Prehistoric iron production technologies in the Upper Thai-Malay Peninsula: metallography and slag inclusion analyses of iron artefacts from Khao Sam Kaeo and Phu Khao Thong
Tóm tắt
This article presents a preliminary attempt to characterise Upper Thai-Malay Peninsula prehistoric iron technologies based on assemblages from two recently excavated coastal sites: Khao Sam Kaeo and Phu Khao Thong. These are the earliest known sites involved in the early trans-Asian exchange that connected the eastern Indian Ocean to the South China Sea from the mid-first millennium bc. It is from this period that iron assemblages start appearing at both continental and insular Southeast Asian sites. Three models have been offered confronting an indigenous vs. Chinese or South Asian impetus for the introduction of iron metallurgy in Southeast Asia. These models are discussed in the light of the metallographic and compositional analyses of iron and slag assemblages from these two sites using optical microscopy, scanning electron microscopy with energy dispersive spectrometry, energy dispersive X-ray fluorescence and slag inclusion analysis techniques, together with other production materials from these and other contemporaneous Southeast Asian sites.
Tài liệu tham khảo
Bachmann H-G (1982) The identification of slags from archaeological sites. Occasional Publication No. 6. Institute of Archaeology, London
Bellina B (2001) Témoignages archéologiques d’échanges entre l’Inde et l’Asie du Sud-est. Morphologie, morphométrie et techniques de fabrication des perles en agate et en cornaline (VI siècle avant notre ère-VI siècle de notre ère). Thèse de doctorat non publiée, Université Paris III, Paris
Bellina B (2003) Beads, social change and interaction between India and South-east Asia. Antiquity 77:285–97
Bellina B. (2007) Cultural Exchange between India and Southeast Asia: production of hard stone ornaments (VI c. BC-VI c. ad). Editions de la Maison des sciences de l’homme, Editions Epistemes, Paris
Bellina B (2008) Dossier—the archaeology of trans-Asiatic exchange: technological and settlement evidence from Khao Sam Kaeo, Peninsula Thailand. Bulletin de l'École française d'Extrême-Orient 93:249–390
Bellina B, Glover I (2004) The Archaeology of early contact with India and the Mediterranean world, from the fourth century bc to the fourth century ad. In: Glover I, Belwood P (eds) South-East Asia: from Prehistory to History. Routledge/Curzon, London, pp 66–88
Bellina B, Silapanth P (2008) Weaving cultural identities on trans-Asiatic networks: Upper Thai-Malay peninsula—an early socio-political landscape. Bulletin de l'Ecole Française d'Extrême-Orient 93:257–293
Bellina B Epinal G Favereau A (2012) Caractérisation préliminaire des poteries marqueurs d’échanges en Mer de Chine Méridionale à la fin de la préhistoire. Archipel, 84
Bellwood P (2007) Prehistory of the Indo-Malaysian Archipelago. University of Hawaii Press, Honolulu
Bennett AT (1982) Iron artefacts from Thailand. B.Sc. thesis, University of London
Biggs L (2009) Iron technology in peninsular Thailand: evidence from 2nd century bc sites at Khaeo Sam Keao and Phu Khao Thong. M.Sc. dissertation, Institute of Archaeology, University College, London
Bhardwa, HC (2000) Metallurgy in Indian Archaeology. Varanasi, Tara Book Agency.
Blakelock E, Martinón-Torres M, Veldhuijzen H, Young T (2009) Slag inclusions in iron objects and the quest for provenance: an experiment and a case study. J Archaeol Sci 36:1745–1757
Bronson B (1999) The transition to iron in ancient China. In: Pigott VC (ed) The archaeometallurgy of the Asian old world. University Museum, University of Pennsylvania, Philadelphia, pp. 177–193
Chaisuwan B, Naiyawat R (2009) Thung Tuk: a settlement linking together the Maritime Silk Route. Trio Creation, Thailand
Chakrabarti DK (1976) The beginning of iron in India. Antiquity 198:114–24
Chakrabarti DK (1992) The early use of iron in India. Oxford University Press, Delhi
Charlton MF, Blakelock E, Martinón-Torres M, Young T (2012) Investigating the production provenance of iron artifacts with multivariate methods. J Archaeol Sci 39:2280–2293
Chia S, Mokhtar NAM. (2011) Evidence of Iron Production at Sungai Batu, Kedah. In: Chi S, Andaya B W. (eds.) Bujang Valley and Early Civilisations in Southeast Asia. Kuala Lumpur: Department of National Heritage, Ministry of Information, Communications and Culture
Craddock PT, Wayman ML, Wang H, Michaelson C (2003) Chinese cast iron through twenty-five hundred years. In: Jett P et al. (eds) Proceedings of the 1st Forbes symposium on scientific research in the field of Asian art at the Freer Gallery of Art, London
Desaulty AM, Mariet C, Dillmann P, Joron JL, Fluzin P (2008) The study of provenance of iron objects by ICP-MS multi-elemental analysis. Spectrochimica Acta B 63:1253–1262
Dikshit KN (1986) The antiquity of iron in India. In: Chandra L, Jain D (eds) Dimensions of Indian Art. Delhi, pp. 109–119
Dillman P, L’Heretier M (2007) Slag inclusion analyses for studying ferrous alloys employed in French medieval buildings: supply of materials and diffusion of smelting processes. J Archaeol Sci 34:1810–1823
Dizon EZ (1990) Prehistoric iron-use and its technology in the Philippines. National Museum Papers 1:41–65
Dussubieux L, Lankton L, Bellina B, Chaisuwan B (2012). Early Glass Trade in South and Southeast Asia: New insights from two coastal sites, Phu Khao Thong in Thailand and Arikamedu in South India. In: Proceedings of the European Association of Archaeologist in Southeast Asia conference, Berlin, September 2010
Glover IC, Bellina B (2012) Ban Don Ta Phet and Khao Sam Kaeo: the Earliest Indian contact reassessed. In: Manguin PY, Mani (eds) Early interactions between South and Southeast Asia: reflections on cross-cultural exchange. ISEAS, Singapore
Han R (1996) The development of Chinese ancient iron blast furnace. In: Igaki K (ed) Proceedings of the forum for the fourth international conference on the beginnings of the use of metals and alloys. The Japan Institute of Metals, Senda, pp 151–174
Han R (1998) Iron and steel making and it’s (sic) features in Ancient China. Bulletin of the Metals Museum 30(2):23–37
Han R, Chen H (2009) The manufacture techniques and dates of iron objects found in several sites of China in recent years. Poster presentation at World of Iron conference, London
Han R, Duan HD (2009) An early iron-using centre in the ancient Jin state region (8th–3rd century bc). In: Mei J, Rehren Th (eds) Metallurgy and civilisation: Eurasia and beyond. Proceedings of the 6th International Conference on the Beginnings of the Use of Metals and Alloys (BUMA VI), pp. 99–106
Higham G, Higham C, Kijngam A (2011) Cutting a Gordian Knot: the Bronze Age of Southeast Asia: origins, timing and impact. Antiquity 85(328):583–598
Hognan LM, Rutnin S (1989) Metallurgical analysis of iron artefacts from Thailand. JHMS 23(2):99–107
Lankton JW, Dussubieux L, Gratuze B (2006) Glass from Khao Sam Kaeo: transferred technology for an early Southeast Asian exchange network. Bulletin de l’Ecole francaise d’Extreme-Orien 93:317–351
Leroy S (2010) Circulation au Moyen Age des materiaux ferreux issus des Pyrenees ariegeoises et de la Lombardie. Apport du couplage desanalyses en elements traces et multivariees. Ph.D. thesis, UniversityTechnologique de Belfort-Montbeliard.
Leroy S, Cohen SX, Verna C, Gratuze B, Téreygeol Fluzin P, Bertrand L, Dillmann P (2012) The medieval iron market in Ariège (France). Multidisciplinary analytical approach and multivariate analyses. J Archaeol Sci 39:1080–1093
McDonnell JG (1982) Tap slags and hearth bottoms, or, how to identify slags. Current Archaeology 86:81–83
McDonnell JG (1987) The study of early iron smithing residues. In: Scott BG, Cleere H (eds.) The crafts of the blacksmith. Comité pour la Sidérurgie Ancienne and Ulster Museum, Belfast, UISPP, pp. 47–52
McDonnell JG (1991) A model for the formation of smithing slags. Materialy Archeologiczne 26:23–26
Murillo-Barroso M, Pryce TO, Bellina B, Martinón-Torres M (2010) Khao Sam Kaeo—an archaeometallurgical crossroads for trans-asiatic technological traditions. Journal of Archaeological Science 37:1761–1772
Needham J (1974) Science and civilisation in China 2 (May). Cambridge University Press, Cambridge
Nitta E (1997) Iron-smelting and salt-making industries in Northeast Thailand. Bulletin Indo-Pacific Prehistory Ass 16:153–160
Pleiner R (2006) Iron in Archaeology: Early European Blacksmiths. Archeologický Ústav Avčr, Praha
Pryce TO, Bellina-Pryce B, Bennett A (2006) The development of metal technologies in the Upper Thai-Malay Peninsula: initial interpretation of the archaeometallurgical evidence from Khao Sam Kaeo. Bulletin de l’Ecole Francaise d’Extreme-Orient 93:295–315
Pryce TO, Pigott VC, Martinón-Torres M, Rehren T (2010) Prehistoric copper production and technological reproduction in the Khao Wong Prachan Valley of Central Thailand. Archaeological Anthro Sciences 2:237–264
Pryce TO, Brauns M, Chang N, Pernicka E, Pollard M, Ramsey C, Rehren T, Souksavatdy V, Sayavongkhamdy T (2011) Isotopic and technological variation in prehistoric primary Southeast Asian copper production. J Archaeol Sci 38:3309–3322
Rostoker W, Bronson B (1990) Pre-industrial iron: its technology and ethnology. Archeomaterials, Philadelphia
Samuels LE (1980) Optical microscopy of carbon steels. American Society of Metals, Ohio
Scott DA, Ma Q (2006) Metallographic examination of iron artefacts from Gansu Province, China. Historical Metallurgy 40(2):105–114
Serneels V, Perret S (2003) Quantification of smithing activities based on the investigation of slag and other materials. In: Archaeometallurgy in Europe. International Conference, Milan, Italy, 24–25–26 September 2003. Proceedings Vol. 1. Associazione Italiana di Metallurgia, Milan, pp. 469–478
Srinivasan S, Sinopoli C, Morrison K, Gopal R, Ranganathan S (2009) South Indian Iron Age iron and high carbon steel: with reference to Kadabakele and comparative insights from Mel-siruvalur. In: Mei J, Rehren Th (eds) Metallurgy and civilisation: Eurasia and beyond. Proceedings of the 6th International Conference on the Beginnings of the Use of Metals and Alloys (BUMA VI), pp. 116–121
Tripathi V, Upadhyay P (2009) Survival of traditional Indian ironworking. In: Mei J, and Rehren Th (eds).Metallurgy and Civilisation: Eurasia and Beyond. Proceedings of the 6th International Conference on the Beginnings of the Use of Metals and Alloys (BUMA VI), pp. 122–128
Unglik H (1991) Observations on the structures and formation of microscopic smithing residues from Bixby Blacksmith Shop at Barre Four Corners, Massachussetts, 1824–55. Historical Metallurgy 25(2):93–98
Veldhuijzen HA (2003) ‘Slag_Fun’ a new tool for archaeometallurgy: development of an analytical (P)ED-XRF method for iron-rich materials. Papers Institute of Archaeology 14:102–118
Wagner DB (1996) Iron and steel in Ancient China. E.J.Brill, Leiden
Wagner DB (2008) Ferrous Metallurgy. In: Joseph Needham Science and Civilisation in China. Part 11 of vol. 5. Chemistry and Chemical Technology. Cambridge University Press, Cambridge
Wayman ML, Michaelson C (2007) Early Chinese ferrous swords from the British Museum collections. In: La Niece S, Hook D, Craddock P (eds) Metals and mines: studies in archaeometallurgy. British Museum, London, pp. 226–232
Yasuyuki M (2009) Iron production in Han and Pre-Han periods in Sichuan Cheng Du Plain China. Poster Presentation at World of Iron Conference, London (February, 2009)