Preparation and characterization of nanocomposite hydrogels based on polyacrylamide for enhanced oil recovery applications

Wiley - Tập 100 Số 3 - Trang 2096-2103 - 2006
Reihaneh Zolfaghari1, Ali Asghar Katbab1, Javad Nabavizadeh1, Ramin Yousefzadeh Tabasi1, Majid Hossein Nejad1
1Polymer Engineering Department, Amirkabir University, Tehran, Iran

Tóm tắt

AbstractIn the present work, attempts have been made to prepare nanocomposite type of hydrogels (NC gels) by crosslinking the polyacrylamide/montmorillonite (Na‐MMT) clay aqueous solutions with chromium (III). The X‐ray diffraction patterns of the NC gels exhibited a significant increase in d001 spacing between the clay layers, indicating the formation of intercalated as well as exfoliated type of morphology. Exfoliation of the clay layers through out the gel network was found to be predominated, which evidences the high interaction between the polyacrylamide segments and montmorillonite layers. Gelation time as well as variation of viscoelastic parameters such as storage modulus (G′) of the gel network during gelation process at 75°C was studied and followed by rheomechanical spectroscopy (RMS). The NC gels prepared with lower crosslinker concentration showed higher strength and elastic modulus compared with the similar but unfilled polyacrylamide gel. This distinct characteristic of the NC gels yields a gel network structure with high resistance towards syneresis at high temperature in the presence of the oil reservoir formation water. The effects of the composition, such as clay content, crosslinker concentration, and also water salinity upon the gelation rate, gel strength as well as rate of syneresis have been investigated. To optimize the injectivity of the intercalated polyacrylamide solution before the onset of gelation with the gel strength of the final developed gel, sodium lactate was employed as retarder. This was found to be effective to balance these two characteristics of the NC gels, which are aimed to be used for water shut‐off and as profile modifier in enhanced oil recovery (EOR) process during water flooding process. The nanocomposite gels showed much more elasticity and extensibility at low crosslinker concentration compared with the similar but unfilled gel, which makes the NC gels suitable as an in‐depth profile modifier, and also as an oil displacing agent in the heterogeneous oil reservoir in chemical EOR. Effects of the clay content on the thermal stability of the gel network have also been investigated by thermogravimetric analysis (TGA). Scanning electron microscopy (SEM) has been performed upon the NC‐gel samples. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2096–2103, 2006

Từ khóa


Tài liệu tham khảo

10.1016/S0920-4105(00)00034-6

10.1007/s00396-003-0873-6

Moradi‐Araghi A., 1988, The Application of Gels in Enhanced Oil Recovery: Theory, Polymers and Crosslinker Systems; Water‐Soluble Polymers for Pertroleum Recovery, 299, 10.1007/978-1-4757-1985-7_21

Borling D., 1994, Pushing Out the Oil with Conformance Control, 6

Seright R.A Review of Gel Placement Concept PRRC 96‐21 1999.

Dalrymple E. D.;Eoff L.;Reddy B. R.;Botermans C. W.Presented at the Proceedings of the 11th Oilfield Chemistry Symposium Norway 2000.

Clampitt R. L.;Hesseot J. E.U.S. Pat. 3 785 437 (1972).

10.1016/0920-4105(94)90011-6

Al‐Sharji H. H.;Grattoni C. A.;Dawe R. A.;Zimmerman R. W.SPE paper 56738 1999.

10.1016/S0920-4105(97)00004-1

Theng B. K. G., 1974, Formation and Properties of Clay–Polymer Complexes

10.1021/ma021301r

10.1021/ma034366i

1985, Experiments on the applications of SAPC in water injection well for the adjustment of oil production cross‐section

1985, Experiments on the SAPC as water retention agent

10.1016/S1359-0286(02)00049-9

10.1002/(SICI)1097-4628(19980711)69:2<217::AID-APP2>3.0.CO;2-Q

10.1016/0040-6031(87)88040-1

Jain R.;McCool C. S.;Green D. W.;Willhite G. P.;Michnick M. J.SPE paper 89399 2004.

10.1016/S0920-4105(97)00004-1

Thông tin
Thông tin xuất bản

Wiley

Tập 100 Số 3

2096-2103

Thông tin tác giả