Re-cycling of construction and demolition waste and steel slag: characterization of the durability

European Commission (2001) Competitiveness of the construction industry. A report drawn up by the Working Group for Sustainable Construction with participants from the European Commission, Member States and Industry. European Commission. https://www.etn-presco.net/library/SustConstEC-TaskGroup.pdf/. Accessed 11 Oct 2018 Generation of waste by waste category, hazardousness and NACE Rev 2 activity. https://ec.europa.eu/eurostat/en/web/products-datasets/-/ENV_WASGEN/. Accessed 17 Dec 2018 Directive 2008/98/EC (2008) Directive, 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste. Official Journal of the European Union. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32008L0098/. Accessed 11 Oct 2018 Hoang N, Ishigaki T, Kubota R, Yamada M, Kawamoto K (2020) A review of construction and demolition waste management in Southeast Asia. J Mater Cycles Waste Manag 22:315–325. https://doi.org/10.1007/s10163-019-00914-5 Euroslag (2016) Statistics 2016. The European Slag Association. https://www.euroslag.com/products/statistics/statistics-2016/. Accessed 18 Sep 2018 Umar UA, Shafiq N, Malakahmad A (2017) A review on adoption of novel techniques in construction waste management and policy. J Mater Cycles Waste Manag 19:1361–1373. https://doi.org/10.1007/s10163-016-0534-8 COURAGE (1999) Construction with unbound road aggregates in Europe. In: Final report. European Commission, 4th framework programme (1994–1998). https://trimis.ec.europa.eu/sites/default/files/project/documents/couragefrep.pdf/. Accessed 11 Oct 2018 ALTMAT (2001) Alternative materials in road construction. In: Final report (D7). Project founded by the European Commission under the transport RTD programme of the 4th framework programme SAMARIS (2006) Sustainable and advanced materials for road infrastructure. In: Final summary report (SAM-D32). Competitive and sustainable growth (GROWTH) programme. 5th framework programme for research and technological development of the European Union. https://trimis.ec.europa.eu/sites/default/files/project/documents/20100310_134040_3529_Samaris_Final_Summary_Report.pdf/. Accessed 12 Dec 2018 Gomes Correia A, Roque AJ, Reis Ferreira SM, Fortunato E (2012) Case study to promote the use of industrial by products: the relevance of performance tests. JAI 9:1–18. https://doi.org/10.1520/JAI103705 Neves J, Freire AC, Roque AJ, Martins I, Antunes ML, Faria G (2013) Utilization of recycled materials in unbound granular layers validated by experimental test sections. In: 9th international conference on the bearing capacity of roads, railways and airfields, Trondheim, Norway Poon CS, Chan D (2006) Feasible use of recycled concrete aggregates and crushed clay brick as unbound road sub-base. Constr Build Mater 20:578–585. https://doi.org/10.1016/j.conbuildmat.2005.01.045 Blankenagel B, Guthrie W (2006) Laboratory characterization of recycled concrete for use as pavement base material. Transp Res Rec 1952:21–27. https://doi.org/10.3141/1952-03 Vegas I, Ibañez JA, San José JT, Urzelai A (2008) Construction demolition wastes, Waelz slag and MSWI bottom ash: a comparative technical analysis as material for road construction. Waste Manag 28:565–574. https://doi.org/10.1016/j.wasman.2007.01.016 Jiménez JR, Agrela F, Ayuso J, López M (2010) A comparative study of recycled aggregates from concrete and mixed debris as material for unbound road sub-base. Mater Construct 61:289–302. https://doi.org/10.3989/mc.2010.54009(in Spanish) Gabr AR, Cameron DA (2012) Properties of recycled concrete aggregate for unbound pavement construction. J Mater Civ Eng 24:754–764. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000447 Arulrajah A, Piratheepan J, Disfani MM, Bo MW (2012) Geotechnical and geoenvironmental properties of recycled construction and demolition materials in pavement subbase applications. J Mater Civ Eng 25:1077–1088. https://doi.org/10.1061/(asce)mt.1943-5533.0000652 Rahardjo H, Satyanaga A, Leong EC, Wang JY (2013) Unsaturated properties of recycled concrete aggregate and reclaimed asphalt pavement. Eng Geol 161:44–54. https://doi.org/10.1016/j.enggeo.2013.04.008 Saca N, Dimache A, Radu LR, Iancu I (2017) Leaching behavior of some demolition wastes. J Mater Cycles Waste Manag 19:623–630. https://doi.org/10.1007/s10163-015-0459-7 Motz H, Geiseler J (2001) Products of steel slags an opportunity to save natural resources. Waste Manag 21:285–293. https://doi.org/10.1016/S0956-053X(00)00102-1 Maslehuddin M, Sharif AM, Shameem M, Ibrahim M, Barry MS (2003) Comparison of properties of steel slag and crushed limestone aggregate concretes. Constr Build Mater 17:105–112. https://doi.org/10.1016/S0950-0618(02)00095-8 Rojas MF, Sánchez de Rojas MI (2004) Chemical assessment of the electric arc furnace slag as construction material: Expansive compounds. Cem Concr Res 34:1881–1888. https://doi.org/10.1016/j.cemconres.2004.01.029 Shi C (2004) Steel slag—its production, processing, characteristics, and cementitious properties. J Mater Civ Eng 16:230–236. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:3(230) Pasetto M, Baldo N (2010) Experimental evaluation of high performance base course and road base asphalt concrete with electric arc furnace steel slags. J Hazard Mater 181:938–948. https://doi.org/10.1016/j.jhazmat.2010.05.104 Havanagi V, Sinha A, Arora VK, Mathur S (2012) Waste materials for construction of road embankment and pavement layers. Int J Environ Eng Res 1:51–59 Yildirim IZ, Prezzi M (2017) Experimental evaluation of EAF ladle steel slag as a geo-fill material: mineralogical, physical & mechanical properties. Constr Build Mater 154:23–33. https://doi.org/10.1016/j.conbuildmat.2017.07.149 Dhoble YN, Ahmed S (2018) Review on the innovative uses of steel slag for waste minimization. J Mater Cycles Waste Manag 20:1373–1382. https://doi.org/10.1007/s10163-018-0711-z Conde MC, Dinis da Gama C, Lopes MG (2004) Correlation between mechanical behaviour of aggregates and original rocks. In: 9th Portuguese geotechnical congress, Aveiro, Portugal, vol 1, pp 141–150 (in Portuguese) Singh TN, Verma AK, Singh V, Sahu A (2005) Slake durability study of shaly rock and its predictions. Environ Geol 47:246–253. https://doi.org/10.1007/s00254-004-1150-9 Kolay E, Kayabali K (2006) Investigation of the effect of aggregate shape and surface roughness on the slake durability index using the fractal dimension approach. Eng Geol 86:271–284. https://doi.org/10.1016/j.enggeo.2006.05.007 Sharma PK, Singh TN (2008) A correlation between P-wave velocity, impact strength index, slake durability index and uniaxial compressive strength. Bull Eng Geol Environ 67:17–22. https://doi.org/10.1007/s10064-007-0109-y Yagiz S (2011) Correlation between slake durability and rock properties for some carbonate rocks. Bull Eng Geol Environ 70:377–383. https://doi.org/10.1007/s10064-010-0317-8 Heidari M, Rafiei B, Mohebbi Y, Torabi-Kaveh M (2015) Assessing the behavior of clay-bearing rocks using static and dynamic slaking indices. Geotech Geol Eng 33:1017–1030. https://doi.org/10.1007/s10706-015-9884-6 Taghipour M, Nikudel MR, Farhadian MB (2016) Engineering properties and durability of limestones used in Persepolis complex, Iran, against acid solutions. Bull Eng Geol Environ 75:967–978. https://doi.org/10.1007/s10064-015-0821-y Chandra R (1970) Slake durability test for rocks. MSc thesis, Imperial Collage, London Franklin JA, Chandra R (1972) The slake-durability test. Int J Rock Mech Min Sci 9:325–328. https://doi.org/10.1016/0148-9062(72)90001-0 ISRM (1977) Suggested method for determination of the slake-durability index—Part 2. Commission on testing methods. Pergamon Press, London ASTM D4644-08 (2012) Standard test method for slake durability of shales and similar weak rocks. In: Annual book of ASTM standards, 04.08, West Conshohocken Kayabali K, Beyaz T, Kolay E (2006) The effect of the pH of the testing liquid on the slake durability of gypsum. Bull Eng Geol Environ 65:65–71. https://doi.org/10.1007/s10064-005-0027-9 Gupta V, Ahmed I (2007) The effect of pH of water and mineralogical properties on the slake durability (degradability) of different rocks from the Lesser Himalaya, India. Eng Geol 95:79–87. https://doi.org/10.1016/j.enggeo.2007.09.004 Fereidooni D, Khajevand R (2018) Utilization of the accelerated weathering test method for evaluating the durability of sedimentary rocks. Bull Eng Geol Environ 57:1–20. https://doi.org/10.1007/s10064-018-1267-9 Rodrigues G, Roque AJ, Silva PF (2012) Evaluating the durability of two recycled aggregates to be used in basal drainage layer of landfills. In: 8th WASCON conference, Gothenburg Roque AJ, Castro F, Gomes Correia A, Silva S, Cavalheiro A (2010) Laboratory and field leaching tests for predicting the environmental impact of Portuguese steel slag. In: 6th international congress on environmental geotechnics, ISSMGE, New Delhi NP En 932–3 (2010) Tests for general properties of aggregates—Part 3: Procedure and terminology for simplified petrographic description. Portuguese Institute for Quality, Caparica (in Portuguese) ASTM C856-11 (2012) Standard practice for petrographic examination of hardened concrete. In: Annual book of ASTM standards, 04.02, West Conshohocken EN 12407 (2007) Natural stone test methods—petrographic examination. Comité Européen de Normalisation, Brussels LERO-PE01 (1993) Tests to determine water absorption, density, porosity and water absorption capacity. LNEC, Lisbon (in Portuguese) LNEC E 227 (2008) Characterization of recycled aggregates according to the European Standard EN 933–11. LNEC Specification, Lisbon (in Portuguese) Rao A, Jha KN, Misra S (2007) Use of aggregates from recycled construction and demolition waste in concrete. Resour Conserv Recycl 50:71–81. https://doi.org/10.1016/j.resconrec.2006.05.010 Martín-Morales M, Zamorano M, Ruiz-Moyano A, Valverde-Espinosa I (2011) Characterization of recycled aggregates construction and demolition waste for concrete production following the Spanish Structural Concrete Code EHE-08. Constr Build Mater 25:742–748. https://doi.org/10.1016/j.conbuildmat.2010.07.012 Tam VWY, Wang K, Tam CM (2008) Assessing relationships among properties of demolished concrete, recycled aggregate and recycled aggregate concrete using regression analysis. J Hazard Mater 152:703–714. https://doi.org/10.1016/j.jhazmat.2007.07.061 Ferreira SMR (2010) Environmental and mechanical behaviour of aggregates—application to national electric arc furnace steel slags. PhD thesis, Engineering School of University of Minho, Guimarães (in Portuguese) NP 581 (1969) Aggregates for mortars and concretes. Determination of densities and water absorption of gravels. Portuguese Institute for Quality, Caparica (in Portuguese) Wu S, Xue Y, Ye Q, Chen Y (2007) Utilization of steel slag as aggregates for stone mastic asphalt (SMA) mixtures. Build Environ 42:2580–2585. https://doi.org/10.1016/j.buildenv.2006.06.008 De Lima LA (1999) Concrete with electric furnace slag as aggregates: properties, durability and environmental behavior. PhD thesis, Higher Technical School of Civil Engineers, Channels and Ports, Polytechnic University of Catalonia, Barcelona (in Spanish) Rodrigues GM (2012) ISAC and CCCDW recycling in the drainage layer of landfills—evaluation of their durability. MSc thesis, NOVA University of Lisbon, Caparica (in Portuguese) Gupta AS, Rao K (2000) Weathering effects on the strength and deformational behaviour of crystalline rocks under uniaxial compression state. Eng Geol 56:257–274. https://doi.org/10.1016/S0013-7952(99)00090-3 Moon V, Jayawardane J (2004) Geomechanical and geochemical changes during early stages of weathering of Karamu Basalt, New Zealand. Eng Geol 74:57–72. https://doi.org/10.1016/j.enggeo.2004.02.002 Tuǧrul A (2004) The effect of weathering on pore geometry and compressive strength of selected rock types from Turkey. Eng Geol 75:215–227. https://doi.org/10.1016/j.enggeo.2004.05.008 Gamble JC (1971) Durability-plasticity classification of shales and other argillaceous rock. PhD thesis, University of Illinois, Chicago European Commission (2016) EU Construction & Demolition Waste Management Protocol. European Commission. https://ec.europa.eu/growth/content/eu-construction-and-demolition-waste-protocol-0_en. Accessed 9 Apr 2020 Freire AC, Neves J, Roque AJ, Martins IM, Antunes ML (2019) Feasibility study of milled and crushed reclaimed asphalt pavement for application in unbound granular layers. Road Mater Pavement Des. https://doi.org/10.1080/14680629.2019.1701539 LNEC E 483 (2016) Guide for the use of recycled aggregates from reclaimed asphalt for unbound road pavement layers. LNEC Specification, Lisbon (in Portuguese) LNEC E 484 (2016) Guide for the use of materials resulting from construction and demolition waste in rural and forest roads. LNEC Specification, Lisbon (in Portuguese) LNEC E 485 (2016) Guide for the use of materials resulting from construction and demolition waste in backfill of trenches. LNEC Specification, Lisbon (in Portuguese) IP (2014) Technical specifications—14.03: paving: materials’ characteristics. Infraestruturas de Portugal (IP), Almada (in Portuguese). https://www.infraestruturasdeportugal.pt/sites/default/files/cet/14_03_set_2014.pdf. Accessed 9 Apr 2020