Measurement of thermal conductivity of polymer melts by the line‐source method

Polymer Engineering and Science - Tập 30 Số 2 - Trang 65-70 - 1990
Hubert Lobo1, Claude Cohen1
1School of Chemical Engineering, Cornell University, Ithaca, New York 14850

Tóm tắt

AbstractAn apparatus has been developed for the measurement of thermal conductivity of polymer melts. Based on the transient “line source method,” it is ideally suited to these materials because measurements can be made quickly, before the onset of thermal degradation. Also, little or no sample preparation is required. A number of commercial polymers have been tested, including some glass‐fiber filled composites.

Từ khóa


Tài liệu tham khảo

Underwood W. M., 1960, Heat Transfer (Storrs), 261

Van der Held E. F. M., 1949, Physica, 15, 309

10.1088/0370-1298/64/12/110

10.1063/1.1721592

10.1139/p56-048

10.1016/B978-0-12-395737-5.50049-4

D'Eustachio D., 1952, Trans. Am. Soc. Heat. Vent. Engrs., 58, 331

Hooper F. C., 1950, Trans. Am. Soc. Heat. Vent. Engrs., 56, 309

Sweat V. E., 1974, Trans. ASAE., 56

Ingersoll L. R., 1948, Heat Conduction, 117

Carslaw H. S., 1960, Conduction of Heat in Solids, 261

Vos B. H., 1955, Applied Scientific Research, 5, 425, 10.1007/BF03184603

10.1002/app.1987.070330615

Himont Co. Inc. “Polypropylene (PRO‐FAX 63‐67XX) Property Data Sheets.”

Eiermann K., 1961, Kunststoffe, 51, 512

Knappe W., 1961, Kunststoffe, 51, 707

Hansen D., 1965, J. Polym. Sci., 3, 659

R. C. M.Wynter MS thesis McGill University (1978).

10.1002/pol.1964.110020301

H.Lobo unpublished results.

10.1021/i160049a004

Thông tin
Thông tin xuất bản

Polymer Engineering and Science

Tập 30 Số 2

65-70

Thông tin tác giả