Photostabilization and cure kinetics of UV-curable optical resins containing photostabilizers
Tóm tắt
The photostabilization and cure kinetics of UV-curable, optical resins containing various formulations of photostabilizers were investigated to determine the system with the highest cure conversion and durability. Photo-DSC analysis revealed that increasing the concentration of a UV absorber (UVA) decreased both the cross-link density and the cure rate due to competition for the incident photons between the photoinitiator and the UVA, whereas including a hindered amine light stabilizer (HALS) hardly affected either the cure conversion or the cure rate due to its very low absorption of 365 nm. This result was confirmed by FTIR-ATR spectroscopy and UV-visible spectroscopy analyses. QUV ageing experiments showed that the cure conversion and durability were the highest for the UVA/ HALS formulation at a ratio of 1 : 2, which is due to their synergistic action.
Tài liệu tham khảo
P. K. T. Oldring,Chemistry & Technology of UV & EB Formulation for Coatings Inks & Paints, Vols. 1–4, SITA Technology, London, 1991.
(2) A. Reiser,Photoreactive Polymers, Wiley, New York, 1989.
C. G. Roffey,Photopolymerization of Surface Coatings, Wiley, New York, 1982.
L. Dellmann, S. Roth, C. Beuret, L. Paratte, G.-A. Racine, H. Lorenz, M. Despont, P. Renaud, P. Vettiger, and N. de Rooij,Microsyst. Technol.,4, 147 (1998).
V. Seidemann, S. Bütefisch, and S. Büttgenbach,Sens. Actuators A: Phys.,97–98, 457 (2002).
T. Kyu, S. Meng, H. Duran, K. Nanjundiah, and G. R. Yandek,Macromol. Res.,14, 155 (2006).
S. H. Nam, J. W. Kang, and J. J. Kim,Macromol. Res.,14, 114 (2006).
Y. Hirai, S. Harada, S. Isaka, M. Kobayashi, and Y. Tanaka,Jpn. J. Appl. Phys.,41, 4186 (2002).
D. I. Shin, S. H. Kim, H. S. Jeong, S. C. Lee, Y. S. Jin, J. E. Noh, H. R. Oh, K. U. Lee, D. H. Shin, and S. H. Song, Proceedings of SPIE-IS&T Electronic Imaging, 6068, 60680Q-1 (2006).
C. Decker and S. Biry,Prog. Org. Coat.,29, 81 (1996).
C. Decker and K. Zahouily,Polym. Degrad. Stab.,64, 293 (1999).
S. Zeren,Macromol. Symp.,187, 343 (2002).
J. D. Cho, S. G. Kim, and J.W. Hong,J. Appl. Polym. Sci.,99, 1446 (2006).
J. W. Hong and H. K. Kim,Macromol. Res.,14, 617 (2006).
S. C. Clark, C. E. Hoyle, S. Jonsson, F. Morel, and C. Decker,Polymer,40, 5063 (1999).
J. D. Cho, Y. B. Kim, H. T. Ju, and J. W. Hong,Macromol. Res.,13, 362 (2005).
J. D. Cho, H. K. Kim, Y. S. Kim, and J. W. Hong,Polym. Test.,22, 633 (2003).
J. D. Cho, H. T. Ju, and J. W. Hong,J. Polym. Sci.; Part A: Polym. Chem.,43, 658 (2005).
J. D. Cho, H. T. Ju, Y. S. Park, and J. W. Hong,Macromol. Mater. Eng.,291, 1155 (2006).