Optimization of cutting parameters for turning Al-SiC(10p) MMC using ANOVA and grey relational analysis

Kunz, J. M. and Bampton, C. C., “Challenges to developing and producing MMCs for space applications,” Journal of Material Processing Technology, Vol. 53, No. 4, pp. 22–25, 2001.

Paulo Davim, J., “Diamond tool performance in machining metal matrix composites,” Journal of Material Processing Technology, Vol. 128, No. 1–3, pp. 100–105, 2002.

Lane, G., “The effect of different reinforcement on PCD tool life for aluminium composites,” Proc. of the Machining of Composites Materials Symposium, pp. 3–15, 1992.

Heat, P., “Cutting composites with PCD,” Composites and Manufacturing, Vol. 7, No. 3, pp. 1–3, 1991.

Chadwick, G. A. and Heat, P., “Machining metal matrix composites,” Metals and Materials, Vol. 6, pp. 73–76, 1990.

Clyne, T. and Withers, P. “An introduction to metal matrix composites, (Cambridge Solid State Science Series),” Cambridge University Press, pp. 1–10, 1995.

Tomac, N., Tonnessen, K. and Rasch, F. O., “Machinability of particulate aluminium matrix composites,” Annals of CIRP, Vol. 41, No. 1, pp. 55–58, 1992.

Chadwick, G. A. and Heat, P., “The machining of metal matrix composites with polycrystalline diamond tools,” Proc of the Seventh Conference on Materials Resolutions Through the 90s, No. 33, pp. 1–10, 1989.

Joshi, S. S., Ramakrishnan, N., Nagarwalla, H. E. and Ramakrishnan, P., “Wear of rotary tools in machining of Al/SiCp composites,” Wear, Vol. 230, No. 2, pp. 124–132, 1999.

Teti, R., “Machining of composites materials,” Annals of CIRP, Vol. 51, No. 2, pp. 611–634, 2002.

Andrewes, C., Feng, H. and Lau, W., “Machining of an aluminum/SiC composite using diamond inserts,” Journal of Material Processing Technology, Vol. 102, No. 1–3, pp. 25–29, 2000.

Tosun, N., “Determination of optimum parameters for multiperformance characteristics in drilling using grey relational analysis,” International Journal of Advanced Manufacturing Technology, Vol. 28, No. 5–6, pp. 450–455, 2006.

Pan, L. K., Wang, C. C., Wei, S. L. and Sher, H. F., “Optimizing multiple quality characteristics via taguchi-based grey relational analysis,” Journal of Material Processing Technology, Vol. 182, No. 1–3, pp. 107–116, 2007.

Chiang, Y.-M. and Hsieh, H.-H., “The use of the taguchi method with grey relational analysis to optimize the thin-film sputtering process with multiple quality characteristic in color filter manufacturing,” Computers & Industrial Engineering, Vol. 56, No. 2, pp. 648–661, 2009.

Ross, P. J., “Taguchi techniques for quality engineering,” McGraw-Hill, 1998.

Phadke, M. S., “Quality Engineering using Robust Design,” Prentice Hall, 1989.

Hwang, Y. K., Lee, C. M. and Park, S. H., “Evaluation of Machinability According to the Changes in Machine Tools and Cooling Lubrication Environments and Optimization of Cutting Conditions Using Taguchi Method,” Int. J. Precis. Eng. Manuf., Vol. 10, No. 3, pp. 65–73, 2009.

Deng, J., “Introduction to grey system,” Journal of Grey System, Vol. 1, No. 1, pp. 1–24, 1989.

Lin, J. L. and Lin, C. L., “The use of the orthogonal array with grey relational analysis to optimize the electrical discharge machining process with multiple performance characteristics,” International Journal of Machine Tools & Manufacture, Vol. 42, No. 2, pp. 237–244, 2002.

Muthukrishnan, N. and Paulo Davim, J., “Optimization of machining parameters of Al/SiC-MMC with ANOVA and ANN analysis,” Journal of Material Processing Technology, Vol. 209, No. 1, pp. 225–232, 2009.

Uthayakumar, M., Prabhakaran, G., Aravindan, S. and Sivaprasad, J. V., “Precision Machining of an Aluminum Alloy Piston Reinforced with a Cast Iron Insert,” Int. J. Precis. Eng. Manuf., Vol. 10, No. 1, pp. 7–13, 2009.

Fisher, R. A., “Statistical Methods for Research Worker,” Oliver & Boyd, 1925.

Manna, A. and Bhattacharya, B., “Influence of machining parameters on the machinability of particulate reinforced Al/SiC MMC,” International Journal of Advanced Manufacturing Technology, Vol. 25, No. 9–10, pp. 850–856, 2005.

Paulo Davim, J. and Monteiro Baptista, A., “Relationship between cutting force and PCD cutting tool wear in machining silicon carbide reinforced aluminium,” Journal of Material Processing Technology, Vol. 103, No. 3, pp. 417–423, 2000.

Muthukrishnan, N., Murugan, M. and Prahladarao, K., “Machinability issues in turning of AlSiC (10p) metal matrix composites,” International Journal of Advanced Manufacturing Technology, Vol. 39, No. 3–4, pp. 211–218, 2008.

Muthukrishnan, N., Murugan, M. and Prahladarao, K., “An investi gation on the machinability of AlSiC metal matrix composites using PCD inserts,” International Journal of Advanced Manufacturing Technology, Vol. 38, No. 5–6, pp. 447–454, 2008.

Seeman, M., Ganesan, G., Karthikeyan, R. and Velayudham, A., “Study on tool wear and surface roughness in machining of particulate aluminum metal matrix composite-response surface methodology approach,” International Journal of Advanced Manufacturing Technology, Vol. 48, No. 5–8, pp. 613–624, 2010.

Ozben, T., Kilickap, E. and Cakir, O., “Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC,” Journal of Material Processing Technology, Vol. 198, No. 1–3, pp. 220–225, 2008.

Lin, J. T., Bhattacharyya, D. and Kecman, V., “Multiple regression and neural network analysis in composites machining,” Composites Science and Technology, Vol. 63, No. 3–4, pp. 539–548, 2003.

Yanming, Q. and Zehua, Z., “Tool wear and its mechanism for cutting SiC particle reinforced aluminium matrix composites,” Journal of Material Processing Technology, Vol. 100, No. 1–3, pp. 194–199, 2000.