Numerical modeling of the strand deposition flow in extrusion-based additive manufacturing

Additive Manufacturing - Tập 20 - Trang 68-76 - 2018
Raphaël Comminal1, Marcin P. Serdeczny1, David B. Pedersen1, Jon Spangenberg1
1Department of Mechanical Engineering, Technical University of Denmark, Kgs. Lyngby, Denmark

Tài liệu tham khảo

ISO/ASTM 52900, First edition, 2015-12-15.

Turner, 2014, A review of melt extrusion additive manufacturing processes: I. Process design and modeling, Rapid Prototyp. J., 20, 192, 10.1108/RPJ-01-2013-0012

Turner, 2015, A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness, Rapid Prototyp. J., 21, 250, 10.1108/RPJ-02-2013-0017

Mohamed, 2015, Optimization of fused deposition modeling process parameters: a review of current research and future prospects, Adv. Manuf., 3, 42, 10.1007/s40436-014-0097-7

Bikas, 2016, Additive manufacturing methods and modelling approaches: a critical review, Int. J. Adv. Manuf. Technol., 83, 389, 10.1007/s00170-015-7576-2

Yardimci, 1996, Part quality prediction tools for fused deposition processing, 539

Costa, 2008, Towards modelling of Free Form Extrusion: analytical solution of transient heat transfer, Int. J. Mater. Form., 1, 703, 10.1007/s12289-008-0312-9

Costa, 2015, Thermal conditions affecting heat transfer in FDM/FFE: a contribution towards the numerical modelling of the process, Virtual Phys. Prototyp., 10, 35, 10.1080/17452759.2014.984042

Zhou, 2016, Temperature analysis in the fused deposition modeling process, Proceedings of the 3rd International Conference on Information Science and Control Engineering, pp. 678

Jensen, 2017, Thermal modelling of extrusion based additive manufacturing of composite materials, Proceedings of the 21st International Conference on Composite Materials

Zhang, 2017, Numerical investigation of the influence of process conditions on the temperature variation in fused deposition modeling, Mater. Des., 130, 59, 10.1016/j.matdes.2017.05.040

Costa, 2017, Estimation of filament temperature and adhesion development in fused deposition techniques, J. Mater. Process. Technol., 245, 167, 10.1016/j.jmatprotec.2017.02.026

Zhang, 2017

Bellehumeur, 2004, Modeling of bond formation between polymer filaments in the fused deposition modeling process, J. Manuf. Processes, 6, 170, 10.1016/S1526-6125(04)70071-7

Thomas, 2000, Modeling the Fracture Strength Between Fused Deposition Extruded Roads, 16

McIlroy, 2017

Zhang, 2006, Three-dimensional finite element analysis simulations of the fused deposition modelling process, Proc. Inst. Mech. Eng. B J. Eng. Manuf., 220, 1663, 10.1243/09544054JEM572

Zhang, 2008, A parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysis, Proc. Inst. Mech. Eng. B J. Eng. Manuf., 222, 959, 10.1243/09544054JEM990

Zhou, 2017, Experimental and numerical investigation of the thermal behaviour of polylactic acid during the fused deposition process, Virtual Phys. Prototyp., 12, 221, 10.1080/17452759.2017.1317214

Brenken, 2017, Simulation of semi-crystalline composites in the extrusion deposition additive manufacturing process, Sci. Age Exp., 90

Favaloro, 2017, Simulation of polymeric composites additive manufacturing using abaqus, Sci. Age Exp., 103

Talagani, 2015, Numerical simulation of big area additive manufacturing (3D printing) of a full size car, SAMPE J., 51, 27

Ahn, 2009, Representation of surface roughness in fused deposition modeling, J. Mater. Process. Technol., 209, 5593, 10.1016/j.jmatprotec.2009.05.016

Ahn, 2011, Relation between surface roughness and overlap interval in fused deposition modeling, Adv. Mater. Res., 264, 1625, 10.4028/www.scientific.net/AMR.264-265.1625

Li, 2002, Composite modeling and analysis for fabrication of FDM prototypes with locally controlled properties, J. Manuf. Processes, 4, 129, 10.1016/S1526-6125(02)70139-4

Rodríguez, 2003, Mechanical behavior of acrylonitrile butadiene styrene fused deposition materials modeling, Rapid Prototyp. J., 9, 219, 10.1108/13552540310489604

Bellini, 2002, Fused Deposition of Ceramics: a Comprehensive Experimental, Analytical and Computational Study of Material Behavior, Fabrication Process and Equipment Design

Ramanath, 2008, Melt flow behaviour of poly-ε-caprolactone in fused deposition modelling, J. Mater. Sci., 19, 2541

Mostafa, 2009, A study of melt flow analysis of an ABS-Iron composite in fused deposition modelling process, Tsinghua Sci. Technol., 14, 29, 10.1016/S1007-0214(09)70063-X

Heller, 2016, Effects of extrudate swell and nozzle geometry on fiber orientation in Fused Filament Fabrication nozzle flow, Addit. Manuf., 12, 252, 10.1016/j.addma.2016.06.005

McIlroy, 2017, Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing, J. Rheol., 61, 379, 10.1122/1.4976839

Comminal, 2017, Numerical simulations of planar extrusion and fused filament fabrication of non-Newtonian fluids, Annu. Trans. Nord. Rheol. Soc., 25, 263

Dabiri, 2014, Fully resolved numerical simulations of fused deposition modeling, Proceedings of the ASME 2014 International Manufacturing Science and Engineering Conference

Du, 2016, An improved fused deposition modeling process for forming large-size thin-walled parts, J. Mater. Process. Technol., 234, 332, 10.1016/j.jmatprotec.2016.04.005

Fang, 2016, Study on metal deposit in the fused-coating based additive manufacturing, Procedia CIRP, 55, 115, 10.1016/j.procir.2016.08.034

Mackay, 2017, The performance of the hot end in a plasticating 3D printer, J. Rheol., 61, 229, 10.1122/1.4973852

Venkataraman, 1999, Mechanical and rheological properties of feedstock material for fused deposition of ceramics and metals (FDC and FDMet) and their relationship to process performance, 351

Jiang, 2004, Controlling parameters for polymer melting and extrusion in FDM, Key Eng. Mater., 259, 667, 10.4028/www.scientific.net/KEM.259-260.667

Bellini, 2004, Liquefier dynamics in fused deposition, J. Manuf. Sci. Eng., 126, 237, 10.1115/1.1688377

Bukkapatnam, 2007, Dynamic modeling and monitoring of contour crafting—an extrusion-based layered manufacturing process, J. Manuf. Sci. Eng., 129, 135, 10.1115/1.2375137

Tlegenov, 2017, A dynamic model for nozzle clog monitoring in fused deposition modelling, Rapid Prototyp. J., 23, 391, 10.1108/RPJ-04-2016-0054

ANSYS® Fluent, 2013

Patankar, 1980

Scardovelli, 1999, Direct numerical simulation of free-surface and interfacial flow, Annu. Rev. Fluid Mech., 31, 567, 10.1146/annurev.fluid.31.1.567

Comminal, 2015, Cellwise conservative unsplit advection for the volume of fluid method, J. Comput. Phys., 283, 582, 10.1016/j.jcp.2014.12.003

Sethian, 2003, Level set methods for fluid interfaces, Annu. Rev. Fluid Mech., 35, 341, 10.1146/annurev.fluid.35.101101.161105

Sussman, 2000, A coupled level set and volume-of-fluid method for computing 3D and axisymmetric incompressible two-phase flows, J. Comput. Phys., 162, 301, 10.1006/jcph.2000.6537

Li, 2017, Extrusion-on-demand methods for high solids loading ceramic paste in freeform extrusion fabrication, Virtual Phys. Prototyp., 12, 193, 10.1080/17452759.2017.1312735

Thông tin
Thông tin xuất bản

Additive Manufacturing

Tập 20

68-76

Thông tin tác giả