PEDOT-Based Conducting Polymer Actuators
Tóm tắt
Từ khóa
Tài liệu tham khảo
Agrawal, 2019, Smart actuators for innovative biomedical applications: an interactive overview, Appl. Microbiol. Bioeng., 101, 10.1016/B978-0-12-815407-6.00007-1
Anquetil, 2004, Large strain actuation in polypyrrole actuators. Smart Structures and Materials 2004: Electroactive Polymer Actuators and Devices (EAPAD), Int. Soc. Opt. Photon., 5385, 380, 10.1117/12.540141
Armand, 2009, Ionic-liquid materials for the electrochemical challenges of the future, Nat. Mater., 8, 621, 10.1038/nmat2448
Asplund, 2010, Electroactive polymers for neural interfaces, Polym. Chem., 1, 1374, 10.1039/c0py00077a
Bar-Cohen, 2000, Electroactive polymers as artificial muscles: capabilities, potentials and challenges, Robotics, 188, 10.1061/40476(299)24
Bar-Cohen, 2002, Electroactive polymers: current capabilities and challenges. Smart Structures and Materials 2002: Electroactive Polymer Actuators and Devices (EAPAD), Int. Soc. Opt. Photon., 4695, 1, 10.1117/12.475159
Bar-Cohen, 2004, Electroactive Polymer (EAP) Actuators as Artificial Muscles: Reality, Potential, and Challenges
Bar-Cohen, 2019, Electroactive polymer (EAP) actuators-background review, Mech. Soft Mater., 1, 5, 10.1007/s42558-019-0005-1
Bay, 2001, Mechanism of actuation in conducting polymers: osmotic expansion, J. Phys. Chem. B, 105, 8492, 10.1021/jp003872w
Bund, 2004, Effect of the solvent and the anion on the doping/dedoping behavior of poly (3, 4-ethylenedioxythiophene) films studied with the electrochemical quartz microbalance, J. Phys. Chem. B, 108, 17845, 10.1021/jp0469721
Chen, 2012, Systematic study on chemical oxidative and solid-state polymerization of poly (3, 4-ethylenedithiathiophene), J. Polym. Sci. A Polym. Chem., 50, 1967, 10.1002/pola.25971
Chen, 1996, Electrochemically induced volume changes in poly (3, 4-ethylenedioxythiophene), Chem. Mater., 8, 2439, 10.1021/cm9600034
Cho, 2007, High ionic conductivity and mechanical strength of solid polymer electrolytes based on NBR/ionic liquid and its application to an electrochemical actuator, Sensors Actuators B Chem., 128, 70, 10.1016/j.snb.2007.05.032
Cho, 2007, An electroactive conducting polymer actuator based on NBR/RTIL solid polymer electrolyte, Smart Mater. Struct., 16, S237, 10.1088/0964-1726/16/2/S06
Cottinet, 2011, Nonlinear strain–electric field relationship of carbon nanotube buckypaper/Nafion actuators, Sensors Actuators A Phys., 170, 164, 10.1016/j.sna.2011.06.013
Dai, 2010, Mechanically strong conducting hydrogels with special double-network structure, Synth. Met., 160, 791, 10.1016/j.synthmet.2010.01.024
Doebbelin, 2010, Innovative materials and applications based on poly(3,4-ethylenedioxythiophene) and ionic liquids, J. Mater. Chem., 20, 7613, 10.1039/c0jm00114g
Farajollahi, , Characterization and dynamic charge dependent modeling of conducting polymer trilayer bending, Smart Mater. Struct., 25, 115044, 10.1088/0964-1726/25/11/115044
Farajollahi, , Self-contained tubular bending actuator driven by conducting polymers, Sens. Actuat. A, 249, 45, 10.1016/j.sna.2016.08.006
Feng, 2015, Low-potential electrosynthesis of a novel nitrogen analog of PEDOT in an ionic liquid and its optoelectronic properties, Electrochim. Acta, 160, 160, 10.1016/j.electacta.2015.02.054
Festin, 2013, Robust solid polymer electrolyte for conducting IPN actuators, Smart Mater. Struct, 22, 104005, 10.1088/0964-1726/22/10/104005
Festin, 2011, Conducting IPN actuators for biomimetic vision system. Electroactive Polymer Actuators and Devices (EAPAD), Int. Soc. Opt. Photon, 7976, 79760K, 10.1117/12.877634
Festin, 2014, Conducting IPN actuator/sensor for biomimetic vibrissa system. Electroactive Polymer Actuators and Devices (EAPAD), Int. Soc. Opt. Photon., 9056, 90562A, 10.1117/12.2047644
Gaihre, 2013, Comparative displacement study of bilayer actuators comprising of conducting polymers, fabricated from polypyrrole, poly(3,4-ethylenedioxythiophene) or poly(3,4-propylenedioxythiophene), Sensors Actuators A Phys., 193, 48, 10.1016/j.sna.2012.12.007
Greco, 2013, Liquid single crystal elastomer/conducting polymer bilayer composite actuator: modelling and experiments, Soft Matter., 9, 11405, 10.1039/c3sm51153g
Gueye, 2016, Structure and dopant engineering in PEDOT thin films: practical tools for a dramatic conductivity enhancement, Chem. Mater., 28, 3462, 10.1021/acs.chemmater.6b01035
Ha, 2004, Towards a transparent, highly conductive Poly (3, 4-ethylenedioxythiophene), Adv. Funct. Mater., 14, 615, 10.1002/adfm.200305059
Hamedi, 2016, Electrically activated paper actuators, Adv. Funct. Mater., 26, 2446, 10.1002/adfm.201505123
Hara, 2004, Artificial muscles based on polypyrrole actuators with large strain and stress induced electrically, Polym. J., 36, 151, 10.1295/polymj.36.151
Huang, 2002, On the selection of shape memory alloys for actuators, Mater. Des., 23, 11, 10.1016/S0261-3069(01)00039-5
Ikushima, 2010, PEDOT/PS bending actuators for autofocus micro lens applications, Synth. Met., 160, 1877, 10.1016/j.synthmet.2010.07.003
Irvin, 2013, Dominant ion transport processes of ionic liquid electrolyte in poly(3,4-ethylenedioxythiophene), J. Poly. Sci. B Polym. Phys., 51, 337, 10.1002/polb.23229
Jager, 2000, Microfabricating conjugated polymer actuators, Science, 290, 1540, 10.1126/science.290.5496.1540
Jalili, 2011, One-step wet-spinning process of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) fibers and the origin of higher electrical conductivity, Adv. Funct. Mater., 21, 3363, 10.1002/adfm.201100785
Jayathilaka, 2019, Significance of nanomaterials in wearables: a review on wearable actuators and sensors, Adv. Mater., 31, e1805921, 10.1002/adma.201805921
Joo, 2000, Physical characterization of electrochemically and chemically synthesized polypyrroles, Macromolecules, 33, 5131, 10.1021/ma991418o
Kaneto, 2016, Research trends of soft actuators based on electroactive polymers and conducting polymers, J. Phys. Conf. Ser, 704, 012004, 10.1088/1742-6596/704/1/012004
Kaneto, 2012, How to improve electrochemomechanical strain in conducting polymers. Electroactive Polymer Actuators and Devices (EAPAD), Int. Soc. Opt. Photon., 8340, 83400K, 10.1117/12.917879
Khaldi, 2011, Conducting interpenetrating polymer network sized to fabricate microactuators, Appl. Phys. Lett., 98, 164101, 10.1063/1.3581893
Khaldi, 2012, Patterning process and actuation in open air of micro-beam actuator based on conducting IPNs,, Electroactive Polymer Actuators and Devices (EAPAD). International Society for Optics and Photonics, Vol. 8340, 10.1117/12.915086
Kiefer, 2007, Mixed-ion linear actuation of PPy and PEDOT in propylene carbonate-triflate electrolytes. Electroactive Polymer Actuators and Devices (EAPAD), Int. Soc. Opt. Photon., 6524, 65240U, 10.1117/12.715089
Kim, 2013, Electro-active hybrid actuators based on freeze-dried bacterial cellulose and PEDOT: PSS, Smart Mater. Struct, 22, 085026, 10.1088/0964-1726/22/8/085026
Klute, 1999, McKibben artificial muscles: pneumatic actuators with biomechanical intelligence,, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 221
Kongahage, 2019, Actuator materials: review on recent advances and future outlook for smart textiles, Fibers, 7, 21, 10.3390/fib7030021
Kotal, 2016, Sulfur and nitrogen co-doped graphene electrodes for high-performance ionic artificial muscles, Adv. Mater., 28, 1610, 10.1002/adma.201505243
Kruusamäe, 2015, Self-sensing ionic polymer actuators: a review, Actuators, 4, 17, 10.3390/act4010017
Lee, 2004, Multifunctional transducer using poly (vinylidene fluoride) active layerand highly conducting poly (3,4-ethylenedioxythiophene) electrode: actuator and generator, Appl. Phys. Lett., 85, 1841, 10.1063/1.1784890
Lee, 2003, Flexible and transparent organic film speaker by using highly conducting PEDOT/PSS as electrode, Synthetic metals, 139, 457, 10.1016/s0379-6779(03)00199-1
Li, 2014, Soft and flexible PEDOT/PSS films for applications to soft actuators, Smart Mater. Struct., 23, 074010, 10.1088/0964-1726/23/7/074010
Lim, 2017, Construction of a photothermal Venus flytrap from conductive polymer bimorphs, Npg Asia Mater., 9, e399, 10.1038/am.2017.101
Lin, 2017, Hybrid π-conjugated polymers from dibenzo pentacyclic centers: precursor design, electrosynthesis and electrochromics, Sci. China Chem., 60, 38, 10.1007/s11426-016-0298-2
Lu, 2013, Electrosynthesis of poly (3, 4-ethylenedithiathiophene) in an ionic liquid and its electrochemistry and electrochromic properties, Electrochim. Acta, 106, 201, 10.1016/j.electacta.2013.05.068
Lu, 2014, Highly stable hybrid selenophene-3, 4-ethylenedioxythiophene as electrically conducting and electrochromic polymers, Polym. Chem., 5, 4896, 10.1039/c4py00529e
Lund, 2018, Roll-to-roll dyed conducting silk yarns: a versatile material for E-textile devices, Adv. Mater. Technol., 3, 1800251, 10.1002/admt.201800251
Madden, 2001, Polypyrrole actuators: modeling and performance. Smart Structures and Materials 2001: Electroactive Polymer Actuators and Devices, Int. Soc. Opt. Photon., 4329, 72, 10.1117/12.432688
Madden, 2004, Artificial muscle technology: physical principles and naval prospects, IEEE J. Ocean. Eng, 29, 706, 10.1109/JOE.2004.833135
Mahadeva, 2009, Effect of polyelectrolyte nanocoating on the performance and durability of cellulose electro-active paper actuator, J. Nanosci. Nanotechnol., 9, 5757, 10.1166/jnn.2009.1241
Mashayekhi Mazar, 2019, Artificial muscles powered by glucose, Adv. Mater., 31, 1901677, 10.1002/adma.201901677
Maziz, 2017, Knitting and weaving artificial muscles, Sci. Adv., 3, e1600327, 10.1126/sciadv.1600327
Maziz, 2015, High speed electromechanical response of ionic microactuators. Electroactive Polymer Actuators and Devices (EAPAD), Int. Soc. Opt. Photon, 9430, 94300O, 10.1117/12.2085516
Maziz, 2016, Top-down approach for the direct synthesis, patterning, and operation of artificial micromuscles on flexible substrates, ACS Appl. Mater. Interfaces, 8, 1559, 10.1021/acsami.5b09577
Melling, 2019, Conjugated polymer actuators and devices: progress and opportunities, Adv. Mater, 31, 1808210, 10.1002/adma.201808210
Ming, , Thiadiazolo [3, 4-c] pyridine as an acceptor toward fast-switching green donor-acceptor-type electrochromic polymer with low bandgap, ACS Appl. Mater. Interfaces, 7, 11089, 10.1021/acsami.5b01188
Ming, , Chalcogenodiazolo [3, 4-c] pyridine based donor-acceptor-donor polymers for green and near-infrared electrochromics, Polym. Chem, 6, 8248, 10.1039/c5py01321f
Mirvakili, 2018, Artificial muscles: mechanisms, applications, and challenges, Adv. Mater., 30, 1704407, 10.1002/adma.201704407
Miura, 2014, Foldable textile electronic devices using all-organic conductive fibers, Adv. Eng. Mater., 16, 550, 10.1002/adem.201300461
Nguyen, , Nonlinear dynamic modeling of ultrathin conducting polymer actuators including inertial effects, Smart Mater. Struct., 27, 115032, 10.1088/1361-665X/aae456
Nguyen, 2017, Microfabricated PEDOT trilayer actuators: synthesis, characterization, and modeling. Electroactive Polymer Actuators and Devices (EAPAD), Int. Soc. Opt. Photon., 10163, 101631K, 10.1117/12.2260431
Nguyen, , Ultrathin electrochemically driven conducting polymer actuators: fabrication and electrochemomechanical characterization, Electrochim. Acta, 265, 670, 10.1016/j.electacta.2018.02.003
O'Halloran, 2008, A review on dielectric elastomer actuators, technology, applications, and challenges, J. Appl. Phys, 104, 071101, 10.1063/1.2981642
Okuzaki, 2013, Humido-sensitive conducting polymer films and applications to linear actuators, React. Funct. Polym., 73, 986, 10.1016/j.reactfunctpolym.2012.10.013
Okuzaki, , Electrically driven PEDOT/PSS actuators, Synth. Met., 159, 2233, 10.1016/j.synthmet.2009.07.054
Okuzaki, , Electromechanical properties of poly (3, 4-ethylenedioxythiophene)/poly (4-styrene sulfonate) films, J. Phys. Chem. B, 113, 11378, 10.1021/jp902845x
Otero, 2012, Biomimetic electrochemistry from conducting polymers. A review, Electrochim. Acta, 84, 112, 10.1016/j.electacta.2012.03.097
Panda, 2019, Electronic applications of conducting polymer nanocomposites,, Proceedings of the Third International Conference on Microelectronics, Computing and Communication Systems, 211, 10.1007/978-981-13-7091-5_20
Plesse, 2011, Polyethylene oxide-polytetrahydrofurane-PEDOT conducting interpenetrating polymer networks for high speed actuators, Smart Mater. Struct, 20, 124002, 10.1088/0964-1726/20/12/124002
Plesse, 2007, Poly(ethylene oxide)/polybutadiene based IPNs synthesis and characterization, Polymer, 48, 696, 10.1016/j.polymer.2006.11.053
Plesse, 2008, Conducting IPN fibers: a new design for linear actuation in open air, Adv. Sci. Technol., 61, 53, 10.4028/www.scientific.net/AST.61.53
Poldsalu, , Mechanical and electro-mechanical properties of EAP actuators with inkjet printed electrodes, Synth. Met., 246, 122, 10.1016/j.synthmet.2018.10.009
Poldsalu, , Thin ink-jet printed trilayer actuators composed of PEDOT:PSS on interpenetrating polymer networks, Sensors Actuators B Chem., 258, 1072, 10.1016/j.snb.2017.11.147
Poldsalu, 2017, Inkjet-printed hybrid conducting polymer-activated carbon aerogel linear actuators driven in an organic electrolyte, Sensors Actuators B Chem., 250, 44, 10.1016/j.snb.2017.04.138
Rasouli, 2018, The influence of electrodeposited conducting polymer electrode structure on the actuation performance of muscle-like ionic actuators, Sensors Actuators A Phys., 279, 204, 10.1016/j.sna.2018.05.041
Rinne, 2019, Encapsulation of ionic electromechanically active polymer actuators, Smart Mater. Struct., 28, 074002, 10.1088/1361-665X/ab18c0
Rohtlaid, 2019, Poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate)/polyethylene oxide electrodes with improved electrical and electrochemical properties for soft microactuators and microsensors, Adv. Electron. Mater., 5, 1800948, 10.1002/aelm.201800948
Romasanta, 2015, Increasing the performance of dielectric elastomer actuators: a review from the materials perspective, Prog. Polym. Sci., 51, 188, 10.1016/j.progpolymsci.2015.08.002
Schmidt, 2006, Piezoelectric actuators employing PVDF coated with flexible PEDOT-PSS polymer electrodes, IEEE Trans. Dielectr. Electr. Insul, 13, 1140, 10.1109/TDEI.2006.1714940
Shrestha, , Smart window based on electric unfolding of microwrinkled TiO2 nanometric films, ACS Photon., 5, 3255, 10.1021/acsphotonics.8b00486
Shrestha, , Transparent tunable acoustic absorber membrane using inkjet-printed PEDOT:PSS thin-film compliant electrodes, ACS Appl. Mater. Interfaces, 10, 39942, 10.1021/acsami.8b12368
Smela, 2003, Conjugated polymer actuators for biomedical applications, Adv. Mater., 15, 481, 10.1002/adma.200390113
Smits, 1958, Measurement of sheet resistivities with the four-point probe, Bell Syst. Tech. J., 37, 711, 10.1002/j.1538-7305.1958.tb03883.x
Taccola, 2013, Thin film free-standing PEDOT:PSS/SU8 bilayer microactuators, J. Micromech. Microeng., 23, 117004, 10.1088/0960-1317/23/11/117004
Taccola, 2015, Toward a new generation of electrically controllable hygromorphic soft actuators, Adv. Mater., 27, 1668, 10.1002/adma.201404772
Takalloo, 2019, Evaluating performance of wet unencapsulated PEDOT trilayer actuators operating in air and water, Multifunct. Mater., 2, 014003, 10.1088/2399-7532/ab0a9a
Takashima, 2005, Patternable bi-ionic actuator: an example of new functionality of actuation, folding and unfolding of electrochemical spring, Sensors Actuators B Chem., 110, 120, 10.1016/j.snb.2005.01.018
Temme, 2012, Combined chemical and electrochemical synthesis methods for metal-free polypyrrole actuators, Sensors Actuators B Chem., 411, 10.1016/j.snb.2012.01.075
Temmer, 2013, In search of better electroactive polymer actuator materials: PPy versus PEDOT versus PEDOT-PPy composites, Smart Mater. Struct., 22, 104006, 10.1088/0964-1726/22/10/104006
Terasawa, 2016, High-performance PEDOT:PSS/single-walled carbon nanotube/ionic liquid actuators combining electrostatic double-layer and faradaic capacitors, Langmuir, 32, 7210, 10.1021/acs.langmuir.6b01148
Vandesteeg, 2003, Synthesis and characterization of EDOT-based conducting polymer actuators. Smart Structures and Materials 2003: Electroactive Polymer Actuators and Devices (EAPAD), Int. Soc. Opt. Photon., 5051, 349, 10.1117/12.484418
Vidal, 2006, Conducting IPN actuators: from polymer chemistry to actuator with linear actuation, Synth. Met., 156, 1299, 10.1016/j.synthmet.2006.09.012
Vidal, 2004, Long-life air working conducting semi-IPN/ionic liquid based actuator, Synth. Met., 142, 287, 10.1016/j.synthmet.2003.10.005
Vidal, 2002, Actuators based on conducting poly (3, 4-ethylenedioxythiophene)/PEO semi-IPN. Smart Structures and Materials 2002: Electroactive Polymer Actuators and Devices (EAPAD), Int. Soc. Opt. Photon., 4695, 95, 10.1117/12.475153
Vidal, 2003, Feasibility of conducting semi-interpenetrating networks based on a poly (ethylene oxide) network and poly (3, 4-ethylenedioxythiophene) in actuator design, J. Appl. Polym. Sci., 90, 3569, 10.1002/app.13055
Wang, 2017, High energy conversion efficiency conducting polymer actuators based on PEDOT:PSS/MWCNTs composite electrode, RSC Adv, 7, 31264, 10.1039/C7RA05469F
Wang, 2014, Novel electroactive PVA-TOCN actuator that is extremely sensitive to low electrical inputs, Smart Mater. Struct, 23, 074006, 10.1088/0964-1726/23/7/074006
Wang, 2009, Research progress on a novel conductive polymer–poly(3,4-ethylenedioxythiophene) (PEDOT), J. Phys. Conf. Ser., 152, 012023, 10.1088/1742-6596/152/1/012023
Wübbenhorst, 2016, Electromechanically Active Polymers: A Concise Reference, 10.1007/978-3-319-31530-0
Yang, 2006, Polymer films on electrodes: investigation of ion transport at poly(3,4-ethylenedioxythiophene) films by scanning electrochemical microscopy, Langmuir, 22, 10338, 10.1021/la061167u
Zainudeen, 2008, PEDOT and PPy conducting polymer bilayer and trilayer actuators, Sensors Actuators B Chem., 134, 467, 10.1016/j.snb.2008.05.027
Zhou, 2016, High-ampacity conductive polymer microfibers as fast response wearable heaters and electromechanical actuators, J. Mater. Chem. C, 4, 1238, 10.1039/C5TC03380B