Prediction of Compressive Strength of Concretes Containing Silica Fume and Styrene-Butadiene Rubber (SBR) with a Mathematical Model
Tóm tắt
This paper deals with the interfacial effects of silica fume (SF) and styrene-butadiene rubber (SBR) on compressive strength of concrete. Analyzing the compressive strength results of 32 concrete mixes performed over two water–binder ratios (0.35, 0.45), four percentages replacement of SF (0, 5, 7.5, and 10 %) and four percentages of SBR (0, 5, 10, and 15 %) were investigated. The results of the experiments were showed that in 5 % of SBR, compressive strength rises slightly, but when the polymer/binder materials ratio increases, compressive strength of concrete decreases. A mathematical model based on Abrams’ law has been proposed for evaluation strength of SF–SBR concretes. The proposed model provides the opportunity to predict the compressive strength based on time of curing in water (t), and water, SF and SBR to binder materials ratios that they are shown with (w/b), (s) and (p).This understanding model might serve as useful guides for commixture concrete admixtures containing of SF and SBR. The accuracy of the proposed model is investigated. Good agreements between them are observed.
Tài liệu tham khảo
Barluenga, G., & Hernández-Olivares, F. (2004). SBR latex modified mortar rheology and mechanical behavior. Cement and Concrete Research,34, 527–535.
Beeldens, A., Van Gemert, D., Schorn, H., Ohama, Y., & Czarnecki, L. (2005). From microstructure to macrostructure: An integrated model of structure formation in polymer-modified concrete. Materials and Structures,38, 601–607.
Bhanja, S., & Sengupta, B. (2002). Investigations on the compressive strength of silica fume concrete using statistical methods. Cement and Concrete Research,32, 1391–1394.
Bhanja, S., & Sengupta, B. (2005). Influence of silica fume on the tensile strength of concrete. Cement and Concrete Research,35(2005), 743–747.
Bhanjaa, S., & Sengupta, B. (2003). Modified water–cement ratio law for silica fume concretes. Cement and Concrete Research,33, 447–450.
Bhikshma, V., Nitturkar, K., & Venkatesham, Y. (2009). Investigations on mechanical properties of high strength silica fume concrete. Asian Journal of Civil Engineering Building and Housing,10(3), 335–346.
Biswal, K. C., & Sadang, S. C. (2010). Effect of superplasticizer and silica fume on properties of concrete. In Proceedings of International Conference on Advances in Civil Engineering.
Chen, B., & Liu, J. (2007). Mechanical properties of polymer-modified concretes containing expanded polystyrene beads. Construction and Building Materials,21, 7–11.
Hwang, E. H., & Ko, Y. S. (2008). Comparison of mechanical and physical properties of SBR-polymer modified mortars using recycled waste materials. Journal of Industrial and Engineering Chemistry,14, 644–650.
Hwang, E. H., Ko, Y. S., & Jeon, J. K. (2008). Effect of polymer cement modifiers on mechanical and physical properties of polymer-modified mortar using recycled artificial marble waste fine aggregate. Journal of Industrial and Engineering Chemistry,14, 265–271.
Iqbal khan, M. (2009). Analytical model for strength prediction of HPC consisting of cementations. Architecture Civil Engineering Environmental, 1, 89–96.
Jun, L., Chang-Wei, X., Xiao-Van, Z., & Ling, W. (2003). Modification of high performances of polymer cement concrete. Journal of Wuban University of Technology-Mater,18(1), 61–64.
Katkhuda, H., Hanayneh, B., & Shatarat, N. (2009). Influence of silica fume on high strength of light weight concrete. World Academy of Science, Engineering and Technology,58, 781–788.
Popovics, S. (1998). Strength and related properties of concrete a quantitative approach. New York, NY: Wiley.
Rossignol, J. A. (2009). Interfacial interactions in concretes with silica fume and SBR latex. Construction and Building Materials,23(2009), 817–821.
Rozenbaum, O., Pellenq, R. J. M., & Van Damme, H. (2005). An experimental and mesocopic lattice simulation study of styrene-butadiene latex-cement composites properties. Materials and Structures,38, 467–478.
Wang, R., Wang, P. M., & Li, X. G. (2005). Physical and mechanical properties of styrene-butadiene rubber emulsion modified cement mortars. Cement and Concrete Research,35, 900–906.
Wu, K. R., Zhang, D., & Song, J. M. (2002). Properties of polymer-modified cement mortar using pre-enveloping method. Cement and Concrete Research,32, 425–429.
Zelic, J., Rusic, D., & Krstulovic, R. (2004). A mathematical model for prediction of compressive strength in cement–silica fume blends. Cement and Concrete Research,34, 2319–2328.