New Developments of Ti-Based Alloys for Biomedical Applications

Park, 2000, Biomaterials: Introduction, The Biomedical Engineering Handbook, 1, IV1

Temenoff, J.S., and Mikos, A.G. (2008). Biomaterials: The Intersection of Biology and Materials Science, Pearson/Prentice Hall.

Hanawa, 2006, Recent development of new alloys for biomedical use, Mater. Sci. Forum, 512, 243, 10.4028/www.scientific.net/MSF.512.243

Lütjering, G., and Williams, J.C. (2003). Titanium, Springer. [2nd ed].

Long, 1998, Titanium alloys in total joint replacement—A materials science perspective, Biomaterials, 19, 1621, 10.1016/S0142-9612(97)00146-4

Bothe, 1940, Reaction of bone to multiple metallic implants, Surg. Gynecol. Obstet, 71, 598

Leventhal, 1951, Titanium, a metal for surgery, J. Bone Jt. Surg, 33, 473, 10.2106/00004623-195133020-00021

Bannon, B.P., and Mild, E.E. (1983). Titanium Alloys in Surgical Implants, ASTM.

Oliveira, 1998, Preparation and characterization of Ti-Al-Nb alloys for orthopedic implants, Braz. J. Chem. Eng, 17, 326, 10.1590/S0104-66321998000400002

Kimura, 1980, Mechanical Properties and Tissue Reactions of a Titanium Alloy for Implant Material, Titanium’80, Science and Technology, 1, 505

Niinomi, 2002, Recent metallic materials for biomedical applications, Metall. Mater. Trans. A, 33, 477, 10.1007/s11661-002-0109-2

Evans, 1976, Mechanical properties and histology of cortical bone from younger and older men, Anat. Rec, 185, 1, 10.1002/ar.1091850102

Lindahl, 1967, Cortical bone in man II. Variation in tensile strength with age and sex Acta Orthop, Scand, 38, 141

Rho, 1997, Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation, Biomaterials, 18, 1325, 10.1016/S0142-9612(97)00073-2

Lindahl, 1976, Mechanical Properties of Dried Defatted Spongy Bone, Acta Orthop. Scand, 47, 11, 10.3109/17453677608998966

Dalstra, 1997, Age variations in the properties of human tibial trabecular bone, J. Bone J. Surg, 79, 995, 10.1302/0301-620X.79B6.0790995

Gross, 2001, A finite element analysis of hollow stemmed hip prostheses as a means of reducing stress shielding of the femur, J. Biomech, 34, 995, 10.1016/S0021-9290(01)00072-0

Kuroda, 1998, Design and mechanical properties of new β type titanium alloys for implant materials, Mater. Sci. Eng. A, 243, 244, 10.1016/S0921-5093(97)00808-3

Hao, 2003, Aging response of the Young’s modulus and mechanical properties of Ti-29Nb-13Ta-4.6Zr, Metall. Mater. Trans. A, 34, 1007, 10.1007/s11661-003-0230-x

Sakaguchi, 2005, Relationship between tensile deformation behavior and microstructure in Ti-Nb-Ta-Zr, Mater. Sci. Eng. C, 25, 363, 10.1016/j.msec.2004.12.014

Niinomi, 2007, Mechanical characteristics and microstructure of drawn wire of Ti-29Nb-13Ta-4.6Zr for biomedical applications, Mater. Sci. Eng. C, 27, 154, 10.1016/j.msec.2006.04.008

Kuroda, 2005, Mechanical properties and microstructures of new Ti-Fe-Ta and Ti-Fe-Ta-Zr system alloys, Mater. Sci. Eng. C, 25, 312, 10.1016/j.msec.2005.04.004

Nag, 2005, Microstructural evolution and strengthening mechanisms in Ti-Nb-Zr-Ta, Ti-Mo-Zr-Fe and Ti-15Mo biocompatible alloys, Mater. Sci. Eng. C, 25, 357, 10.1016/j.msec.2004.12.013

Wang, 1996, The use of titanium for medical applications in the USA, Mater. Sci. Eng. A, 213, 134, 10.1016/0921-5093(96)10243-4

Qazi, 2005, Metastable beta titanium alloys for orthopedic applications, Adv. Eng. Mater, 7, 993, 10.1002/adem.200500060

Brailovski, 2011, Bulk and porous metastable beta Ti-Nb-Zr (Ta) alloys for biomedical applications, Mater. Sci. Eng. C Mater. Biol. Appl, 31, 643, 10.1016/j.msec.2010.12.008

Matsumoto, H., Watanabe, S., and Hanada, S. (2006, January 14–16). Strengthening of low Young’s modulus beta Ti-Nb-Sn alloys by thermomechanical processing, Boston, MA, USA.

Gibson, 1985, The mechanical behavior of cancellous bone, J. Biomech, 18, 317, 10.1016/0021-9290(85)90287-8

Robertson, 1976, Preliminary observations of bone in growth into porous materials, J. Biomed. Mater. Res, 10, 335, 10.1002/jbm.820100304

Cameron, 1978, A porous metal system for joint replacement surgery, Int. J. Artif. Organs, 1, 104

Head, 1995, Titanium as the material of choice for cementless femoral components in total hip arthroplasty, Clin. Orthop. Relat. Res, 311, 85

Schneider, 1989, A comparative study of the initial stability of cementless hip prostheses, Clin. Orthop. Relat. Res, 248, 200, 10.1097/00003086-198911000-00032

Kujala, 2003, Effect of porosity on the osteointegration and bone ingrowth of a weight-bearing nickel–titanium bone graft substitute, Biomaterials, 24, 4691, 10.1016/S0142-9612(03)00359-4

Homsy, 1972, Porous implant systems for prosthesis stabilization, Clin. Orthop, 89, 220, 10.1097/00003086-197211000-00029

Pilliar, 1987, Porous-surfaced metallic implants for orthopedic applications, J. Biomed. Mater. Res, 21, 1

Kienapfel, 1999, Implant fixation by bone ingrowth, J. Arthroplast, 14, 355, 10.1016/S0883-5403(99)90063-3

Karageorgiou, 2005, Porosity of 3D biomaterial scaffolds and osteogenesis, Biomaterials, 26, 5474, 10.1016/j.biomaterials.2005.02.002

Zhuravleva, 2013, Porous low modulus Ti40Nb compacts with electrodeposited hydroxyapatite coating for biomedical applications, Mater. Sci. Eng. C, 33, 2280, 10.1016/j.msec.2013.01.049

Degischer, K. (2002). Handbook of Cellular Metals, Wiley-VCH Verlag.

Weber, 1972, Carbon-metal graded composites for permanent osseous attachment of non-porous metals, Mater. Res. Bull, 7, 1005, 10.1016/0025-5408(72)90092-X

Klawitter, 1974, The status of porous materials to obtain direct skeletal attachment by tissue ingrowth, Acta Orthop. Belg, 40, 755

Sauer, 1974, The role of porous polymeric materials in prosthesis attachment, J. Biomed. Mater. Res, 8, 145, 10.1002/jbm.820080315

Hirschhorn, 1971, Porous titanium surgical implant materials, J. Biomed. Mater. Res, 2, 49, 10.1002/jbm.820050608

Hahn, 1970, Preliminary evaluation of porous metal surfaced titanium for orthopedic implants, J. Biomed. Mater. Res, 4, 571, 10.1002/jbm.820040407

Karagienes, 1973, Porous metals as a hard tissue substitute, Biomater. Med. Dev. Artif. Organs, 1, 171, 10.3109/10731197309118871

Yoshikawa, 2005, Bone tissue engineering with porous hydroxyapatite ceramics, J. Artif. Organs, 8, 131, 10.1007/s10047-005-0292-1

Rezwan, 2006, Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering, Biomaterials, 27, 3413, 10.1016/j.biomaterials.2006.01.039

Wen, 2002, Novel titanium foam for bone tissue engineering, J. Mater. Res, 17, 2633, 10.1557/JMR.2002.0382

Sohiera, 2008, Rapid prototyped porous titanium coated with calcium phosphate as a scaffold for bone tissue engineering, Biomaterials, 29, 2608, 10.1016/j.biomaterials.2008.02.021

Yamada, 2000, Processing of cellular magnesium materials, Adv. Eng. Mater, 2, 184, 10.1002/(SICI)1527-2648(200004)2:4<184::AID-ADEM184>3.0.CO;2-W

Oh, 2003, Mechanical properties of porous titanium compacts prepared by powder sintering, Scr. Mater, 49, 1197, 10.1016/j.scriptamat.2003.08.018

Li, 2005, A novel porous Ti6Al4V: Characterization and cell attachment, J. Biomed. Mater. Res, 73A, 223, 10.1002/jbm.a.30278

Li, 2006, Porous Ti6Al4V scaffold directly fabricating by rapid prototyping: Preparation and in vitro experiment, Biomaterials, 27, 1223, 10.1016/j.biomaterials.2005.08.033

Markaki, 2001, The effect of cell wall microstructure on the deformation and fracture of aluminium-based foams, Acta Mater, 49, 1677, 10.1016/S1359-6454(01)00072-6

Heinl, 2008, Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting, Acta Biomater, 4, 1544, 10.1016/j.actbio.2008.03.013

Hayashi, 1991, Quantitative analysis of in vivo tissue responses to titanium-oxide and hydroxyapatite-coated titanium alloy, J. Biomed. Mater. Res, 25, 515, 10.1002/jbm.820250408

He, 2012, Porous titanium materials with entangled wire structure for load-bearing biomedical applications, J. Mech. Behav. Biomed. Mater, 5, 16, 10.1016/j.jmbbm.2011.09.016

Burstein, 1976, Aging of bone tissue: Mechanical properties, J. Bone Jt. Surg, 58, 82, 10.2106/00004623-197658010-00015

Black, J., and Hastings, G. (1998). Handbook of Biomaterial Properties, Chapman & Hall.

Vinz, 1975, Change in the mechanical properties of human compact bone tissue upon aging, Mech. Compos. Mater, 11, 568

Geetha, 2009, Ti based biomaterials, the ultimate choice for orthopaedic implants—A review, Prog. Mater. Sci, 54, 397, 10.1016/j.pmatsci.2008.06.004

Wang, 2010, Porous Ti-24Nb-4Zr-8Sn alloy for biomedical applications fabricated by space-holder method, Chin. J. Nonferr. Met, 20, s967

Hrabe, N.W. (2010). Characterization of Cellular Titanium for Biomedical Applications. [Ph.D. Thesis, University of Washington].

Moyen, 1978, Effects on intact femora of dogs of the application and removal of metal plates. A metabolic and structural study comparing stiffer and more flexible plates, J. Bone Jt. Surg, 60, 940, 10.2106/00004623-197860070-00012

Williams, 2008, On the mechanisms of biocompatibility, Biomaterials, 29, 2941, 10.1016/j.biomaterials.2008.04.023

Wataria, 2004, Biocompatibility of materials and development to functionally graded implant for bio-medical application, Compos. Sci. Technol, 64, 893, 10.1016/j.compscitech.2003.09.005

Calin, 2013, Designing biocompatible Ti-based metallic glasses for implant applications, Mater. Sci. Eng. C, 33, 875, 10.1016/j.msec.2012.11.015

Hallab, 2005, Lymphocyte responses in patients with total hip arthroplasty, J. Orthop. Res, 23, 384, 10.1016/j.orthres.2004.09.001

Shabalovskaya, 2002, Surface, corrosion and biocompatibility aspects of Nitinol as an implant material, Biomed. Mater. Eng, 12, 69

Sargeant, 2006, Hip implants: Paper V. Physiological effects, Mater. Des, 27, 287, 10.1016/j.matdes.2004.10.028

Liang, 1967, Tissue reaction in rabbit muscle exposed to metallic implants, J. Biomed. Mater. Res, 1, 135, 10.1002/jbm.820010113

Viceconti, 2000, Large-sliding contact elements accurately predict levels of bone-implant micromotion relevant to osseointegration, J. Biomech, 33, 1611, 10.1016/S0021-9290(00)00140-8

Alves, 2005, Nitriding of titanium disks and industrial dental implants using hollow cathode discharge, Surf. Coat. Technol, 194, 196, 10.1016/j.surfcoat.2004.10.009

Brizuela, 2002, Tribological study of lubricious DLC biocompatible coatings, J. Mater. Sci. Mater. Med, 13, 1129, 10.1023/A:1021129718737

Gepreel, 2013, Biocompatibility of Ti-alloys for long-term implantation, J. Mech. Behav. Biomed. Mater, 20, 407, 10.1016/j.jmbbm.2012.11.014

Ramakrishna, 2001, Biomedical applications of polymer-composite materials: A review, Compos. Sci. Technol, 61, 1189, 10.1016/S0266-3538(00)00241-4

Wise, D.L. (2000). Biomaterials Engineering and Devices, Humana Press.

Park, J.B., and Bronzino, J.D. (2003). Biomaterials: Principles and Applications, CRC Press.

Hulth, 1989, Current concepts of fracture healing, Clin. Orthop, 249, 265, 10.1097/00003086-198912000-00028

Hutzschenreuter, P., and Brümmer, H. (1980). Current Concepts of Internal Fixation, Springer-Verlag.

Cochran, G.V.B. (1982). Primer in Orthopaedic Biomechanics, Churchill Livingstone.

Sarmiento, 1990, Cup containment and orientation in cemented total hip arthroplasties, J. Bone Jt. Surg, 72B, 996, 10.1302/0301-620X.72B6.2246305

Insall, 1993, Biomechanics, Surgery of the Knee, 7, 43

Brunette, D., Tengvall, P., Textor, M., and Thomsen, P. (2001). Titanium in Medicine, Springer-Verlang.

Kurtz, 2007, Projections of primary and revision hip and knee arthroplasty in the United States from 2005 to 2030, J. Bone Jt. Surg. Am, 89, 780, 10.2106/00004623-200704000-00012

Available online: http://www.orthoinfo.aaos.org.

Niinomi, 2007, Recent research and development in metallic materials for biomedical, dental and healthcare products, Mater. Sci. Forum, 539–543, 193, 10.4028/www.scientific.net/MSF.539-543.193

Whitcher, 1997, Simulation of in vivo loading conditions of nitinol vascular stent structures, Comput. Struct, 64, 1005, 10.1016/S0045-7949(97)00014-X

Sakaguchi, 2005, Effect of Ta content on mechanical properties of Ti-30Nb-XTa-5Zr, Mater. Sci. Eng. C, 25, 370, 10.1016/j.msec.2005.04.003

Nobuhito, 2004, Effects of alloying elements on elastic modulus of Ti-Nb-Ta-Zr system alloy for biomedical applications, Mater. Sci. Forum, 449–452, 1269

Sakaguchi, 2003, Effect of Nb content on microstructure, tensile properties and elastic modulus of Ti-XNb-10Ta-5Zr alloys for biomedical applications, J. Jpn. Inst. Met, 67, 681, 10.2320/jinstmet1952.67.11_681

Ozaki, 2005, Development of beta titanium alloys with low Young’s modulus, Adv. Mater. Process, 163, 68

Calin, 2013, Thermal stability and phase transformations of martensitic Ti-Nb alloys, Sci. Technol. Adv. Mater, 14, 055004:1

Ho, 2009, Structure, mechanical properties and grind ability of dental Ti-10Zr-X alloys, Mater. Sci. Eng. C, 29, 36, 10.1016/j.msec.2008.05.004

Zhen, 2006, Influence of martensitic transformation on mechanical compatibility of biomedical β type titanium alloy TLM, Mater. Sci. Eng. A, 438–440, 391

Inoue, 2000, Stabilization of metallic supercooled liquid and bulk amorphous alloys, Acta Mater, 48, 279, 10.1016/S1359-6454(99)00300-6

Guglielmotti, 1999, A histomorphometric study of tissue interface by laminar implant test in rats, Int. J. Oral Maxillofac. Implant, 14, 565

Hsu, 2009, The structure and mechanical properties of as-cast Zr-Ti alloys, J. Alloy. Compd, 488, 279, 10.1016/j.jallcom.2009.08.105

Schmidt, 2001, Proliferation and differentiation parameters of human osteoblasts on titanium and steel surfaces, J. Biomed. Mater. Res, 54, 209, 10.1002/1097-4636(200102)54:2<209::AID-JBM7>3.0.CO;2-7

Niinomi, 2003, Recent research and development in titanium alloys for biomedical applications and healthcare goods, Sci. Technol. Adv. Mater, 4, 445, 10.1016/j.stam.2003.09.002

Fuwa, 2007, Phase stability change with Zr content in β-type Ti-Nb alloys, Scr. Mater, 57, 1000, 10.1016/j.scriptamat.2007.08.003

Wang, 2010, Biomimetic modification of porous TiNbZr alloy scaffold for bone tissue engineering, Tissue Eng. A, 16, 309, 10.1089/ten.tea.2009.0074

Yaszemski, M.J., and Trantolo, D.J. (2004). Biomaterials in Orthopedics, Marcel Dekker Inc.

Laheerte, 2005, Influence of the microstructure on the pseudoelasticity of a metastable beta titanium alloy, Mater. Sci. Eng. A, 396, 223, 10.1016/j.msea.2005.01.022

Yang, 2005, Phase transformation and mechanical properties of the Ti50Zr30Nb10Ta10 alloy with low modulus and biocompatible, J. Alloy. Compd, 392, 291, 10.1016/j.jallcom.2004.08.099

Zhou, 2004, Decomposition of martensite α during aging treatments and resulting mechanical properties of Ti-Ta alloys, Mater. Sci. Eng. A, 384, 92, 10.1016/j.msea.2004.05.084

Li, 2013, Ultrafine-grained Ti-based composites with high strength and low modulus fabricated by spark plasma sintering, Mater. Sci. Eng. A, 560, 857, 10.1016/j.msea.2012.09.047

Ikeda, 2009, Isothermal aging behavior of beta titanium-manganese alloys, Mater. Trans, 50, 2737, 10.2320/matertrans.MA200902

Ikeda, 2012, Influence of Fe content of Ti-Mn-Fe alloys on phase constitution and heat treatment behavior, Mater. Sci. Forum, 706–709, 1893, 10.4028/www.scientific.net/MSF.706-709.1893

Ashida, 2012, Fabrication of Ti-Sn-Cr shape memory alloy by PM and its properties, Mater. Sci. Forum, 706–709, 1943, 10.4028/www.scientific.net/MSF.706-709.1943

Murayama, 2009, Mechanical properties of Ti-Cr-Sn-Zr alloys, Bull. Niigata Inst. Technol, 14, 1

Kasano, 2010, Phase constitution and mechanical properties of Ti-(Cr, Mn)-Sn biomedical alloys, Mater. Sci. Forum, 654–656, 2118, 10.4028/www.scientific.net/MSF.654-656.2118

Zhang, L.C., and Yang, C. (2013). Titanium Alloys: Formation, Characteristics and Industrial Applications, Nova Science Publishers.

Nakai, 2011, Self-adjustment of Young’s modulus in biomedical titanium alloy during orthopaedic operation, Mater. Lett, 65, 688, 10.1016/j.matlet.2010.11.006

Hynowska, 2012, Nanostructured β-phase Ti-31.0Fe-9.0Sn and sub-μm structured Ti-39.3Nb-13.3Zr-10.7Ta alloys for biomedical applications: Microstructure benefits on the mechanical and corrosion performances, Mater. Sci. Eng. C, 32, 2418, 10.1016/j.msec.2012.07.016

Niinomi, 2012, Development of new metallic alloys for biomedical applications, Acta Biomater, 8, 3888, 10.1016/j.actbio.2012.06.037

Niinomi, 1999, Corrosion wear fracture of new beta type biomedical titanium alloys, Mater. Sci. Eng. A, 263, 193, 10.1016/S0921-5093(98)01167-8

Zhang, 2011, Manufacture by selective laser melting and mechanical behavior of a biomedical Ti-24Nb-4Zr-8Sn alloy, Scr. Mater, 65, 21, 10.1016/j.scriptamat.2011.03.024

Semlitsch, 1980, Properties of implant alloys for artificial hip joints, Med. Biol. Eng. Comput, 18, 511, 10.1007/BF02443329

Niinomi, 1998, Mechanical properties of biomedical titanium alloys, Mater. Sci. Eng. A, 243, 231, 10.1016/S0921-5093(97)00806-X

Boyer, B., Welsch, G., and Collings, E.W. (2007). Materials Properties Handbook: Titanium Alloys, ASM International.

Narayan, 2012, Materials for medical devices, fundamentals of medical implant materials, ASM Handb, 23, 6

Niinomi, 2011, Titanium-based biomaterials for preventing stress shielding between implant devices and bone, Int. J. Biomater, 2011, 1, 10.1155/2011/836587

Semiatin, 1998, Evolution of microstructure, macrotexture and microtexture during hot rolling of Ti-6Al-4V, Mater. Sci. Eng. A, 257, 118, 10.1016/S0921-5093(98)00829-6

1999, Property optimization through microstructural control in titanium and aluminum alloys, Mater. Sci. Eng. A, 263, 117, 10.1016/S0921-5093(98)01169-1

Tang, 2000, Phase transformation in Ti-Nb-Ta and Ti-Nb-Ta-Zr alloys, J. Mater. Sci, 35, 1805, 10.1023/A:1004792922155

Geetha, 2004, Effect of thermomechanical processing on evolution of various phases in Ti-Nb-Zr alloys, J. Alloy. Compd, 384, 131, 10.1016/j.jallcom.2004.04.113

Qazi, 2005, Phase transformations in Ti-35Nb-7Zr-5Ta-(0.06–0.68)O alloys, Mater. Sci. Eng. C, 25, 389, 10.1016/j.msec.2005.01.022

Matsumoto, 2005, Beta TiNbSn alloys with low young’s modulus and high strength, Mater. Trans, 46, 1070, 10.2320/matertrans.46.1070

Zhao, 2011, Microstructures and mechanical properties of metastable Ti-30Zr-(Cr, Mo) alloys with changeable Young’s modulus for spinal fixation applications, Acta Biomater, 7, 3230, 10.1016/j.actbio.2011.04.019

Gabriel, 2012, Characterization of a new beta titanium alloy, Ti-12Mo-3Nb, for biomedical applications, J. Alloy. Compd, 536, S208, 10.1016/j.jallcom.2011.11.035

Zhou, 2008, Microstructures and mechanical properties of Ti-50 mass% Ta alloy for biomedical applications, J. Alloy. Compd, 466, 535, 10.1016/j.jallcom.2007.11.090

Zhao, 2011, Development of high Zr-containing Ti-based alloys with low Young’s modulus for use in removable implants, Mater. Sci. Eng. C, 31, 1436, 10.1016/j.msec.2011.05.013

Xie, 2013, Nanocrystalline β-Ti alloy with high hardness, low Young’s modulus and excellent in vitro biocompatibility for biomedical applications, Mater. Sci. Eng. C, 33, 3530, 10.1016/j.msec.2013.04.044

Jung, 2013, Mechanical properties and microstructures of β Ti-25Nb-11Sn ternary alloy for biomedical applications, Mater. Sci. Eng. C, 33, 1629, 10.1016/j.msec.2012.12.072

Cao, 2011, Mechanical and electrochemical characterization of Ti-12Mo-5Zr alloy for biomedical application, J. Alloy. Compd, 509, 8235, 10.1016/j.jallcom.2011.05.090

Guo, 2013, Microstructural evolution and mechanical behavior of metastable β-type Ti-25Nb-2Mo-4Sn alloy with high strength and low modulus, Prog. Nat. Sci. Mater. Int, 23, 174, 10.1016/j.pnsc.2013.03.008

Teoh, 2000, Fatigue of biomaterials: A review, Int. J. Fatigue, 22, 825, 10.1016/S0142-1123(00)00052-9

Niinomi, 2010, Improvement of the fatigue life of titanium alloys for biomedical devices through microstructural control, Expert Rev. Med. Devices, 7, 481, 10.1586/erd.10.16

Rack, 2006, Titanium alloys for biomedical applications, Mater. Sci. Eng. C, 26, 1269, 10.1016/j.msec.2005.08.032

Lee, 2004, Quasi-static and dynamic deformation behavior of Ti-6Al-4V alloy containing fine α2-Ti3Al precipitates, Mater. Sci. Eng. A, 366, 25, 10.1016/j.msea.2003.08.061

Kuhlman, G.W. (1991). Microstructure/Property Relationships in Titanium Aluminides and Alloys, TMS.

He, 2006, Bimodal structured Ti-base alloy with large elasticity and low Young’s modulus, Mater. Sci. Eng. C, 26, 14, 10.1016/j.msec.2005.03.007

Hao, 2002, Young’s modulus and mechanical properties of Ti-29Nb-13Ta-4.6Zr in relation to α’’ martensite, Metall. Mater. Trans. A, 33, 3137, 10.1007/s11661-002-0299-7

(2004). Medical Device Materials, ASM.

Geetha, 2001, Effect of thermomechanical processing on microstructure of a Ti-13Nb-13Zr alloy, J. Alloy. Compd, 329, 214, 10.1016/S0925-8388(01)01604-8

Webster, 2004, Increased osteoblast adhesion on nanophase metals: Ti, Ti6Al4V, and CoCrMo, Biomaterials, 25, 4731, 10.1016/j.biomaterials.2003.12.002

Tane, 2008, Peculiar elastic behavior of Ti-Nb-Ta-Zr single crystals, Acta Mater, 56, 2856, 10.1016/j.actamat.2008.02.017

Cleason, T.A., and Pendleton, H.J.R. (Low Modulus Biocompatible Titanium Base Alloys for Medical Devices, 1999). Low Modulus Biocompatible Titanium Base Alloys for Medical Devices, U.S. Patent 5,871,595 A.

Ouchi, C. (1994). Mettalurgy and Technology of Practical Titanium Alloys, TMS.

Jablokov, 2005, Influence of oxygen content on the mechanical properties of Titanium-35Niobium-7Zirconium-5Tantalum beta titanium alloy, J. ASTM Int, 2, 1

Blenkinsop, 1996, A New Low Modulus, Biocompatible Titanium Alloy, Titanium’95: Science and Technology, 2, 1760

Lutjering, 2003, The Effect of Duplex Aging on the Tensile Behavior of Ti-35Nb-7Zr-5Ta-(0.06–0.7) O Alloys, Titanium 2003 Science and Technology, 1, 651

Lutjering, G., and Albrecht, J. (2004). Titanium 2003 Science and Technology, Wiley-VCH Verlag, GmbH and Co. KGaA.

Long, 1999, High-cycle fatigue performance of solution-treated metastable-β titanium alloys, Acta Mater, 47, 661, 10.1016/S1359-6454(98)00343-7

Ho, 1999, Structure and properties of cast binary Ti-Mo alloys, Biomaterials, 20, 2115, 10.1016/S0142-9612(99)00114-3

Oliveira, 2007, Development of Ti-Mo alloys for biomedical applications: Microstructure and electrochemical characterization, Mater. Sci. Eng. A, 452–453, 727, 10.1016/j.msea.2006.11.061

Oliveira, 2009, Electrochemical stability and corrosion resistance of Ti-Mo alloys for biomedical applications, Acta Biomater, 5, 399, 10.1016/j.actbio.2008.07.010

Oliveira, 2008, Electrochemical behavior of Ti-Mo alloys applied as biomaterial, Corros. Sci, 50, 938, 10.1016/j.corsci.2007.09.009

Capela, 2008, Repeatability of corrosion parameters for titanium-molybdenum alloys in 0.9% NaCl solution, J. Alloy. Compd, 465, 479, 10.1016/j.jallcom.2007.10.115

Alves, 2004, A study on corrosion resistance of the Ti-10Mo experimental alloy after different processing methods, Mater. Sci. Eng. A, 24, 693, 10.1016/j.msec.2004.08.013

Zhang, 2007, Ductile ultrafine-grained Ti-based alloys with high yield strength, Appl. Phys. Lett, 91, 051906:1

Kshang, 2008, The role of nanometer and sub-micron surface features on vascular and bone cell adhesion on titanium, Biomaterials, 29, 970, 10.1016/j.biomaterials.2007.11.009

Yao, C., Qazi, J.I., Rack, H.J., Slamovich, E.B., and Webster, T.J. (2004, January 18–21). Improved bone cell adhesion on ultrafine grained titanium and Ti-6Al-4V, Indianapolis, IN, USA.

Mitchell, 1998, Melting, casting and forging problems in titanium alloys, Mater. Sci. Eng. A, 243, 257, 10.1016/S0921-5093(97)00810-1

Kim, 2006, Martensitic transformation, shape memory effect and superelasticity of Ti-Nb binary alloys, Acta Mater, 54, 2419, 10.1016/j.actamat.2006.01.019

Miyazaki, 2006, Development and characterization of Ni-free Ti-base shape memory and superelastic alloys, Mater. Sci. Eng. A, 438–440, 18, 10.1016/j.msea.2006.02.054

Takahashi, 2002, Effect of heat treatment and Sn content on superelasticity in biocompatible TiNbSn alloys, Mater. Trans, 43, 2978, 10.2320/matertrans.43.2978

Zhang, 2005, Origin of pseudoelastic behavior in Ti-Mo-based alloys, Appl. Phys. Lett, 87, 241909:1, 10.1063/1.2142089

Li, 2008, Fatigue properties of a metastable β-type titanium alloy with reversible phase transformation, Acta Biomater, 4, 305, 10.1016/j.actbio.2007.09.009

Freyman, 2001, Cellular materials as porous scaffolds for tissue engineering, Prog. Mater. Sci, 46, 273, 10.1016/S0079-6425(00)00018-9

Wen, 2004, Compressibility of porous magnesium foam: Dependency on porosity and pore size, Mater. Lett, 58, 357, 10.1016/S0167-577X(03)00500-7

Manukyana, 2010, Novel NiZr-based porous biomaterials: Synthesis and in vitro testing, J. Chem. Eng, 162, 406, 10.1016/j.cej.2010.05.042

Lueck, 1969, Development of an open pore metallic implant to permit attachment to bone, Surg. Forum, 20, 456

Wang, 2009, Porous TiNbZr alloy scaffolds for biomedical applications, Acta Biomater, 5, 3616, 10.1016/j.actbio.2009.06.002

Zhao, 2009, Pore structures of high-porosity NiTi alloys made from elemental powders with NaCl temporary space-holders, Mater. Lett, 63, 2402, 10.1016/j.matlet.2009.07.069

Schroers, 2009, Bulk metallic glasses for biomedical applications, JOM, 61, 21, 10.1007/s11837-009-0128-1

Wen, 2001, Processing of biocompatible porous Ti and Mg, Scr. Mater, 45, 1147, 10.1016/S1359-6462(01)01132-0

Wen, 2006, Fabrication of novel TiZr alloy foams for biomedical applications, Mater. Sci. Eng. C, 26, 1439, 10.1016/j.msec.2005.08.006

Pompe, 2003, Functionally graded materials for biomedical applications, Mater. Sci. Eng. A, 362, 40, 10.1016/S0921-5093(03)00580-X

Menini, 2006, Surface and corrosion electrochemical characterization of titanium foams for implant applications, J. Electrochem. Soc, 153, B13, 10.1149/1.2128098

Gibson, L.J., and Ashby, M.F. (1997). Cellular Solids: Structure and Properties, Cambridge University Press.

Roberts, 2002, Elastic properties of model random three-dimensional open-cell solids, J. Mech. Phys. Solids, 50, 33, 10.1016/S0022-5096(01)00056-4

Bastawros, 2000, Experimental analysis of deformation mechanisms in a closed-cell aluminum alloy foam, J. Mech. Phys. Solids, 48, 301, 10.1016/S0022-5096(99)00035-6

Ford, 1998, Uniaxial strength asymmetry in cellular materials: An analytical model, Int. J. Mech. Sci, 40, 521, 10.1016/S0020-7403(97)00064-7

Roberts, 2001, Elastic moduli of model random three-dimensional closed-cell cellular solids, Acta Mater, 49, 189, 10.1016/S1359-6454(00)00314-1

Prakash, 1995, Structure and properties of Al-SiC foam, Mater. Sci. Eng. A, 199, 195, 10.1016/0921-5093(94)09708-9

Niu, 2010, A two-scale model for predicting elastic properties of porous titanium formed with space-holders, Comp. Mater. Sci, 50, 172, 10.1016/j.commatsci.2010.07.022

Jha, 2013, Highly porous open cell Ti-foam using NaCl as temporary space holder through powder metallurgy route, Mater.Des, 47, 810, 10.1016/j.matdes.2013.01.005

Roberts, 2000, Elastic properties of model porous ceramics, J. Am. Ceram. Soc, 83, 3041, 10.1111/j.1151-2916.2000.tb01680.x

Malinov, 2001, Differential scanning calorimetry study and computer modeling of phase transformation in a Ti-6Al-4V alloy, Metall. Mater. Trans. A, 32, 879, 10.1007/s11661-001-0345-x

Hollister, 2002, Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints, Biomaterials, 23, 4095, 10.1016/S0142-9612(02)00148-5

Fang, 2005, Computer-aided characterization for effective mechanical properties of porous tissue scaffolds, Comput. Aided Des, 37, 65, 10.1016/j.cad.2004.04.002

Esen, 2011, Characterization of Ti-6Al-4V alloy foams synthesized by space holder technique, Mater. Sci. Eng. A, 528, 3200, 10.1016/j.msea.2011.01.008

Esen, 2007, Processing of titanium foams using magnesium spacer particles, Scr. Mater, 56, 341, 10.1016/j.scriptamat.2006.11.010

Laptev, 2005, Green strength of powder compacts provided for production of highly porous titanium parts, Powder Metall, 48, 358, 10.1179/174329005X73838

Li, 2005, Microhardness of pore walls in porous titanium prepared with novel powder metallurgy, Powder Metall, 48, 237, 10.1179/174329005X64162

Saha, 2005, Effect of density, microstructure, and strain rate on compression behavior of polymeric foams, Mater. Sci. Eng. A, 406, 328, 10.1016/j.msea.2005.07.006

Raj, 2009, Structural and compressive property correlation of closed-cell aluminum foam, J. Alloy. Compd, 467, 550, 10.1016/j.jallcom.2007.12.040

Tuncer, 2011, Investigation of spacer size effect on architecture and mechanical properties of porous titanium, Mater. Sci. Eng. A, 530, 633, 10.1016/j.msea.2011.10.036

Stephani, 2009, New multifunctional lightweight materials based on cellular metals—Manufacturing, properties and applications, J. Phys. Conf. Ser, 165, 012061:1, 10.1088/1742-6596/165/1/012061

Jiang, 2006, Investigation on the micro-deformation characteristics of porous NiTi shape memory alloy using SEM moirè method, Acta Metall. Sin, 42, 1153

Li, 2009, Quantification of the interaction within defect populations on fatigue behavior in an aluminum alloy, Acta Mater, 57, 3539, 10.1016/j.actamat.2009.04.008

Spoerke, 2008, Titanium with aligned, elongated pores for orthopedic tissue engineering applications, Mater. Res, 84A, 402, 10.1002/jbm.a.31317

Shen, 2008, Effect of microstructural configurations on the mechanical responses of porous titanium: A numerical design of experiment analysis for orthopedic applications, Mech. Mater, 40, 708, 10.1016/j.mechmat.2008.03.009

Li, 2004, Effects of pore morphology and bone ingrowth on mechanical properties of microporous titanium as an orthopaedic implant material, Jpn. Mater. Trans, 45, 1124, 10.2320/matertrans.45.1124

Zou, 2008, Preparation, microstructure and mechanical properties of porous titanium sintered by Ti fibres, J. Mater. Sci. Mater. Med, 19, 401, 10.1007/s10856-006-0103-0

Li, 2012, Effect of microstructure on the tensile property of porous Ti produced by powder metallurgy technique, Mater. Sci. Eng. A, 534, 43, 10.1016/j.msea.2011.11.028

Li, 2013, Effect of pore structure on the compressive property of porous Ti produced by powder metallurgy technique, Mater. Des, 50, 613, 10.1016/j.matdes.2013.02.082

Xie, 2013, Structural characterization and electrochemical behavior of a laser-sintered porous Ti-10Mo alloy, Corros. Sci, 67, 217, 10.1016/j.corsci.2012.10.036

Otsuki, 2006, Pore throat size and connectivity determine bone and tissue ingrowth into porous implants: Three dimensional micro-CT based structural analyses of porous bioactive titanium implants, Biomaterials, 27, 5892, 10.1016/j.biomaterials.2006.08.013

Xue, 2007, Processing and biocompatibility evaluation of laser processed porous titanium, Acta Biomater, 3, 1007, 10.1016/j.actbio.2007.05.009

Chen, 2009, Fabrication of porous titanium implants with biomechanical compatibility, Mater. Lett, 63, 2659, 10.1016/j.matlet.2009.09.029

Hollander, 2006, Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming, Biomaterials, 27, 955, 10.1016/j.biomaterials.2005.07.041

Jia, 2007, Bone ingrowth in porous titanium implants produced by 3D fiber deposition, Biomaterials, 28, 2810, 10.1016/j.biomaterials.2007.02.020

Li, 2009, Space-holder engineered porous NiTi shape memory alloys with improved pore characteristics and mechanical properties, J. Alloy. Compd, 474, L1, 10.1016/j.jallcom.2008.06.043

Suchanek, 1998, Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants, J. Mater. Res, 13, 94, 10.1557/JMR.1998.0015

Nakai, 2010, Development of biomedical porous titanium filled with medical polymer by in situ polymerization of monomer solution infiltrated into pores, J. Mech. Behav. Biomed. Mater, 3, 41, 10.1016/j.jmbbm.2009.03.003

Niinomi, 2008, Mechanical biocompatibilities of titanium alloys for biomedical applications, J. Mech. Behav. Biomed. Mater, 1, 30, 10.1016/j.jmbbm.2007.07.001

Brailovski, 2013, Mechanical properties of porous metastable beta Ti-Nb-Zr alloys for biomedical applications, J. Alloy. Compd, 577, S414, 10.1016/j.jallcom.2011.12.157

Krishna, 2007, Low stiffness porous Ti structures for load-bearing implants, Acta Biomater, 3, 997, 10.1016/j.actbio.2007.03.008

Torres, 2011, Conventional powder metallurgy process and characterization of porous titanium for biomedical applications, Metall. Mater. Trans. B, 42B, 891, 10.1007/s11663-011-9521-6

Hsu, 2013, Design and characterization of highly porous titanium foams with bioactive surface sintering in air, J. Alloy. Compd, 575, 326, 10.1016/j.jallcom.2013.05.186

Zhang, 2010, Spark plasma sintering, microstructures, and mechanical properties of macroporous titanium foams, Adv. Eng. Mater, 12, 863, 10.1002/adem.201000106

Grana, 2012, Zr-Ti-Nb porous alloys for biomedical application, Mater. Sci. Eng. C, 32, 321, 10.1016/j.msec.2011.10.035

Nomura, 2005, Effect of nitrogen on mechanical properties of porous titanium compacts prepared by powder sintering, Mater. Sci. Forum, 2313, 475

Banhart, 2001, Manufacture, characterization and application of cellular metals and metal foams, Prog. Mater. Sci, 46, 559, 10.1016/S0079-6425(00)00002-5

Banhart, J., Ashby, M.F., and Fleck, N.A. (1999, January 14–16). Metal Foams and Foam Metal Structures.

Dunand, 2004, Processing of titanium foams, Adv. Eng. Mater, 6, 369, 10.1002/adem.200405576

Angelo, P.C., and Subramanian, R. (2009). Powder Metallurgy: Science, Technology and Applications, Eastern Economy, PHI.

Arzt, 1983, Practical applications of hot-lsostatic pressing diagrams: Four case studies, Metall. Trans. A, 14, 211, 10.1007/BF02651618

Ryan, 2006, Fabrication methods of porous metals for use in orthopaedic applications, Biomaterials, 27, 2651, 10.1016/j.biomaterials.2005.12.002

Taylor, 1993, Initial stage hot pressing of monosized Ti and 90% Ti-10% TiC powders, Acta Metall. Mater, 41, 955, 10.1016/0956-7151(93)90030-V

Niu, 2009, Processing and properties of porous titanium using space holder technique, Mater. Sci. Eng. A, 506, 148, 10.1016/j.msea.2008.11.022

Li, 2009, Powder sintering of porous Ti-15Mo alloy from TiH2 and Mo powders, J. Alloy. Compd, 485, 215, 10.1016/j.jallcom.2009.06.003

Bernard, 2006, Porous single-phase NiTi processed under Ca reducing vapor for use as a bone graft substitute, Biomaterials, 27, 1246, 10.1016/j.biomaterials.2005.09.014

Mansourighasri, 2012, Processing titanium foams using tapioca starch as a space holder, J. Mater. Process. Technol, 212, 83, 10.1016/j.jmatprotec.2011.08.008

Bansiddhi, 2008, Shape-mempry NiTi foams produced by replication of NaCl space-holders, Acta Biomater, 4, 1996, 10.1016/j.actbio.2008.06.005

Jee, 2000, Preparation of high porosity metal foams, Metall. Mater. Trans. B, 31, 1345, 10.1007/s11663-000-0021-3

Aydogmus, 2009, Processing of porous TiNi alloys using magnesium as space holder, J. Alloy. Compd, 478, 705, 10.1016/j.jallcom.2008.11.141

Josephajr, G. (Porous Metal Articles Having a Predetermined Pore Character, 2006). Porous Metal Articles Having a Predetermined Pore Character, U.S. Patent 2,006,002,810 A1.

Patnaik, P. (2003). Handbook of Inorganic Chemicals, McGraw-Hill.

Köhl, M., Bram, M., Buchkremer, H.-P., Stöver, D., Habijan, T., and Köller, M. (2008). Production of Highly Porous Near-net-shape Niti Components for Biomedical Applications, DEStech Publications Inc.

Zhao, 2001, A novel sintering-dissolution process for manufacturing Al foams, Scr. Mater, 44, 105, 10.1016/S1359-6462(00)00548-0

Torres, 2012, Processing and characterization of porous titanium for implants by using NaCl as space holder, J. Mater. Process. Technol, 212, 1061, 10.1016/j.jmatprotec.2011.12.015

Sevilla, 2008, Mechanical properties of nickel-titanium foams for reconstructive orthopaedics, Mater. Sci. Eng. A, 28, 23, 10.1016/j.msec.2007.02.001

Carvalho, 2008, Porous titanium scaffolds produced by powder metallurgy for biomedical applications, Mater. Res, 11, 275, 10.1590/S1516-14392008000300008

Bram, 2000, High-porosity titanium, stainless steel and superalloy parts, Adv. Eng. Mater, 2, 196, 10.1002/(SICI)1527-2648(200004)2:4<196::AID-ADEM196>3.0.CO;2-K

Gao, 2012, Mechanical modulation and bioactive surface modification of porous Ti-10Mo alloy for bone implants, Mater. Des, 42, 13, 10.1016/j.matdes.2012.05.041

Bor, 2012, Superelasticity and compression behavior of porous TiNi alloys produced using Mg spacers, J. Mech. Behav. Biomed. Mater, 15, 59, 10.1016/j.jmbbm.2012.05.018

Li, 2002, Preparation and characterization of porous titanium, Key Eng. Mater, 218–220, 51, 10.1016/S0921-5093(01)01848-2

Asaoka, 1985, Mechanical properties and biomechanical compatibility of porous titanium for dental implants, J. Biomed. Mater. Res, 19, 699, 10.1002/jbm.820190609

Miyao, 2000, Fabrication of functionally graded implants by spark plasma sintering and their properties, J. Jpn. Soc. Powder Metall, 47, 1239, 10.2497/jjspm.47.1239

Watari, 2002, Effect of spark plasma sintering pressure on the properties of functionally graded implant and its biocompatibility, J. Jpn. Soc. Powder Metall, 49, 1063, 10.2497/jjspm.49.1063

Zou, 2004, Bone ingrowth characteristics of porous tantalum and carbon fiber interbody devices: An experimental study in pigs, Spine J, 4, 99, 10.1016/S1529-9430(03)00407-8

Ibrahim, 2011, Processing of porous Ti and Ti5Mn foams by spark plasma sintering, Mater. Des, 32, 146, 10.1016/j.matdes.2010.06.019

Schneider, 1996, Plasma activated sintering of ceramic materials, Ceram. Trans, 79, 143

Lifland, 1994, Properties of titanium dental implants produced by electro-discharge compaction, Clin. Mater, 17, 203, 10.1016/0267-6605(94)90037-X

Kon, 2004, Porous Ti-6Al-4V alloy fabricated by spark plasma sintering for biomimetic surface modification, J. Biomed. Mater. Res. B, 68, 88, 10.1002/jbm.b.20004

Sakamoto, 2006, Chemical surface modification of high-strength porous Ti compacts by spark plasma sintering, Biomed. Mater. Eng, 16, 83

Nicula, 2007, Spark plasma sintering synthesis of porous nanocrystalline titanium alloys for biomedical applications, Biomol. Eng, 24, 564, 10.1016/j.bioeng.2007.08.008

Oh, 2007, Mechanical properties and biocompatibility of porous titanium prepared by powder sintering, Mater. Sci. Forum, 539–543, 635, 10.4028/www.scientific.net/MSF.539-543.635

Zadra, 2008, Microstructure and mechanical properties of cp-titanium produced by spark plasma sintering, Powder Metall, 51, 59, 10.1179/174329008X277000

Qiu, 1997, Composite titanium dental implant fabricated by electro-discharge compaction, Biomaterials, 18, 153, 10.1016/S0142-9612(96)00097-X

Munir, 2006, The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method, J. Mater. Sci, 41, 763, 10.1007/s10853-006-6555-2

Kutty, 2004, Gradient surface porosity in titanium dental implants: Relation between processing parameters and microstructure, J. Mater. Sci. Mater. Med, 15, 145, 10.1023/B:JMSM.0000011815.50383.bd

Saitou, 2006, Microwave sintering of iron, cobalt, nickel, copper and stainless steel powders, Scr. Mater, 54, 875, 10.1016/j.scriptamat.2005.11.006

Upadhyaya, 2007, Microwave sintering of W-Ni-Fe alloy, Scr. Mater, 56, 5, 10.1016/j.scriptamat.2006.09.010

Thakur, 2007, Microwave synthesis and characterization of metastable (Al/Ti) and hybrid (Al/Ti + SiC) composites, Mater. Sci. Eng. A, 452–453, 61, 10.1016/j.msea.2006.10.156

Tang, 2013, In situ formation of Ti alloy/TiC porous composites by rapid microwave sintering of Ti6Al4V/MWCNTs powder, J. Alloy. Compd, 557, 67, 10.1016/j.jallcom.2012.12.147

Liu, 2006, Design of powder metallurgy titanium alloys and composites, Mater. Sci. Eng. A, 418, 25, 10.1016/j.msea.2005.10.057

Oghbaei, 2010, Microwave vs. conventional sintering: A review of fundamentals, advantages and applications, J. Alloy. Compd, 494, 175, 10.1016/j.jallcom.2010.01.068

Zhang, 2001, Combustion synthesis of porous materials for bone replacement, Biomed. Sci. Instrum, 37, 463

Li, 2000, Synthesis of porous Ni-Ti shape-memory alloys by self-propagating high-temperature synthesis: Reaction mechanism and anisotropy in pore structure, Acta Mater, 48, 3895, 10.1016/S1359-6454(00)00184-1

Yea, 2004, Synthesis of NiTi intermetallics by selfpropagating combustion, J. Alloy. Compd, 376, 79, 10.1016/j.jallcom.2003.12.016

Chu, 2004, Fabrication of porous NiTi shape memory alloy for hard tissue implants by combustion synthesis, Mater. Sci. Eng. A, 366, 114, 10.1016/j.msea.2003.08.118

Chung, 2004, Porous TiNi shape memory alloy with high strength fabricated by self-propagating high-temperature synthesis, Mater. Lett, 58, 1683, 10.1016/j.matlet.2003.10.045

Biswas, 2005, Porous NiTi by thermal explosion mode of SHS: Processing, mechanism and generation of single phase microstructure, Acta Mater, 53, 1415, 10.1016/j.actamat.2004.11.036

Yuan, 2004, Microstructure and martensitic transformation behavior of porous NiTi shape memory alloy prepared by hot isostatic pressing processing, Mater. Sci. Eng. A, 382, 182, 10.1016/j.msea.2004.04.068

Yuan, 2006, A comparative study of the porous TiNi shape-memory alloys fabricated by three different processes, Metall. Mater. Trans. A, 37, 755, 10.1007/s11661-006-0047-5

Li, 1998, Anisotropy of dimensional change and its corresponding improvement by addition of TiH2 during elemental powder sintering of porous NiTi alloy, Mater. Sci. Eng. A, 255, 70, 10.1016/S0921-5093(98)00780-1

Li, 2000, A recent development in producing porous NiTi shape memory alloys, Intermetallics, 8, 881, 10.1016/S0966-9795(00)00024-8

Arakawa, 2012, Effect of elemental powder size on foaming behavior of NiTi alloy made by combustion synthesis, Materials, 5, 1267, 10.3390/ma5071267

Arakawa, 2011, Effect of foaming agent and endothermic agent addition on foaming behavior of NiTi alloy made by combustion synthesis, J. Jpn. Inst. Met, 75, 379, 10.2320/jinstmet.75.379

Chen, 2009, Porous titanium implants fabricated by metal injection molding, Trans. Nonferr. Met. Soc. China, 19, 1174, 10.1016/S1003-6326(08)60424-0

Nihouannen, 2005, Ectopic bone formation by microporous calcium phosphate ceramic particles in sheep muscles, Bone, 36, 1086, 10.1016/j.bone.2005.02.017

Li, 2001, Pore characteristics of porous NiTi alloy fabricated by combustion synthesis, J. Alloy. Compd, 325, 259, 10.1016/S0925-8388(01)01382-2

Zhang, 2007, High porosity and large pore size shape memory alloys fabricated by using pore-forming agent (NH4HCO3) and capsule-free hot isostatic pressing, J. Mater. Process. Technol, 192–193, 439, 10.1016/j.jmatprotec.2007.04.069

Nugroho, 2010, Processing of a porous titanium alloy from elemental powders using a solid state isothermal foaming technique, J. Mater. Sci. Mater. Med, 21, 3103, 10.1007/s10856-010-4162-x

Wegst, 2010, Biomaterials by freeze casting, Philos. Trans. R. Soc. A, 368, 2099, 10.1098/rsta.2010.0014

Li, 2011, Mechanical properties of directionally freeze-cast titanium foams, Acta Mater, 59, 146, 10.1016/j.actamat.2010.09.019

Yoon, 2008, Aligned porous alumina ceramics with high compressive strengths for bone tissue engineering, Scr. Mater, 58, 37, 10.1016/j.scriptamat.2007.11.006

Yook, 2009, Fabrication of porous titanium scaffolds with high compressive strength using camphene-based freeze casting, Mater. Lett, 63, 1502, 10.1016/j.matlet.2009.03.056

Jung, 2013, Dynamic freeze casting for the production of porous titanium (Ti) scaffolds, Mater. Sci. Eng. C, 33, 59, 10.1016/j.msec.2012.08.004

Chino, 2008, Directionally freeze-cast titanium foam with aligned, elongated pores, Acta Mater, 56, 105, 10.1016/j.actamat.2007.09.002

Soon, 2011, Assembling unidirectionally frozen alumina/camphene bodies for aligned porous alumina ceramics with larger dimensions, J. Eur. Ceram. Soc, 31, 415, 10.1016/j.jeurceramsoc.2010.09.019

Cachinho, 2007, Titanium porous scaffolds from precursor powders: Rheological optimization of TiH2 slurries, Powder Technol, 178, 109, 10.1016/j.powtec.2007.04.014

Liu, 2011, Oriented bioactive glass (13–93) scaffolds with controllable pore size by unidirectional freezing of camphene-based suspensions: Microstructure and mechanical response, Acta Biomater, 7, 406, 10.1016/j.actbio.2010.08.025

Yook, 2012, Reverse freeze casting: A new method for fabricating highly porous titanium scaffolds with aligned large pores, Acta Biomater, 8, 2401, 10.1016/j.actbio.2012.03.020

Rak, 2006, Porous titanium foil by tape casting technique, J. Mater. Process. Technol, 175, 358, 10.1016/j.jmatprotec.2005.04.066

Neirinck, 2009, Preparation of titanium foams by slip casting of particle stabilized emulsions, Adv. Eng. Mater, 11, 633, 10.1002/adem.200900074

Asthana, R., Kumar, A., and Dahotre, N.B. (2006). Materials Processing and Manufacturing Science, Elsevier Academic Press.

Nieto, 2001, Aqueous colloidal processing of nickel powder, Acta Mater, 49, 645, 10.1016/S1359-6454(00)00347-5

Xu, 2012, Optimisation of performance of dispersants in aqueous titanium slips, Key Eng. Mater, 520, 330, 10.4028/www.scientific.net/KEM.520.330

Gillissen, 2000, Gelcasting, a near net shape technique, Mater. Des, 21, 251, 10.1016/S0261-3069(99)00075-8

Erk, 2008, Titanium with controllable pore fractions by thermoreversible gelcasting of TiH2, Acta Mater, 56, 5147, 10.1016/j.actamat.2008.06.035

Yang, 2012, Mechanical properties of porous Ti-Mo and Ti-Nb alloys for biomedical application by gelcasting, Procedia Eng, 36, 160, 10.1016/j.proeng.2012.03.025

Yang, 2011, Preparation and properties of biomedical porous titanium alloys by gelcasting, Biomed. Mater, 6, 045010:1, 10.1088/1748-6041/6/4/045010

Woodfield, 2004, Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique, Biomaterials, 25, 4149, 10.1016/j.biomaterials.2003.10.056

Yang, 2002, The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques, Tissue Eng, 8, 1, 10.1089/107632702753503009

Li, 2006, Fabrication and characterization of bioactive porous titanium, Rare Met. Mater. Eng, 35, 154

Hench, 1991, Bioceramics: From concept to clinic, J. Am. Ceram. Soc, 74, 1487, 10.1111/j.1151-2916.1991.tb07132.x

Salito, A., van Osten, K.U., and Breme, F. (1998). Gentle coating technique. Sulzer Tech. Rev, 34–37.

Tan, 2009, Mechanical behaviors of quasi-ordered entangled aluminum alloy wire material, Mater. Sci. Eng. A, 527, 38, 10.1016/j.msea.2009.07.022

Liu, 2009, Uniaxial tensile stress-strain behavior of entangled steel wire material, Mater. Sci. Eng. A, 509, 69, 10.1016/j.msea.2009.01.014

Ducheyne, 1974, Skeletal fixation by metal fiber coating of the implant, Acta Orthop. Belg, 40, 799

Lee, 2010, Improving the strength and biocompatibility of porous titanium scaffolds by creating elongated pores coated with a bioactive, nanoporous TiO2 layer, Mater. Lett, 64, 2526, 10.1016/j.matlet.2010.08.038

Li, 2003, Improvement of porous titanium with thicker struts, Key Eng. Mater, 240, 547, 10.4028/www.scientific.net/KEM.240-242.547

Balla, 2010, Porous tantalum structures for bone implants: Fabrication, mechanical and vitro biological properties, Acta Biomater, 6, 3349, 10.1016/j.actbio.2010.01.046

Singh, 2010, Titanium foams for biomedical applications: A review, Mater. Technol, 25, 127, 10.1179/175355510X12744412709403

Imwinkelried, 2007, Mechanical properties of open-pore titanium pore, J. Biomed. Mater. Res, 81A, 964, 10.1002/jbm.a.31118

Kato, 2013, Novel multilayer Ti foam with cortical bone strength and cytocompatibility, Acta Biomater, 9, 5802, 10.1016/j.actbio.2012.11.018

Yeong, 2004, Rapid prototyping in tissue engineering: Challenges and potential, Trends Biotechnol, 22, 643, 10.1016/j.tibtech.2004.10.004

Hutmacher, 2004, Scaffold-based tissue engineering: Rationale for computer-aided design and solid free-form fabrication systems, Trends Biotechnol, 22, 354, 10.1016/j.tibtech.2004.05.005

Sachlos, 2003, Novel collagen scaffolds with predefined internal morphology made by solid freeform fabrication, Biomaterials, 24, 1487, 10.1016/S0142-9612(02)00528-8

Sun, 2004, Computer-aided tissue engineering: Overview, scope and challenges, Biotechnol. Appl. Biochem, 39, 29, 10.1042/BA20030108

Wilson, 2004, Design and fabrication of standardized hydroxyapatite scaffolds with a defined macro-architecture by rapid prototyping for bone—Tissue-engineering research, J. Biomed. Mater. Res. A, 68, 123, 10.1002/jbm.a.20015

Curodeau, 2000, Design and fabrication of cast orthopedic implants with freeform surface textures from 3-D printed ceramic shell, J. Biomed. Mater. Res, 53, 525, 10.1002/1097-4636(200009)53:5<525::AID-JBM12>3.0.CO;2-1

Sachlos, 2003, Making tissue engineering scaffolds work. Review: The application of solid freeform fabrication technology to the production of tissue engineering scaffolds, Eur. Cell Mater, 5, 29, 10.22203/eCM.v005a03

Mazumder, 2005, Fabrication of 3D components by laser-aided direct metal deposition, Proc. SPIE, 5706, 38, 10.1117/12.601652

Traini, 2008, Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants, Dent. Mater, 24, 1525, 10.1016/j.dental.2008.03.029

Garrett, 2008, Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique, Biomaterials, 29, 3625, 10.1016/j.biomaterials.2008.05.032

Kumar, 2003, Selective laser sintering: A qualitative and objective approach, JOM, 55, 43, 10.1007/s11837-003-0175-y

Eosoly, 2010, Selective laser sintering of hydroxyapatite/poly-e-caprolactone scaffolds, Acta Biomater, 6, 2511, 10.1016/j.actbio.2009.07.018

Savalani, 2012, The effects and interactions of fabrication parameters on the properties of selective laser sintered hydroxyapatite polyamide composite biomaterials, Rapid Prototyp. J, 18, 16, 10.1108/13552541211193467

Shishkovsky, 2010, Porous titanium and nitinol implants synthesized by SHS/SLS: Microstructural and histomorphological analyses of tissue reactions, Int. J. Selfpropag. High Temp. Synth, 19, 157, 10.3103/S1061386210020123

Wu, 2003, Near net shape manufacturing of components using direct laser fabrication technology, J. Mater. Proc. Technol, 135, 266, 10.1016/S0924-0136(02)00906-8

Schwendner, 2001, Direct laser deposition of alloys from elemental powder blends, Scr. Mater, 45, 1123, 10.1016/S1359-6462(01)01107-1

Liu, 2003, Fabrication of functionally graded TiC/Ti composites by laser engineered net shaping, Scr. Mater, 48, 1337, 10.1016/S1359-6462(03)00020-4

Banerjee, 2003, Microstructural evolution in laser deposited compositionally graded α/β titanium-vanadium alloys, Acta Mater, 51, 3277, 10.1016/S1359-6454(03)00158-7

Dutta, 2005, Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel, Appl. Surf. Sci, 247, 320, 10.1016/j.apsusc.2005.01.039

Bandyopadhyay, 2010, Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants, Acta Biomater, 6, 1640, 10.1016/j.actbio.2009.11.011

Zhao, 2008, Macroporous Ti-based composite scaffold prepared by polymer impregnating method with calcium phosphate coatings, Mater. Lett, 62, 2921, 10.1016/j.matlet.2008.01.075

Mullen, 2008, Selective laser melting: A regular unit cell approach for the manufacture of porous, titanium, bone ingrowth constructs, suitable for orthopedic applications, J. Biomed. Mater. Res. B Appl. Biomater, 89B, 325, 10.1002/jbm.b.31219

Rydevik, 2001, Osseointegration in skeletal reconstruction and rehabilitation: A review, J. Rehabil. Res. Dev, 38, 175

Otani, 1992, Failure of cementless fixation of the femoral component in total hip arthroplasty, Orthop. Clin. North Am, 23, 335, 10.1016/S0030-5898(20)31743-0