Mathematical Modeling and Simulation of Microwave Thawing of Large Solid Foods Under Different Operating Conditions

Ahmed, J., & Ramaswamy, H. S. (2007). Microwave pasteurization and sterilization of foods. In M. S. Rahman (Ed.), Handbook of food preservation (2nd ed., pp. 691–711). USA: CRC.

Ayappa, K. G. (1997). Modelling transport processes during microwave heating: A review. Reviews in Chemical Engineering, 13(2), 1–67.

Ayappa, K. G., Davis, H. T., Crapiste, G., Davis, E. A., & Gordon, J. (1991). Microwave heating: An evaluation of power formulations. Chemical Engineering Science, 46(4), 1005–1016.

Barringer, S. A., Davis, E. A., Gordon, J., Ayappa, K. G., & Davis, H. T. (1994). Effect of sample size on the microwave heating rate: Oil vs water. American Institute of Chemical Engineering Journal, 40, 1433–1439.

Basak, T., & Ayappa, K. G. (2002). Role of length scales on microwave thawing dynamics in 2D cylinders. International Journal of Heat and Mass Transfer, 45, 4543–4559.

Bird, R. B., Stewart, W. E., & Lightfoot, E. N. (1976). Transport phenomena. New York: Wiley.

Burfoot, D., Railton, C. J., Foster, A. M., & Reavell, S. R. (1996). Modelling the pasteurisation of prepared meals with microwaves at 896 MHz. Journal of Food Engineering, 30, 117–133.

Campañone, L. A. (2001). Transferencia de calor y materia en congelación y almacenamiento de alimentos, sublimación de hielo, calidad, optimización de condiciones de proceso. Ph.D. Thesis, Facultad de Ingenieria, Universidad Nacional de La Plata, Argentina.

Campañone, L. A., & Zaritzky, N. E. (2005). Mathematical analysis of microwave heating process. Journal of Food Engineering, 69, 359–368.

Chamchong, M., & Datta, A. K. (1999). Thawing of foods in a microwave oven: I. Effect of power levels and power cycling. Journal of Microwave Power and Electromagnetic Energy, 34(1), 9–21.

Cha-um, W., Rattanadecho, P., & Pakdee, W. (2009). Experimental and numerical analysis of microwave heating of water and oil using a rectangular wave guide: Influence of sample sizes, positions, and microwave power. Food Bioprocess Technology. doi: 10.1007/s11947-009-0187 .

Cleland, D. J., & Cleland, A. C. (1991). An alternating direction, implicit finite difference scheme for heat conduction with phase change in finite cylinders. In: Proceedings of the XVIII International Congress of Refrigeration, Montreal, 356 pp.

Cleland, A. C., & Earle, R. L. (1979). Prediction of freezing times for foods in rectangular packages. Journal of Food Science, 44, 964–970.

Curet, S., Rouaud, O., & Boillereaux, L. (2007). Microwave tempering and heating in a single-mode cavity: Numerical and experimental investigations. Chemical Engineering and Processing, 47, 9–10.

Datta, A. K., & Anantheswaran, R. C. (2001). Handbook of microwave technology for food applications. USA: Marcel Dekker.

Geedipalli, S. S. R., Rakesh, V., & Datta, A. K. (2007). Modeling the heating uniformity contributed by a rotating turntable in microwave ovens. Journal of Food Engineering, 82, 359–368.

Gunasekaran, N. (2002). Effect of fat content and food type on heat transfer during microwave heating. M.S. Thesis, Virginia Polytechnic Institute and State University, Virginia, USA.

Gunasekaran, S., & Yang, H. (2007). Effect of experimental parameters on temperature distribution during continuous and pulsed microwave heating. Journal of Food Engineering, 78(4), 1452–1456.

Hui, Y. H. (2006). Handbook of food science, technology and engineering. USA: CRC.

Houška, M. (1997). Meat, meat products and semiproducts. Thermophysical and rheological properties of foods. Prague: Food Research Institute Prague.

Jeong, J. Y., Lee, S. E., Choi, J. H., Lee, J. Y., Kim, J. M., Min, S. G., et al. (2007). Variability in temperature distribution and cooking properties of ground pork patties containing different fat level and with/without salt cooked by microwave energy. Meat Science, 75(3), 415–422.

Lee, M. Z. C., & Marchant, T. R. (1999). Microwave thawing of slabs. Applied Mathematical Modelling, 23, 363–383.

Lin, Y. E., Anantheswaran, R. C., & Puri, V. M. (1995). Finite element analysis of microwave heating of solid foods. Journal of Food Engineering, 25, 85–112.

Lin, T. M., Durance, T. D., & Scaman, C. H. (1998). Characterization of vacuum microwave, air and freeze dried carrot slices. Food Research International, 31(2), 111–117.

Liu, C. M., Wang, Q. Z., & Sakai, N. (2005). Power and temperature distribution during microwave thawing, simulated by using Maxwell’s equations and Lambert’s law. International Journal of Food Science and Technology, 40, 9–21.

Mudgett, R. E. (1982). Electrical properties of foods in microwave processing. Food Technology, 36, 109–115.

Ni, H., & Datta, A. K. (2002). Moisture as related to heating uniformity in microwave processing of solids foods. Journal of Food Process Engineering, 22, 367–382.

Oliveira, M. E. C., & Franca, A. S. (2002). Microwave heating of foodstuffs. Journal of Food Engineering, 53, 347–359.

Pace, W. E., Wetsphal, W. B., & Goldblith, S. A. (1968). Dielectric properties of commercial cooking oils. Journal of Food Science, 33, 30–33.

Pangrle, B. J., Ayappa, K. G., Davis, H. T., Davis, E. A., & Gordon, J. (1991). Microwave thawing of cylinders. AIChE Journal, 37(12), 1789–1800.

Rattanadecho, P. (2004). Theoretical and experimental investigation of microwave thawing of frozen layer using a microwave oven (effects of layered configurations and layer thickness). International Journal of Heat and Mass Transfer, 47, 937–945.

Sakiyan, O., Sumnu, G., Sahin, S., Meda, V., Koksel, H., & Chang, P. (2009). A study on degree of starch gelatinization in cakes baked in three different ovens. Food Bioprocess Technology. doi: 10.1007/s11947-009-0210-2 .

Sanz, P. D., Dominguez, M., & Mascheroni, R. H. (1987). Thermophysical properties of meat products. General bibliography and experimental data. Transactions of the ASAE, 30, 283.

Taher, B. H., & Farid, M. M. (2001). Cyclic microwave thawing of frozen meat: Experimental and theoretical investigation. Chemical Engineering and Processing, 40(4), 379–389.

Taoukis, P., Davis, E. A., Davis, H. T., Gordon, J., & Talmon, Y. (1987). Mathematical modeling of microwave thawing by the modified isotherm migration method. Journal of Food Science, 2, 455–463.

Tong, C. H., & Lund, D. B. (1993). Microwave heating of baked dough products with simultaneous heat and moisture transfer. Journal of Food Engineering, 19, 319–339.

Turabi, E., Sumnu, G., & Sahin, S. (2008). Optimization of baking of rice cakes in infrared–microwave combination oven by response surface methodology. Food Bioprocess Technology, 1, 64–73.

Vadivambal, R., & Jayas, D. S. (2009). Non-uniform temperature distribution during microwave heating of food materials—A review. Food Bioprocess Technology. doi: 10.1007/s11947-008-0136-0 .

Virtanen, A. J., Goedeken, D. L., & Tong, C. H. (1997). Microwave assisted thawing of model foods using feedback temperature control and surface cooling. Journal of Food Science, 62(19), 150–154.

Zeng, X., & Faghri, A. (1994). Experimental and numerical study of microwave thawing heat transfer for food materials. Transactions of ASME, 116, 446–455.