Optimization of single outsourcer–single subcontractor outsourcing relationship under reliability and maintenance constraints
Tóm tắt
In this paper, we focus on outsourcing activities optimization problem in single period setting. In some situations, capacity planning or outsourcing is a one-time event and can be modeled as a single period problem. The aim of this research is to balance the trade-off between two echelons of a supply chain consisting of a single outsourcer and a single subcontractor. Each part is composed of a failure-prone single machine that produces one product type to satisfy market requirements. The outsourcer’s manufacturing system is not able to satisfy the demand; in this case, outsourcing is allowed to recover the lack of capacity. We consider that the subcontractor can satisfy the demands of strategic clients and rent his machine for the outsourcer under a win–win partnership contract. We assume that the hazard failure rate depends on time and the adopted manufacture rate. When unforeseen failures occur, minimal repairs are implemented. Overhaul can be performed to reduce the degradation effects. Hence, we develop a mathematical model to define a profitability interval so that both parties of supply chain can be considered as winners. We seek to determine the contract parameters that suit both parties (duration, start and end dates, the production and outsourcing rates). Then, we develop an exact algorithm to solve the problem of single period optimization, which offers a better execution time through a series of test problems. Finally, we consider a sensitivity analysis based on outsourcing parameters (cost, periodicities, etc) to analyze their effects on partial costs and individual profit of each part, as well as the total profit generated by the system.
Tài liệu tham khảo
Abdel-Malek L, Kullpattaranirun T, Nanthavanij S (2005) A framework for comparing outsourcing strategies in multilayered supply chains. Int J Prod Econ 97(3):318–328
Adeyeri MK, Mpofu K (2017) Development of system decision support tools for behavioral trends monitoring of machinery maintenance in a competitive environment. J Ind Eng Int 13(2):249–264
Amelian S, Sajadi SM, Alinaghian M (2015) Optimal production and preventive maintenance rate in a failure-prone manufacturing system using discrete event simulation. Int J Ind Syst Eng 20(4):483–496
Arshinder K, Kanda A, Deshmukh SG (2011) A review on supply chain coordination: coordination mechanisms, managing uncertainty and research directions. In: Choi TM, Cheng TCE (eds) Supply chain coordination under uncertainty. Springer, Berlin, pp 39–82
Aydinliyim T, Vairaktarakis GL (2010) Coordination of outsourced operations to minimize weighted flow time and capacity booking costs. Manuf Serv Oper Manag 12(2):236–255
Cassady CR, Pohl EA, Murdock WP (2001) Selective maintenance modeling for industrial systems. J Qual Maint Eng 7(2):104–117
Dahane M, Rezg N (2011) Economic model of outsourcing for a subcontractor manufacturing system in a single subcontractor–multi-outsourcers relationship. In: Proceedings of IEEE conference on automation science and engineering, Trieste, Italy, 24–27 August 2011, pp 450–455
Dahane M, Dellagi S, Clementz C, Rezg N (2011) Development of joint maintenance and production strategies in a subcontracting environment. Int J Prod Res 49(23):1–25
Deavers KL (1997) Outsourcing: a corporate competitiveness strategy, not a search for low wages. J Lab Res 18(4):503–519
Dellagi S, Rezg N, Gharbi A (2010) Optimal maintenance/production policy for a manufacturing system subjected to random failure and calling upon several subcontractors. Int J Manag Sci Eng Manag 5(4):261–267
Dolgui A, Proth JM (2013) Outsourcing: definitions and analysis. Int J Prod Res 51(23–24):6769–6777
Dudek G, Stadtler H (2005) Negotiation-based collaborative planning between supply chains partners. Eur J Oper Res 163(3):668–687
Ezimadu PE, Nwozo CR (2017) Stochastic cooperative advertising in a manufacturer–retailer decentralized supply channel. J Ind Eng Int 13(1):1–12
Faghihinia E, Mollaverdi N (2012) Building a maintenance policy through a multi-criterion decision-making model. J Ind Eng Int. https://doi.org/10.1186/2251-712x-8-14
Geunes J, Chang B (2001) Operations research models for supply chain management and design. In: Floudas CA, Pardalos PM (eds) Encyclopedia of optimization, vol 4. Kluwer Academic Publishers, Dordrecht, pp 133–145
Gheidar Kheljani J, Ghodsypour SH, Brien CO (2009) Optimizing whole supply chain benefit versus buyer’s benefit through supplier selection. Int J Prod Econ 121(2):482–493
Hajej Z, Dellagi S, Rezg N (2014) Joint optimization of maintenance and production policies with subcontracting and product returns. J Intell Manuf 25(3):589–602
Haoues M, Dahane M, Mouss NK, Rezg N (2011) Optimization of outsourcing activity under a win-win single outsourcer-single subcontractor relationship. In: Proceedings of the 41st international conference on computers & industrial engineering, Los Angeles, CA USA, October 23–25, 2011, pp 343–348
Haoues M, Dahane M, Mouss NK, Rezg N (2012) Integrated maintenance problem in two-stage supply chain coordination with an outsourcing option. In: Proceedings of the 42st international conference on computers & industrial engineering, Cie & Saiie, Cape Town, South Africa, 16–18 July, pp 937–951
Haoues M, Dahane M, Mouss NK (2016) Outsourcing optimization in two-echelon supply chain network under integrated production-maintenance constraints. J Intell Manuf. https://doi.org/10.1007/s10845-016-1273-3
Heydari J, Norouzinasab Y (2015) A two-level discount model for coordinating a decentralized supply chain considering stochastic price-sensitive demand. J Ind Eng Int 11(4):531–542
Jayaraman V, Pirkul H (2001) Planning and coordination of production and distribution facilities for multiples commodities. Eur J Oper Res 133(2):394–408
Khatab A, Dahane M, Ait-Kadi D (2014) Genetic algorithm for selective maintenance optimization of multi-mission oriented systems. In: Proceedings of the European safety and reliability conference, Wroclaw, Poland, September 14–18, 2014, pp 859–865
Kim B (2003) Dynamic outsourcing to contract manufacturers with different capabilities of reducing the supply cost. Int J Prod Econ 86(1):63–80
Krapp M, Kraus JB (2017) Coordination contracts for reverse supply chains: a state-of-the-art review. J Bus Econ. https://doi.org/10.1007/s11573-017-0887-z
Lee IS, Sung CS (2008) Minimizing due date related measures for a single machine scheduling problem with outsourcing allowed. Eur J Oper Res 186(3):931–952
Lehoux N, D’Amours S, Langevin A (2010) A win-win collaboration approach for a two-echelon supply chain: a case study in the pulp and paper industry. Eur J Ind Eng 4(4):493–514
Nagali V, Hwang J, Sanghera D, Gaskins M, Pridgen M, Thurston T, Mackenroth P, Scholler P, Shoemaker G (2008) Procurement risk management (PRM) at Hewlett-Packard company. Interfaces 38(1):51–60
Özen U, Slikker M, Norde H (2009) A general framework for cooperation under uncertainty. Oper Res Lett 37(3):148–154
Rivera-Gómez H, Gharbi A, Kenné J-P, Montaño-Arango O, Hernandez-Gress ES (2016) Production control problem integrating overhaul and subcontracting strategies for a quality deteriorating manufacturing system. Int J Prod Econ 171(1):134–150
Rivera-Gómez H, Gharbi A, Kenné J-P, Montaño-Arango O, Hernandez-Gress ES (2018) Subcontracting strategies with production and maintenance policies for a manufacturing system subject to progressive deterioration. Int J Prod Econ 200(June 2018):103–118
Saharidis GKD, Kouikoglou VS, Dallery Y (2009) Centralized and decentralized control polices for a two-stage stochastic supply chain with subcontracting. Int J Prod Econ 117(1):117–126
Shahriari M, Shoja N, Ebrahimi Zade A, Barak S, Sharifi M (2016) JIT single machine scheduling problem with periodic preventive maintenance. J Ind Eng Int 12(3):299–310
Tambe PP, Kulkarni MS (2014) A novel approach for production scheduling of a high pressure die casting machine subjected to selective maintenance and a sampling procedure for quality control. Int J Syst Assur Eng Manag 5(3):407–426
Thomas DJ, Griffin PJ (1996) Coordinated supply chain management. Eur J Oper Res 94(1):1–15
Tsai W, Lai C (2007) Outsourcing or capacity expansions: application of activity-based costing model on joint products decisions. Comput Oper Res 34(12):3666–3681
Tsarouhas PH (2015) Performance evaluation of the croissant production line with reparable machines. J Ind Eng Int 11(1):101–110
Van Mieghem JA (1999) Coordinating investment, production, and subcontracting. Manag Sci 45(7):954–971
Zabihi F, Bafruei MK (2016) Supply chain coordination using revenue sharing contract with price discount and stochastic demand dependent on time and price. Int J Integr Supply Manag 10(2):132–150