Mitigation of tracheobronchomalacia with 3D-printed personalized medical devices in pediatric patients

American Association for the Advancement of Science (AAAS) - Tập 7 Số 285 - 2015
R. J. Morrison1, Scott J. Hollister2, Matthew Niedner3, Maryam Ghadimi Mahani4, Albert H. Park5, Deepak Mehta6, Richard G. Ohye7, Glenn E. Green8
1Department of Otolaryngology - Head and Neck Surgery, University of Michigan, Ann Arbor, MI 48109, USA.
2Department of Biomedical Engineering, University of Michigan, Ann Arbor, MI 48109, USA.
3Department of Pediatrics, Division of Critical Care Medicine, University of Michigan, Ann Arbor, MI 48109, USA.
4Department of Radiology, University of Michigan, Ann Arbor, MI 48109, USA#TAB#
5Division of Otolaryngology-Head and Neck Surgery, Department of Surgery, University of Utah, Salt Lake City, UT 84132, USA.
6Department of Pediatric Otolaryngology, Children’s Hospital of Pittsburgh of University of Pittsburgh Medical Center, Pittsburgh, PA 15224, USA.
7Department of Cardiac Surgery, University of Michigan, Ann Arbor, MI 48109, USA
8Department of Otolaryngology-Head and Neck Surgery, Division of Pediatric Otolaryngology, University of Michigan, Ann Arbor, MI 48109, USA.

Tóm tắt

Patient-specific, image-based design coupled with 3D biomaterial printing produced personalized implants for treatment of collapsed airways in patients with tracheobronchomalacia.

Từ khóa


Tài liệu tham khảo

10.1021/ac403397r

10.1108/13552541211231563

10.1016/j.wneu.2013.07.009

10.1109/MPUL.2013.2279617

10.1111/aor.12310

10.1002/ad.1710

10.1111/j.1440-1843.2006.00862.x

10.1378/chest.128.5.3391

Goyal V., Masters I. B., Chang B., Interventions for primary (intrinsic) tracheomalacia in children. Cochrane Database Syst. Rev. 10, CD005304 (2012).

10.1097/00005537-200111000-00010

10.1136/adc.2009.180836

10.1542/peds.2012-1943

10.1016/j.jpedsurg.2005.03.002

U.S. Department of Health and Human Services FDA public health notification: Complications from metallic tracheal stents in patients with benign airway disorders. http://www.fda.gov/MedicalDevices/Safety/AlertsandNotices/PublicHealthNotifications/ucm062115.htm issued 29 July 2005 [accessed 2 January 2015].

J. B. Haldane J. M. Smith in On Being the Right Size and Other Essays (Oxford Press New York 1985).

10.1001/jamaoto.2013.5644

10.1056/NEJMc1206319

C. L. Flanagan W.-J. Tseng C.-Y. Lin D. Suárez-González W. L. Murphy et al . “In vivo degradation of a novel poly(ε-caprolactone) invertebral cage for anterior cervical discectomy and fusion in a porcine model ” paper presented at the Tissue Engineering and Regenerative Medicine International Society (TERMIS) EU Meeting Galway Ireland 13 to 17 June 2010.

10.1111/j.1365-2273.1981.tb01792.x

10.1111/j.1399-3089.2009.00532.x

10.1203/00006450-198103000-00014

10.1016/j.biomaterials.2005.09.019

10.1097/01.prs.0000436844.92623.d3

10.1136/bjophthalmol-2013-304446

10.1097/01.prs.0000436523.79293.64

10.1331/JAPhA.2013.12217

Wren K., Science and society. Experts warn against bans on 3D printing. Science 342, 439 (2013).

10.1089/ten.tec.2012.0383

10.4161/org.20173

10.1007/s11548-010-0476-x

10.1016/j.athoracsur.2003.07.049

10.1016/j.athoracsur.2012.04.133

10.1016/j.jtcvs.2005.08.006

U.S. Department of Health and Human Services Additive manufacturing of medical devices: An interactive discussion on the technical considerations of 3D printing; public workshop. http://www.fda.gov/MedicalDevices/NewsEvents/WorkshopsConferences/ucm397324.htm. 8 to 9 October 2014.

10.1038/nbt.2958

Investigational Device Exemptions Code of Federal Regulations title 21 vol. 8 part 812 subpart B Section 812.36 revised 1 April 2014 [accessed 30 October 2014].

10.1007/s10439-015-1270-2

10.1016/j.biomaterials.2004.11.057

10.1115/1.2162589

10.1002/rcs.143

U.S. Department of Health and Human Services Guidance for industry and Food and Drug Administration staff: Non-clinical engineering tests and recommended labeling for intravasular stents and associated delivery systems www.fda.gov/downloads/MedicalDevices/DeviceRegulationandGuidance/GuidanceDocuments/ucm071986.pdf issued 18 April 2010 [accessed 1 October 2014].

ASTM Standard F2606-08 Standard guide for three-point bending of balloon expandable vascular stents and stent systems (ASTM International West Conshohocken PA 2014).

Thông tin
Thông tin xuất bản

American Association for the Advancement of Science (AAAS)

Tập 7 Số 285

Thông tin tác giả