Pd catalyst supported on ZrO<sub>2</sub>‐Al<sub>2</sub>O<sub>3</sub> by double‐solvent method for methane oxidation under lean conditions

Canadian Journal of Chemical Engineering - Tập 95 Số 6 - Trang 1117-1123 - 2017
Guangxia Li1, Wei Hu1, Fujin Huang1, Jianjun Chen2, Maochu Gong2, Shandong Yuan3, Yaoqiang Chen2, Lin Zhong1
1College of Chemical Engineering Sichuan University Chengdu, 610064 P. R. China
2College of Chemistry, Sichuan University, Chengdu 610064, P.R. China
3Institute of New Energy and Low‐Carbon Technology Sichuan University Chengdu, 610064 P. R. China

Tóm tắt

AbstractThe Pd catalyst supported on the Zr0.5Al0.5O1.75 composite material was prepared by the conventional impregnation and double solvent impregnation method. The effects of preparation method on the catalytic properties of the Pd/Zr0.5Al0.5O1.75 catalyst for methane combustion have been investigated systematically. The measurement was evaluated in a multiple fixed‐bed continuous flow micro‐reactor by passing a gas mixture simulating the exhaust emissions from lean‐burn natural gas vehicles. The as‐prepared catalysts were characterized by CO chemical adsorption, transmission electron microscopy (TEM), hydrogen‐temperature programmed reduction (H2‐TPR),and X‐ray photoelectron spectroscopy (XPS) measurements. The results of TEM and CO chemisorption showed that the introduction of double solvent during the preparation of Pd/Zr0.5Al0.5O1.75 was beneficial for the dispersion of Pd nanoparticles and obtained superior resistance to the sintering of Pd on the surface of Zr0.5Al0.5O1.75. The H2‐TPR measurements demonstrated that the double solvent method increased the reducibility of the Pd catalyst. The XPS results further indicated that more active surface oxygen species also can be formed on the catalyst prepared via double solvent process. Thus, this catalyst exhibited better catalytic performance and hydrothermal aging resistance in the methane oxidation compared to its analogues with the same Pd content prepared by the conventional impregnation method.

Từ khóa


Tài liệu tham khảo

10.1016/S0926-3373(97)00024-6

10.1016/S0920-5861(98)00265-X

10.1016/S0926-3373(99)00017-X

10.1016/S0926-3373(02)00076-0

10.1016/j.apcatb.2008.03.013

10.1016/j.apcata.2013.03.002

10.1021/cs501146u

10.1016/j.fuproc.2013.01.013

10.1016/j.apcata.2014.03.032

10.1016/j.apcatb.2010.11.008

10.1016/j.apcatb.2008.02.007

10.1016/0021-9517(83)90054-4

10.1016/0926-860X(94)00252-5

10.1016/j.apsusc.2012.11.035

10.1016/j.apcatb.2014.12.016

10.1016/j.cattod.2007.06.015

10.1016/S1003-9953(11)60381-2

10.1016/j.molcata.2010.08.013

10.1016/S2095-4956(14)60172-8

10.1021/ja3043905

10.1016/j.micromeso.2008.08.053

10.1016/S1003-9953(11)60386-1

10.1016/j.catcom.2015.07.019

10.1016/j.molcata.2013.04.031

10.1016/j.molcata.2009.03.028

10.1016/j.apcatb.2015.09.054

10.1007/s11244-013-9970-z

10.1016/S1872-2067(15)60850-6

10.1016/j.apcatb.2004.03.009

10.1016/j.apcatb.2005.08.009

10.1016/j.jallcom.2010.01.031

10.1016/j.cattod.2009.02.029

10.1016/j.molcata.2015.08.001

10.1016/j.apsusc.2008.01.075

10.1023/B:CATL.0000027288.71826.be

10.1021/j100256a001

10.1016/0021-9517(94)90014-0

10.1016/j.apcatb.2010.11.025

10.1016/j.molcata.2011.05.011

10.1016/S1381-1169(01)00450-2

10.1016/j.apsusc.2005.07.043

10.1016/j.apcata.2005.08.002

10.1016/j.apcata.2008.10.044

10.1016/j.apcatb.2011.02.009

10.1021/jp805128u

10.1016/S1872-2067(14)60062-0

10.1021/jp306444h

10.1016/j.cej.2014.07.125

10.1016/j.jcat.2016.01.019

10.1016/S2095-4956(14)60172-8

10.1016/j.apcatb.2014.10.062

Long E. Y., 2010, Chin. J. Catal, 31, 313

10.3390/catal5020561

10.1016/j.apcatb.2012.02.025

10.1016/S0926-860X(02)00096-0

10.1016/0926-860X(94)00251-7

Thông tin
Thông tin xuất bản

Canadian Journal of Chemical Engineering

Tập 95 Số 6

1117-1123

Thông tin tác giả