Optimization of orifice position in particle-excitation valve for proportional flow control

Daisuke Hirooka1, Tomomi Yamaguchi1, Naomichi Furushiro1, Koichi Suzumori2, Takefumi Kanda3
1Department of Mechanical Engineering, Kansai University, 3-3-35 Yamate-cho, Suita-shi, Osaka 564-8680, Japan
2Graduate School of Engineering, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo, 152-8550, Japan
3Graduate School of National Science and Technology, Okayama University, 3-1-1 Tsushima-naka, Okayama, 700-8530, Japan

Tóm tắt

Từ khóa


Tài liệu tham khảo

Hong YP, Koo D, Park J, Kim S, Kim KS (2015) The Softgait: a simple and powerful weight-support device for walking and squatting. In: 2015 IEEE/RSJ international conference on intelligent robots and systems, pp 6338–6341

Hashimoto Y, Nagase J, Saga N, Satoh T (2016) Development and control of support function for upper limb support device. In: 2016 IEEE international conference on industrial technology, pp 1566–1571

Nomura K, Yonezawa T, Ogitsu T, Mizoguchi H, Takemura H (2015) Development of stewart platform type ankle-foot device for trip prevention support. In: 2015 37th annual international conference of the IEEE engineering in medicine and biology society, pp 4808–4811

Sanada K, Akiyama Y (2011) Power-assist chair using pneumatic actuator. Int J Autom Technol 5(4):502–507

Yagi E, Harada D, Kobayashi M (2009) Upper-limb power-assist control for agriculture load lifting. Int J Autom Technol 3(6):716–722

Li X, Noritsugu T, Takaiwa V, Sasaki D (2013) Design of wearable power assist wear for low back support using pneumatic actuators. Int J Autom Technol 7(2):228–236

Ribuan MN, Wakimoto S, Suzumori K, Kanda T (2016) Omnidirectional soft robot platform with flexible actuators for medical assistive device. IJAT 10(4):497–501

Akagi T, Dohta S, Matsui Y, Tamaki H, Kato N (2016) Low-cost wearable rehabilitation devices using flexible pneumatic cylinder with built-in pneumatic driving system. In: 2016 IEEE international conference on advanced intelligent mechatronics (AIM), pp 89–93

Loh CT, Tsukagoshi H (2014) Pneumatic big-hand gripper with slip-in tip aimed for the transfer support of the human body. In: 2014 IEEE international conference on robotics & automation, pp 475–481

Kurumaya S, Suzumori K, Nabae H, Wakimoto S (2016) Musculoskeletal lower-limb robot driven by multifilament muscles. Robomech J 3:18

Ueda H, Akagi T, Dohta S (2010) Development of 2-position 3-port control valve with self-holding function. In: Proceedings of SICE annual conference 2010, pp 1239–1243

Nasir A, Akagi T, Dohta S, Ono A (2015) Analysis of low-cost wearable servo valve using buckled tubes for optimal arrangement of tubes. In: 2015 IEEE international conference on advanced intelligent mechatronics, pp 831–835

Li B, Gao L, Yang G (2013) Evaluation and compensation of steady gas flow force on the high-pressure electro-pneumatic servo valve direct-driven by voice coil motor. Energy Convers Manag 67:92–102

Jien S, Hirai S, Honda K (2010) Miniaturization design of piezoelectric vibration-driven pneumatic unconstrained valves. JRM 22(1):91–99

Fritz KP, Mayer V, Steffens T, Kück H (2010) Switching valve with isolated impact actuator. In: 12th International conference on new actuators, pp 242–245

Yun SN, Ham YB, Park JH, So HJ, Lee IY (2008) Pneumatic valve with a pressure regulator for bimorph type PZT actuator. J Electroceramics 20:215–220

Yun SN, Jeong HH, Kim DG, Jeong EA, Kim HH (2011) New strategy for design and fabricating of a grain sorting system using high-speed piezoelectric valves. In: Proceedings of the 8th JFPS international symposium on fluid power, OKINAWA 2011, 1D-1, pp 270–275

Zeng H, Yuan RB, Sun C, Zhang Z (2012) Study on performance of laminated piezoelectric pneumatic servo valve. Proc Eng 31:1140–1148

Park JH, Yoshida K, Yokota S (1999) Resonantly driven piezoelectric micropump fabrication of a micropump having high power density. Mechatronics 9:687–702

Gang B, Tinghai C, Yao H, Xiangdong G, Han G (2011) A nozzle flapper electro-pneumatic proportional pressure valve driven by piezoelectric motor. In: Proceedings of 2011 international conference on fluid power and mechatronics, pp 191–195

Lingcong N, Xiaoxian Y, Qing L (2008) Modeling and simulation of ultrasonic motor driving jet-pipe servo valve system. In: 2008 Asia simulation conference-7th international conference on system simulation and scientific computing, pp 689–692

Bang YB, Joo CS, Lee KL, Hur JW, Lim WK (2003) Development of a two-stage high, speed electrohydraulic servo valve system using stack-type piezoelectric-elements. In: Proceedings of the 2003 IEEE/ASME international conference on advanced intelligent mechatronics, pp 131–136

Karunanidhi S, Singaperumal M (2010) Design, analysis and simulation of magnetostrictive actuator and its application to high dynamic servo valve. Sens Actuators A 157:185–197

Sente P, Vloebergh C, Labrique F, Alexandre P (2008) Control of a direct-drive servo-valve actuated by a linear amplified piezoelectric. In: Proceedings of the 2008 international conference on electrical machines, 1051, pp 1–6

Zhang D, Lv J, Jiang Y, Chen H, Fu J (2014) A piezoelectric microvalve with a flexure-hinged driving frame and microfabricated silicon sealing pair. Mechatronics 24:511–518

Jeon J, Nguyen QH, Han YM, Choi SB (2013) Design and evaluation of a direct drive valve actuated by piezostack actuator. Adv Mech Eng 986812:1–12

Lindler JE, Anderson EH (2002) Piezoelectric direct drive servovalve. In: Industrial and commercial applications of smart structures technologies 2002, 4698-53, pp 1–9

Zhou M, Gao W, Yang Z, Tian Y (2012) High precise fuzzy control for piezoelectric direct drive electro-hydraulic servo valve. J Adv Mech Des Syst Manuf 6(7):1154–1167

Hirooka D, Suzumori K, Kanda T (2009) Flow control valve for pneumatic actuators using particle excitation by PZT vibrator. Sens Actuators A 155(2):285–289

Hirooka D, Yamaguchi T, Furushiro N, Suzumori K, Kanda T (2016) Development of novel particle excitation flow control valve for stable flow characteristics. Int J Autom Technol 10(4):540–548

Hirooka D, Suzumori K, Kanda T (2011) Design and evaluation of orifice arrangement for particle-excitation flow control valve. Sens Actuators A 171(2):283–291

Hirooka D, Yamaguchi T, Furushiro N, Suzumori K, Kanda T (2017) Particle-excitation flow control valve using piezo vibration-improvement for high flow rate and research on controllability. IEEJ Trans Sens Micromach 137(1):32–37

Kawashima K, Kagawa T, Fujita T (2000) Instantaneous flow rate measurement of ideal gases. J Dyn Syst Meas Control 122:174–178

Timoshenko S, Krieger SW (1959) Theory of plates and shells, 2nd edn. McGraw-Hill, New York