Recent Advances in Crystallization control
Tài liệu tham khảo
Agarwal, 2003, In situ monitoring of calcium carbonate polymorphs during batch crystallization in the presence of polymeric additives using Raman spectroscopy, Crystal Growth & Design, 3, 941, 10.1021/cg0256125
Ålander, 2004, Agglomeration of paracetamol during crystallization in pure and mixed solvents, Ind Eng Chem Res, 43, 629, 10.1021/ie0301280
Barrett, 1999, In-line FBRM monitoring of particle size in dilute agitated suspensions, Particle & Particle Systems Characterization, 16, 207, 10.1002/(SICI)1521-4117(199910)16:5<207::AID-PPSC207>3.0.CO;2-U
Barrett, 2002, Characterizing the metastable zone width and solubility curve using Lasentec FBRM and PVM, Chem Eng Res Des, 80, 799, 10.1205/026387602320776876
Barthe, 2006, Utilization of focused beam reflectance measurement in the control of crystal size distribution in a batch cooled crystallizer, Chem Eng Technol, 29, 206, 10.1002/ceat.200500364
Beckmann, 2000, Seeding the desired polymorph: background, possibilities, limitations, and case studies, Organic Process Research & Development, 4, 372, 10.1021/op0000778
BernardMichel, 1997, Classification of crystal shape using Fourier descriptors and mathematical morphology, Particle & Particle Systems Characterization, 14, 193, 10.1002/ppsc.199700041
Bloemen, 2005, Transformation of chord length distributions into particle size distributions using least squares techniques, Particulate Science and Technology, 23, 377, 10.1080/02726350500212996
Bordui, 1985, Computer-controlled crystal growth of KDP from aqueous solution, Journal of Crystal Growth, 72, 756, 10.1016/0022-0248(85)90235-0
Brittain, 2004, Fluorescence studies of the transformation of carbamazepine anhydrate form III to its dihydrate phase, Journal of Pharmaceutical Sciences, 93, 375, 10.1002/jps.10527
Cardew, 1985, The kinetics of solvent-mediated phase-transformations, Proceedings of the Royal Society of London, Series A, 398, 415, 10.1098/rspa.1985.0043
Chew, J.W., 2006, Experimental investigation of the applicability of FBRM in the control of batch cooling crystallization, MEng thesis, Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore.
Chew, 2007, A comparison between open-loop temperature-control and closed-loop supersaturation-control for cooling crystallization of glycine, Ind Eng Chem Res, 46, 830, 10.1021/ie060446+
Choong, 2004, Novel strategies for optimisation of batch, semi-batch and heating/cooling evaporative crystallization, Chem Eng Sci, 59, 329, 10.1016/j.ces.2003.09.024
Chung, 1999, Optimal seeding in batch crystallization, Canadian Journal of Chemical Engineering, 77, 590, 10.1002/cjce.5450770322
Costa, 2005, Mathematical modelling and optimal control strategy development for an adipic acid crystallization process, Chemical Engineering and Processing, 44, 737, 10.1016/j.cep.2004.08.004
Davey, 1986, Rate controlling processes in solvent-mediated phase-transformations, Journal of Crystal Growth, 79, 648, 10.1016/0022-0248(86)90532-4
De Anda, 2005, Real-time product morphology monitoring in crystallization using imaging technique, AIChE J, 51, 1406, 10.1002/aic.10410
De Clercq, 2004, Focused beam reflectance technique for in situ particle sizing in wastewater treatment settling tanks, Journal of Chemical Technology and Biotechnology, 79, 610, 10.1002/jctb.1028
Dharmayat, 2006, Polymorphic transformation of L-glutamic acid monitored using combined on-line video microscopy and x-ray diffraction, Journal of Crystal Growth, 294, 35, 10.1016/j.jcrysgro.2006.05.072
Doki, 2004, Process control of seeded batch cooling crystallization of the metastable alpha-form glycine using an in-situ ATR-FTIR spectrometer and an in-situ FBRM particle counter, Crystal Growth & Design, 4, 949, 10.1021/cg030070s
Falcon, 2003, Monitoring of antisolvent addition crystallization with Raman spectroscopy, Crystal Growth & Design, 3, 947, 10.1021/cg0340446
Faria, 2003, Quantification of the morphology of sucrose crystals by image analysis, Powder Technol, 133, 54, 10.1016/S0032-5910(03)00078-0
Feng, 2002, ATR-FTIR for determining optimal cooling curves for batch crystallization of succinic acid, Crystal Growth & Design, 2, 449, 10.1021/cg025545e
Fujiwara, 2002, Paracetamol crystallization using laser backscattering and ATR-FTIR spectroscopy: Metastability, agglomeration, and control, Crystal Growth & Design, 2, 363, 10.1021/cg0200098
Fujiwara, 2005, First-principles and direct design approaches for the control of pharmaceutical crystallization, Journal of Process Control, 15, 493, 10.1016/j.jprocont.2004.08.003
Gabas, 1992, Batch crystallization of D-xylose by programmed cooling or by programmed adding of ethanol, Chem Eng Sci, 47, 3148, 10.1016/0009-2509(92)87017-K
Genck, 2000, Better growth in batch crystallisers, Chemical Engineering, 107, 90
Grön, 2003, In-process ATR-FTIR spectroscopy for closed-loop supersaturation control of a batch crystalliser producing monosodium glutamate crystals of defined size, Ind & Engi Chem Res, 42, 198, 10.1021/ie020346d
Gutwald, 1990, Batch cooling crystallization at constant supersaturation: Technique and experimental results, Chemical Engineering & Technology-CET, 13, 229, 10.1002/ceat.270130131
Gutwald, 1994, Evaluation of kinetic-parameters of crystallization from batch and continuous experiments, Separations Technology, 4, 2, 10.1016/0956-9618(94)80001-4
Heath, 2002, Estimating average particle size by focused beam reflectance measurement (FBRM), Particle & Particle Systems Characterization, 19, 84, 10.1002/1521-4117(200205)19:2<84::AID-PPSC84>3.0.CO;2-1
Hentschel, 2003, Selection of descriptors for particle shape characterization, Particle & Particle Systems Characterization, 20, 25, 10.1002/ppsc.200390002
Hu, 2005, Optimal control of a batch cooling seeded crystalliser, Powder Technol, 156, 170, 10.1016/j.powtec.2005.04.010
Hukkanen, 2003, Measurement of particle size distribution in suspension polymerization using in situ laser backscattering, Sensors and Actuators B-Chemical, 96, 451, 10.1016/S0925-4005(03)00600-2
Hussain, 2006, Quality by Design (QbD) – integration of prior knowledge and pharmaceutical development into CMC submission and review
Jones, 1974, Optimal operation of a batch cooling crystalliser, Chem Eng Sci, 29, 1075, 10.1016/0009-2509(74)80106-5
Jones, 1974, Programmed cooling crystallization of potassium sulphate solutions, Chem Eng Sci, 29, 105, 10.1016/0009-2509(74)85036-0
Jones, 1988, Microcomputer programming of dosage rate during batch precipitation, Crystal Research and Technology, 23, 957, 10.1002/crat.2170230802
Karpinski, 2002, Precipitation processes, 151
Kee, 2006, Selective crystallization of metastable α-form of L-glutamic acid through feedback concentration control
Kim, 2003, Crystallisation process development of an active pharmaceutical ingredient and particle engineering via the use of ultrasonics and temperature cycling, Organic Process Research & Development, 7, 997, 10.1021/op034107t
Kim, 2005, Control of the particle properties of a drug substance by crystallization engineering and the effect on drug product formulation, Organic Process Research & Development, 9, 894, 10.1021/op050091q
Kitamura, 2003, Anti-solvent crystallization and transformation of thiazole-derivative polymorphs–I: Effect of addition rate and initial concentrations, Journal of Crystal Growth, 257, 177, 10.1016/S0022-0248(03)01424-6
Kline, 2006, Polymorph and particle size control of ppar compounds pf00287586 and ag035029, Organic Process Research & Development, 10, 203, 10.1021/op050176r
Kubota, 2001, Seeding policy in batch cooling crystallization, Powder Technol, 121, 31, 10.1016/S0032-5910(01)00371-0
Lafferrére, 2004, In situ monitoring of the impact of liquid-liquid phase separation on drug crystallization by seeding, Crystal Growth & Design, 4, 1175, 10.1021/cg0497750
Larsen, 2006, An algorithm for analyzing noisy, in situ images of high-aspect-ratio crystals to monitor particle size distribution, Chem Eng Sci, 61, 5236, 10.1016/j.ces.2006.03.035
Li, 2005, Determination of non-spherical particle size distribution from chord length measurements. Part 1: Theoretical analysis, Chem Eng Sci, 60, 3251, 10.1016/j.ces.2005.01.008
Liotta, 2004, Monitoring and feedback control of supersaturation using ATR-FTIR to produce an active pharmaceutical ingredient of a desired crystal size, Organic Process Research & Development, 8, 488, 10.1021/op049959n
Lung-Somarriba, 2004, Effect of seeded surface area on crystal size distribution in glycine batch cooling crystallization: A seeding methodology, Journal of Crystal Growth, 270, 624, 10.1016/j.jcrysgro.2004.07.015
Ma, 1999, Worst-case performance analysis of optimal batch control trajectories, AIChE J, 45, 1469, 10.1002/aic.690450710
Ma, 2006, Multi-dimensional population balance modelling incorporated with real-time crystal shape measurement via in-process imaging
Mazzotti, 2006, The kinetics of L-glutamic acid precipitation: Characterisation and modelling
McKenzie, 2006, Can pharmaceutical process development become high tech?, AIChE J, 52, 3990, 10.1002/aic.11022
Mukuta, 2005, Influence of impurities on the solution-mediated phase transformation of an active pharmaceutical ingredient, Crystal Growth & Design, 5, 1429, 10.1021/cg049646j
Muller, 2006, Process development strategy to ascertain reproducible API polymorph manufacture, Crystal Growth & Design, 6, 946, 10.1021/cg050508j
Mullin, 2001
Mullin, 1971, Programmed cooling of batch crystallisers, Chem Eng Sci, 26, 369, 10.1016/0009-2509(71)83012-9
Murphy, 2002, Solution-mediated phase transformation of anhydrous to dihydrate carbamazepine and the effect of lattice disorder, International Journal of Pharmaceutics, 246, 121, 10.1016/S0378-5173(02)00358-7
O’Brien, 2004, Use of in situ FT-Raman spectroscopy to study the kinetics of the transformation of carbamazepine polymorphs, Journal of Pharmaceutical and Biomedical Analysis, 36, 335, 10.1016/j.jpba.2004.06.024
O'Sullivan, 2005, Application of in situ FBRM and ATR-FTIR to the monitoring of the polymorphic transformation of D-mannitol, Organic Process Research & Development, 9, 884, 10.1021/op0500887
Ono, 2004, Process modelling of the polymorphic transformation of L-glutamic acid, Crystal Growth & Design, 4, 1161, 10.1021/cg0497694
Ono, 2004, Quantitative measurement of the polymorphic transformation of L-glutamic acid using in-situ Raman spectroscopy, Crystal Growth & Design, 4, 465, 10.1021/cg0342516
Patience, 2001, Particle-shape monitoring and control in crystallization processes, AIChE J, 47, 2125, 10.1002/aic.690470922
Patience, 2004, Optimal operation of a seeded pharmaceutical crystallization with growth-dependent dispersion, Organic Process Research & Development, 8, 609, 10.1021/op0340917
Poornachary, 2007, Molecular speciation controlling stereoselectivity of additives: Impact on the habit modification in alpha-glycine crystals, Crystal Growth & Design, 7, 254, 10.1021/cg060273r
Qu, 2006, Solvent-mediated phase transformation kinetics of an anhydrate/ hydrate system, Crystal Growth & Design, 6, 2053, 10.1021/cg0600593
Raj, 1999, 2-D particle shape averaging and comparison using Fourier descriptors, Powder Technol, 104, 180, 10.1016/S0032-5910(99)00046-7
Rawlings, 1993, Model identification and control of solution crystallization processes—a review, Ind Eng Chem Res, 32, 1275, 10.1021/ie00019a002
Richmond, 1998, The relationship between particle aggregation and rheology in mixed silica-titania suspensions, Chemical Engineering Journal, 71, 67, 10.1016/S1385-8947(98)00105-3
Roelands, 2006, Antisolvent crystallization of the polymorphs of L-histidine as a function of supersaturation ratio and of solvent composition, Crystal Growth & Design, 6, 955, 10.1021/cg050529d
Saranteas, 2005, Process design and scale-up elements for solvent mediated polymorphic controlled tecastemizole crystallization, Organic Process Research & Development, 9, 911, 10.1021/op050101n
Sarkar, 2006, Multi-objective optimisation of seeded batch crystallization processes, Chem Eng Sci, 61, 5282, 10.1016/j.ces.2006.03.055
Schöll, 2006, In situ monitoring and modelling of the solvent-mediated polymorphic transformation of L-glutamic acid, Crystal Growth & Design, 6, 881, 10.1021/cg0503402
Scott, 2005, In-line analysis of impurity effects on crystallization, Organic Process Research & Development, 9, 890, 10.1021/op050081p
Skrdla, 2001, A simple quantitative FT-IR approach for the study of a polymorphic transformation under crystallization slurry conditions, Journal of Pharmaceutical and Biomedical Analysis, 25, 731, 10.1016/S0731-7085(01)00343-0
Starbuck, 2002, Process optimisation of a complex pharmaceutical polymorphic system via in situ Raman spectroscopy, Crystal Growth & Design, 2, 515, 10.1021/cg025559k
Tadayyon, 2000, Control of fines suspension density in the fines loop of a continuous KCl crystalliser using transmittance measurement and an FBRM (R) probe, Canadian Journal of Chemical Engineering, 78, 663, 10.1002/cjce.5450780408
Tavare, 1995
Threlfall, 2003, Structural and thermodynamic explanations of Ostwald's rule, Organic Process Research & Development, 7, 1017, 10.1021/op030026l
Tian, 2006, Characterizing the conversion kinetics of carba-mazepine polymorphs to the dihydrate in aqueous suspension using Raman spectroscopy, Journal of Pharmaceutical and Biomedical Analysis, 40, 271, 10.1016/j.jpba.2005.07.030
Togkalidou, 2002, Solution concentration prediction for pharmaceutical crystallization processes using robust chemometrics and ATR FTIR spectroscopy, Organic Process Research & Development, 6, 317, 10.1021/op015516x
Togkalidou, 2004, Parameter estimation and optimisation of a loosely bound aggregating pharmaceutical crystallization using in situ infrared and laser backscattering measurements, Ind Eng Chem Res, 43, 6168, 10.1021/ie0340847
Wang, 2000, An investigation of solvent mediated polymorphic transformation of progesterone using in situ Raman spectroscopy, Organic Process Research & Development, 4, 391, 10.1021/op000210w
Ward, 2006, Choosing an operating policy for seeded batch crystallization, AIChE J, 52, 2046, 10.1002/aic.10808
Weissbuch, 2003, Toward stereochemical control, monitoring, and understanding of crystal nucleation, Crystal Growth & Design, 3, 125, 10.1021/cg0200560
Wey, 2002, Batch crystallization, 245
Woo, 2006, Simulation of mixing effects in antisolvent crystallization using a coupled CFD-PDF-PBE approach, Crystal Growth & Design, 6, 1291, 10.1021/cg0503090
Worlitschek, 2002, On-line monitoring of batch cooling crystallization, Chem Eng Trans, 1, 1317
Worlitschek, 2004, Model-based optimisation of particle size distribution in batch-cooling crystallization of paracetamol, Crystal Growth & Design, 4, 891, 10.1021/cg034179b
Yu, 2004, Applications of process analytical technology to crystallization processes, Advanced Drug Delivery Reviews, 56, 349, 10.1016/j.addr.2003.10.012
Yu, 2005, Effects of operating conditions on agglomeration and habit of paracetamol crystals in anti-solvent crystallization, Journal of Crystal Growth, 279, 477, 10.1016/j.jcrysgro.2005.02.050
Yu, 2006, Application of attenuated total reflectance-Fourier transform infrared (ATR-FTIR) technique in the monitoring and control of anti-solvent crystallization, Ind Eng Chem Res, 45, 438, 10.1021/ie050660i
Yu, 2006, Seeding and constant-supersaturation control by ATR-FTIR in anti-solvent crystallization, Organic Process Research & Development, 10, 717, 10.1021/op060058j