzel W (2019) Toward design of novel materials for organic electronics. Adv Mater 31(26):1808256
Yang Y, Börjesson K (2022) Electroactive covalent organic frameworks: a new choice for organic electronics. Trends Chem 4(1):60–75
Tareen AK, Khan K, Rehman S, Iqbal M, Yu J, Zhou Z, Yin J, Zhang H (2022) Recent development in emerging phosphorene based novel materials: progress, challenges, prospects and their fascinating sensing applications. Prog Solid State Chem 65:100336
Mahato N, Sharma K, Sinha M, Baral ER, Koteswararao R, Dhyani A, Cho MH, Cho S (2020) Bio-sorbents, industrially important chemicals and novel materials from citrus processing waste as a sustainable and renewable bioresource: a review. J Adv Res 23:61–82
Verduci R, Romano V, Brunetti G, Yaghoobi Nia N, Di Carlo A, D’Angelo G, Ciminelli C (2022) Solar energy in space applications: review and technology perspectives. Adv Energy Mater 12(29):2200125
Park NG (2020) Research direction toward scalable, stable, and high efficiency perovskite solar cells. Adv Energy Mater 10(13):1903106
Green M, Dunlop E, Hohl-Ebinger J, Yoshita M, Kopidakis N, Hao X (2021) Solar cell efficiency tables (version 57). Prog Photovoltaics Res Appl 29(1):3–15
Li Z, Klein TR, Kim DH, Yang M, Berry JJ, Van Hest MF, Zhu K (2018) Scalable fabrication of perovskite solar cells. Nat Rev Mater 3(4):1–20
Altinkaya C, Aydin E, Ugur E, Isikgor FH, Subbiah AS, De Bastiani M, Liu J, Babayigit A, Allen TG, Laquai F, Yildiz A (2021) Tin oxide electron-selective layers for efficient, stable, and scalable perovskite solar cells. Adv Mater 33(15):2005504
Angmo D, Gevorgyan SA, Larsen-Olsen TT, Søndergaard RR, Hösel M, Jørgensen M, Gupta R, Kulkarni GU, Krebs FC (2013) Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules. Org Electron 14(3):984–994
Kim M, Jeong J, Lu H, Lee TK, Eickemeyer FT, Liu Y, Choi IW, Choi SJ, Jo Y, Kim HB, Mo SI (2022) Conformal quantum dot–SnO2 layers as electron transporters for efficient perovskite solar cells. Science 375(6578):302–306
Wang HP, Li S, Liu X, Shi Z, Fang X, He JH (2021) Low-dimensional metal halide Perovskite photodetectors. Adv Mater 33(7):2003309
Lee CC, Chen CI, Liao YT, Wu KCW, Chueh CC (2019) Enhancing efficiency and stability of photovoltaic cells by using perovskite/Zr-MOF heterojunction including bilayer and hybrid structures. Adv Sci 6(5):1801715
Exposing unsaturated Cu1-O2 sites in nanoscale Cu-MOF for efficient electrocatalytic hydrogen evolution
Zou YH, Huang YB, Si DH, Yin Q, Wu QJ, Weng Z, Cao R (2021) Porous metal–organic framework liquids for enhanced CO2 adsorption and catalytic conversion. Angew Chem 133(38):21083–21088
Ehrling S, Reynolds EM, Bon V, Senkovska I, Gorelik TE, Evans JD, Rauche M, Mendt M, Weiss MS, Pöppl A, Brunner E (2021) Adaptive response of a metal–organic framework through reversible disorder–disorder transitions. Nat Chem 13(6):568–574
Nicks J, Sasitharan K, Prasad RR, Ashworth DJ, Foster JA (2021) Metal–organic framework nanosheets: programmable 2D materials for catalysis, sensing, electronics, and separation applications. Adv Func Mater 31(42):2103723
Juarez-Perez EJ, Ono LK, Maeda M, Jiang Y, Hawash Z, Qi Y (2018) Photodecomposition and thermal decomposition in methylammonium halide lead perovskites and inferred design principles to increase photovoltaic device stability. J Mater Chem A 6(20):9604–9612
Ueoka N, Oku T (2018) Stability characterization of PbI2-added CH3NH3PbI3–x Cl x photovoltaic devices. ACS Appl Mater Interfaces 10(51):44443–44451
Rajvikram M, Leoponraj S (2018) A method to attain power optimality and efficiency in solar panel. Beni-Suef Univ J Basic Appl Sci 7(4):705–708
Abouelregal AE, Akgöz B, Civalek Ö (2023) Magneto-thermoelastic interactions in an unbounded orthotropic viscoelastic solid under the Hall current effect by the fourth-order Moore–Gibson–Thompson equation. Comput Math Appl 141:102–115
Civalek Ö, Uzun B, Yaylı MÖ (2022) An effective analytical method for buckling solutions of a restrained FGM nonlocal beam. Comput Appl Math 41(2):67
Jalaei MH, Thai HT, Civalek Ӧ (2022) On viscoelastic transient response of magnetically imperfect functionally graded nanobeams. Int J Eng Sci 172:103629
Numanoğlu HM, Ersoy H, Akgöz B, Civalek Ö (2022) A new eigenvalue problem solver for thermo-mechanical vibration of Timoshenko nanobeams by an innovative nonlocal finite element method. Math Methods Appl Sci 45(5):2592–2614
Abouelregal AE, Ersoy H, Civalek Ö (2021) Solution of Moore–Gibson–Thompson equation of an unbounded medium with a cylindrical hole. Mathematics 9(13):1536
Akgöz B, Civalek Ö (2022) Buckling analysis of functionally graded tapered microbeams via Rayleigh-Ritz method. Mathematics 10(23):4429
Dastjerdi S, Akgöz B, Civalek Ö (2020) On the effect of viscoelasticity on behavior of gyroscopes. Int J Eng Sci 149:103236
Ashery MH, Elnouby M, EL-Maghraby EM, Elsehly EM (2023) Structural control of V2O5 nanoparticles via a thermal decomposition method for prospective photocatalytic applications. Beni-Suef Univ J Basic Appl Sci 12(1):1–15
Zhu R, Pan E, Roy AK (2007) Molecular dynamics study of the stress–strain behavior of carbon-nanotube reinforced Epon 862 composites. Mater Sci Eng, A 447(1–2):51–57
Sui G, Zhong W, Yang X, Zhao S (2007) Processing and material characteristics of a carbon-nanotube-reinforced natural rubber. Macromol Mater Eng 292(9):1020–1026
Medupin RO, Abubakre OK, Abdulkareem AS, Muriana RA, Abdulrahman AS (2019) Carbon nanotube reinforced natural rubber nanocomposite for anthropomorphic prosthetic foot purpose. Sci Rep 9(1):1–11