Optimum Proportion of Masonry Chip Aggregate for Internally Cured Concrete

Afroz, S., Rahman, F., Iffat, S., & Manzur, T. (2015). Sorptivity and strength characteristics of commonly used concrete mixes of Bangladesh. Proceedings of the International Conference on Recent Innovation in Civil Engineering for Sustainable Development (IICSD-2015) (pp. 39–44). Department of Civil Engineering, DUET, Gazipur.

ASTM C109/C109M–13. (2013). Standard test method for compressive strength of hydraulic cement mortars (Using 2-in. or [50-mm] Cube Specimens). West Conshohocken, PA: ASTM International.

ASTM C 496/C496M-11. (2011). Standard test method for splitting tensile strength of cylindrical concrete specimens. West Conshohocken, PA: ASTM International.

ASTM C1202–12. (2012). Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration. West Conshohocken, PA: ASTM International.

ASTM C128–12. (2012). Standard test method for density, relative density (specific gravity), and absorption of fine aggregate. West Conshohocken, PA: ASTM International.

ASTM C136–06. (2006). Standard test method for sieve analysis of fine and coarse aggregates. West Conshohocken, PA: ASTM International.

ASTM C1761/C1761M–12. (2012). Standard specification for lightweight aggregate for internal curing of concrete. West Conshohocken, PA: ASTM International.

ASTM C187 –11e1. (2011). Standard test method for normal consistency of hydraulic cement. West Conshohocken, PA: ASTM International.

ASTM C191 –13. (2013). Standard test methods for time of setting of hydraulic cement by Vicat Needle. West Conshohocken, PA: ASTM International.

ASTM C29–09. (2009). Standard test method for bulk density (“Unit Weight”) and voids in aggregate. West Conshohocken, PA: ASTM International.

ASTM C39–14a. (2005). Standard test method for compressive strength of cylindrical concrete specimens. West Conshohocken, PA: ASTM International.

ASTM C469–02. (2002). Standard test method for static modulus of elasticity and poisson’s ratio of concrete in compression. West Conshohocken, PA: ASTM International.

Bentz, D. P. (2000). CEMHYD3D: A Three-Dimensional Cement Hydration and Microstructure Development Modelling Package, Version 2.0. NIST Internal Report 6485, U. S. Department of Commerce.

Bentz, D. P., Lura, P., & Roberts, J. W. (2005). Mixture proportioning for internal curing. National Institute of Standards and Technology, Concrete International, 27(2), 35–40.

Bentz, D. P., & Weiss, W. J. (2010). Internal curing: A 2010 state-of-the-art review. NISTIR 7765, National Institute of Standards and Technology.

Bosunia, S. Z., & Chowdhury, J. R. (2001). Durability of concrete in coastal areas of Bangladesh. Journal of Civil Engineering, IEB, 29(1), 41–53.

BS EN 197-1-2000. (2000). Part 1: Composition, specifications and conformity criteria for common cements. London: British Standards Institution.

Chun, S., & Kim, K. (2015). Evaluation of internally cured concrete pavement using environmental responses and critical stress analysis. International Journal of Concrete Structures and Materials, 9(4), 463–473.

de Sensale, G. R., & Goncalves, A. F. (2014). Effects of fine LWA and SAP as internal water curing agents. International Journal of Concrete Structures and Materials, 8(3), 229–238.

Expanded Shale, Clay and Slate Institute (ESCSI). (2012). Internal curing, helping concrete realize its maximum potential. Publication #4362.1.

Geiker, M., Bentz, D. P., & Jensen, O. M. (2004). Mitigating autogenous shrinkage by internal curing, high-perfomlance structural lightweight concrete. In J. P. Ries & T. A. Holm (Eds.), SP-218 (pp. 143–154). Farmington Hills, MI: American Concrete Institute.

Geoffrey, N. M., Raphael, N. M., Walter, O. O., & Silvester, O. A. (2012). Properties of Pumice Lightweight Aggregate. Civil and Environmental Research, 2(10).

Grace, W. R., & Company. (2006). Understanding AASHTO T277 and ASTM C1202 rapid chloride permeability test. Technical Bulletin TB 0100 (Concrete).

Green, S. M. F., Brooke, N. J., McSaveney, L. J., & Ingham, J. M. (2011). Mixture design development and performance verification of structural lightweight pumice aggregate concrete. Journal of Materials in Civil Engineering, 23(8), 1211–1219.

Hossain, T. (2012). Pervious concrete using brick chips as coarse aggregate: An experimental study. Journal of Civil Engineering (IEB), 40(2), 125–137.

Iffat, S. (2014). Efficiency of internal curing in concrete using local materials with different curing conditions. M.Sc. in Civil Engineering (Structural) Thesis, Bangladesh University of Engineering and Technology, Dhaka.

Iffat, S., Emon, A. B., Manzur, T., & Ahmad, S. I. (2014). An experiment on durability test (RCPT) of concrete according to ASTM standard method using low-cost equipments. Advanced Materials Research, 974, 335–340.

Iffat, S., Manzur, T., & Noor, M. A. (2015). Suitability of using super absorbent polymer in concrete as internal curing material: Bangladesh context. Proceedings of UKIERI Concrete Congress, Concrete Research Driving Profit and Sustainability (pp. 1631–1643). Jalandhar.

Iffat, S., Manzur, T., & Noor, M. A. (2015). Effect of internal curing on modulus of elasticity of concrete. Proceedings of the International Conference on Recent Innovation in Civil Engineering for Sustainable Development (IICSD-2015) (pp. 33–38) Department of Civil Engineering, DUET, Gazipur.

Iffat, S., Manzur, T., & Noor, M. A. (2016). Durability of internally cured concrete using locally available low cost light weight aggregate. KSCE Journal of Civil Engineering. doi: 10.1007/s12205-016-0793-x .

Kim, H., & Bentz, D. P. (2008). Internal curing with crushed returned concrete aggregates for high performance concrete. NRMCA Concrete Technology Forum: Focus on Sustainable Development, May 20–22, 2008, Denver, CO.

Lura, P. (2003). Autogenous deformation and internal curing of concrete. Ph.D. Thesis, Delft University, Delft.

Lura, P., Jensen, O. M., & Breugel, K. V. (2003). Autogenous shrinkage in high-performance cement paste: An evaluation of basic mechanisms. Cement and Concrete Research, 33, 223–232.

Manzur, T., Iffat, S., & Noor, M. A. (2015). Efficiency of sodium poly-acrylate to improve durability of concrete under adverse curing condition. Advances in Materials Science and Engineering, Hindawi Publishing Corporation, Article ID: AMSE 685785.

Manzur, T., Iffat, S., & Noor, M. A. (2015b). Relation between properties of internally cured concrete and water cement ratio. International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 9, 30326.

Mather, B. (2004). Self-curing concrete, why not. Concrete International, 23(1), 46–47.

Obla, K., Kim, H., & Lobo, C. (2007). Crushed returned concrete as aggregates for new concrete. NRMCA Report, Project 05-13.

Ptefier, D. W., McDonald, D. B., & Krauss, P. D. (1994). The rapid chloride permeability test and its correlation to the 90 day chloride ponding test. PCI Journal, 39, 38–47.

Schlitter, J. (2010). Development of internally cured concrete for increased service life. Joint Transportation Research Program, FHWA/IN/JTRP-2010/10.

Zou, D., & Weiss, J. (2014). Early age cracking behavior of internally cured mortar restrained by dual rings with different thickness. Construction and Building Materials, 66, 146–153.

Zou, D., Zhang, H., Wang, Y., Zhu, J., & Guan, X. (2015). Internal curing of mortar with low water to cementitious materials ratio using a normal weight porous aggregate. Construction and Building Materials, 96, 209–216.