Novel elastomer‐dumbbell functionalized POSS composites: Thermomechanical and Morphological Properties

Wiley - Tập 123 Số 1 - Trang 585-600 - 2012
Steven Spoljaric1, Antonietta Genovese1, Robert A. Shanks1
1CRC for Polymers, Applied Sciences, RMIT University, Melbourne 3001, Australia

Tóm tắt

Abstract

Nanocomposites consisting of poly(styrene‐b‐butadiene‐b‐styrene) (SBS) and polyhedral oligomeric silsesquioxanes (POSS) were prepared using a solvent dispersion method. Dumbbell‐shaped POSS fillers were prepared using diacyl chlorides to bridge the POSS molecules. Infrared spectroscopy confirmed functionalization. Scanning electron microscopy revealed an increase in filler aggregation with concentration, with preferential phase selectivity. Polydispersity increased with filler concentration while d spacing was influenced by phase selectivity and domain‐filler compatibility. Functionalized POSS improved thermal stability by imparting restrictions of SBS chain motions. Tensile stress–strain analysis revealed an increase in modulus, yield strength, and strain hardening with filler concentration, while creep deformation decreased and permanent strain increased with POSS content. Storage modulus, loss modulus, and glass transition temperature increased with filler content due to effective SBS–POSS interaction. Nanocomposite properties were influenced by filler concentration, the phase of the filler was dispersed throughout and the length of the alkyl “barbell” on the dumbbell‐shaped POSS. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011

Từ khóa


Tài liệu tham khảo

10.1016/0923-1137(91)90245-J

10.1016/j.molcata.2007.11.034

Jeon Y. M., 2007, J Ind Eng Chem, 13, 518

10.1016/0143-7208(90)87010-Z

Bianchi C.;Noor S.;Mirley C. L.;Bauer R.;Yener D.US Patent 7 479 324 2009.

10.1021/ac062165h

10.1080/10408430701776680

10.1016/S1464-391X(08)70134-X

10.1021/ja01207a003

10.1002/app.24645

Al Ghatta H.;Abbenhuis H. C. L.Organization WIPO Patent 009 707 2008.

10.1021/cm070726v

10.1021/cm703641s

2008, Hybrid Plastics™ POSS®. Chem Catalog, 36

10.1021/ma048448y

10.1021/ma00060a053

10.1016/j.polymer.2010.03.028

10.1021/ma900090j

10.1002/macp.201000051

10.1002/(SICI)1099-0488(199808)36:11<1857::AID-POLB7>3.0.CO;2-N

10.1016/S0032-3861(03)00027-2

10.1021/cm950536x

10.1021/ma960846g

10.1016/j.matlet.2008.04.074

10.1021/ma901835n

10.1016/j.polymer.2006.06.050

10.1021/ma0618171

Mather P. T.;Kim B. S.;Qing G.;Liu C.US Patent 20040024098 2004.

10.1016/j.progpolymsci.2004.06.002

10.1016/j.polymer.2003.08.011

10.1002/9783527610570.ch16

10.1002/masy.200590016

10.1002/app.10614

10.1016/j.compositesa.2008.12.008

10.1002/pc.20631

10.1021/ma0518813

10.1021/ma062393d

10.1021/ma049753m

10.1039/tf9706600080

10.1515/POLYENG.2001.21.6.489

10.1039/b505372m

Coates J., 2000, In Encyclopedia of Analytical Chemistry, 10815

10.1021/ma000902k

Romo‐Uribe A., 2007, Revista Mexicana De Física, 53, 171

Causin V., 2010, In Rubber Nanocomposites: Preparation, Properties, and Applications, 425, 10.1002/9780470823477.ch17

10.1016/j.compscitech.2010.03.014

10.1016/S1359-0294(03)00008-6

10.1016/j.biomaterials.2005.01.026

10.1134/1.1604429

10.1016/j.polymdegradstab.2007.06.008

10.1016/j.polymdegradstab.2006.04.031

10.1002/app.29414

10.1016/j.tca.2004.12.024

10.1002/app.12277

10.1109/TEI.1977.297979

10.1016/j.tca.2005.10.006

10.1007/s10118-010-8212-0

10.5012/bkcs.2008.29.1.181

10.1002/app.1988.070350706

10.1021/je00103a019

10.1002/jsl.3000060402

10.1016/S0032-3861(02)00548-7

10.1016/S0032-3861(00)00854-5

10.1021/ma00074a006

Kierkels J. T. A.PhD Thesis Technische Universiteit Eindhoven Eindhoven 2006.

10.1016/j.matdes.2008.09.045

10.1002/pat.574

10.1016/j.compositesa.2009.03.011

10.1002/mame.200600346

10.1201/9781420053135

Kaminski D.;Shanks R.In 32nd Condensed Matter and Materials Meeting Wagga Wagga Australia 2008.

10.1016/S0032-3861(00)00351-7

10.1016/j.msec.2009.01.015

10.1016/j.eurpolymj.2006.07.028

Thông tin
Thông tin xuất bản

Wiley

Tập 123 Số 1

585-600

Thông tin tác giả