Novel applications of composite structures to robots, machine tools and automobiles

Asada, 1987

Tsai, 1999

Lee, 1991, Manufacturing of a SCARA type direct-drive robot with graphite fiber epoxy composite materials, Robotica, 9, 219, 10.1017/S0263574700010274

Jeong, 1995, Experimental investigation of the dynamic characteristics of carbon fiber epoxy composite thin beams, Compos. Struct, 33, 77, 10.1016/0263-8223(95)00108-5

Lazan BJ. Multiple band surface treatments for high damping. AFML-TR-65-269, OH, 1965

Nashif, 1985

Sun, 1995

Lee, 1988, Manufacturing and testing of chatter free boring bars, Ann. CIRP, 37, 365, 10.1016/S0007-8506(07)61655-2

Lee, 1997, Design and manufacture of an aerostatic spindle bearing system with carbon fiber–epoxy composites, J. Compos. Mater, 34, 1150, 10.1177/002199830003401401

Weck, 1993, Spindle-bearing systems for high-speed application in machine tools, Ann. CIRP, 42, 445, 10.1016/S0007-8506(07)62482-2

Tlusty, 2000

Koenigsberger, 1970

Wardle, 1983, Dynamic and static characteristics of a wide speed range machine tool spindle, Precision, 5, 175, 10.1016/0141-6359(83)90097-1

Stone, 1982, The state of the art in the measurement of the stiffness and damping of rolling element bearing, Ann. CIRP, 32, 529, 10.1016/S0007-8506(07)60175-9

Peter J. Damping in machine tool construction. In: Proceeding of Sixth International M.T.D.R Conference, 1965. p. 191–210

Vandeurxen, 1981, Additive damping treatments for mechanical structures, Ann. CIRP, 1, 269, 10.1016/S0007-8506(07)60940-8

Lee, 2003, Design and manufacture of a carbon fiber epoxy rotating boring bar, Compos. Struct, 60, 115, 10.1016/S0263-8223(02)00287-8

Cook, 1996

Harris, 1998

Hoshi, 1990

Setareh, 2001, Use of semi-active tuned mass dampers for vibration control of force-excited structures, Struct. Eng. Mech, 4, 341, 10.12989/sem.2001.11.4.341

Kim, 1987, Suppression of machine tool chatter using a viscoelastic dynamic damper, ASME J. Eng. Ind, 109, 58, 10.1115/1.3187095

Kinra, 1992

Kang, 1963, Chatter vibration in precision boring, Mach. Tool Dev. Prod. Eng. Res. Conf. ASME, 171

Callister, 1997

Weeton, 1986

Cho, 1997, Manufacturing of one-piece automotive drive shaft with aluminum and composite materials, Compos. Struct, 38, 309, 10.1016/S0263-8223(97)00065-2

Lee, 2000, Development of composite pressing rollers for thin film processing, J. Compos. Mater, 34, 770, 10.1177/002199830003400903

Nagano, 1997, Kobe steel. Development of a composite boring bar, Compos. Struct, 38, 531, 10.1016/S0263-8223(97)00089-5

Choi, 1996, An experimental study of the static torque capacity of the adhesively-bonded tubular single lap joint, J. Adhes, 55, 245, 10.1080/00218469608009950

Kim, 2000, Grinding characteristics of carbon fiber epoxy composite hollow shafts, J. Compos. Mater, 34, 2016, 10.1177/002199800772661958

Mallick, 1977, Static and impact properties of laminated hybrid composites, J. Test Eval, 5, 190, 10.1520/JTE11637J

Cheon, 1999, Impact energy absorption characteristics of glass fiber hybrid composites, Compos. Struct, 46, 267, 10.1016/S0263-8223(99)00064-1

Lee, 2001, Impact characteristics of glass fiber composites with respect to fiber volume fraction, J. Compos. Mater, 35, 27, 10.1177/002199801772661858

Cheon, 1995, Development of the composite bumper beam for passenger cars, Compos. Struct, 32, 491, 10.1016/0263-8223(95)00078-X

Cheon, 1997, Composite side-door impact beams for passenger cars, Compos. Struct, 38, 229, 10.1016/S0263-8223(97)00058-5

Mallick, 1990

Schmelz, 1992

Reimpell, 1996

Rao, 1993, Dynamic analysis and design of laminated composite beams with multiple damping layers, AIAA J, 31, 736, 10.2514/3.11611

He, 1994, Residual stresses and delamination problems induced by co-curing of damped composite laminates, J. Compos. Mater, 28, 112, 10.1177/002199839402800202

Lee, 2004, Torsional fatigue characteristics of aluminum/composite co-cured shafts with axial compressive preload, J. Compos. Mater, 38, 737, 10.1177/0021998304042479