Machining as a Wedge Indentation

Journal of Applied Mechanics, Transactions ASME - Tập 67 Số 1 - Trang 128-139 - 2000
V. Madhavan1, Srinivasan Chandrasekar2, T. N. Farris3
1Department of Industrial and Manufacturing Engineering, Wichita State University, Wichita, KS 6720-0035
2School of Industrial Engineering, Purdue University West Lafayette, IN 47907
3School of Aeronautics and Astronautics, Purdue University, West Lafayette, IN 47907

Tóm tắt

A case is made for the consideration of single-point machining of ductile metals as a special type of wedge indentation process. A general-purpose finite element analysis of machining using iterative rezoning is developed based on this analogy. The accuracy of this analysis, which does not incorporate any separation criterion, is limited only by our knowledge of the material properties and the friction conditions at the tool-chip interface. Strain hardening, strain rate effects, and the temperature dependence of the properties of the work material can be taken into consideration. While Coulomb friction is assumed at the chip-tool interface in the present model, it can easily be reformulated to include more complicated frictional interactions such as adhesion. An analysis of the cutting/indentation of an isotropic work-hardening material at slow speeds under two different friction conditions is presented. It is shown that many of the important features of machining processes are consistently reproduced by the analysis. [S0021-8936(00)03501-7]

Từ khóa


Tài liệu tham khảo

Klamecki, B. E., 1973, “Incipient Chip Formation in Metal Cutting—A Three Dimension Finite Element Analysis,” Ph.D. thesis, University of Illinois at Urbana-Champaign, Urbana, IL.

Usui, E., and Shirakashi, T., 1982, “Mechanics of Machining—From Description to Predictive Theory,” On the Art of Cutting Metals—75 Years Later, ASME, New York, pp. 13–35.

Strenkowski, J. S. and Carroll, J. T., 1985, “A Finite Element Model of Orthogonal Metal Cutting,” J. Eng. Ind., 109, pp. 349–353.

Carroll, J. T. and Strenkowski, J. S., 1988, “Finite Element Models of Orthogonal Cutting With Application to Single Point Diamond Turning,” Int. J. Mech. Sci., 30, No. 2, pp. 899–920.

Shih, J. M., Chandrasekar, S., and Yang, T. Y., 1990, “Finite Element Simulation of Metal Cutting Process With Strain Rate and Temperature Effects,” Proc. ASME Symposium on Fundamental Issues in Machining, ASME, New York, p. 11.

Komvopoulos, K. and Erpenbeck, S. A., 1991, “Finite Element Modeling of Orthogonal Metal Cutting,” J. Eng. Ind., 113, pp. 253–267.

Lin, Z.-C., Chu, K.-T., and Pan, W.-C., 1994, “Study of the Stress, Strain, and Temperature Distributions of a Machined Workpiece Using a Thermo-Elastic-Plastic Coupled Model,” J. Mater. Process. Technol., 41, No. 3, pp. 291–310.

Zhang, B. and Bagchi, A., 1994, “Finite Element Simulation of Chip Formation and Comparison With Machining Experiment,” J. Eng. Ind., 116, No. 3, pp. 289–297.

Ernst, H., 1938, “Physics of Metal Cutting,” Machining of Metals, Amer. Soc. for Metals, pp. 1–34.

Finnie, I. , 1956, “Review of the Metal-Cutting Analyses of the Past Hundred Years,” Mech. Eng., 78, pp. 715–721.

Roth, R. N. and Oxley, P. L. B., 1972, “A Slip-Line Field Analysis for Orthogonal Machining Based on Experimental Flow Fields,” J. Mech. Eng. Sci., 14, pp. 85–97.

Sekhon, G. S. and Chenot, J. L., 1993, “Numerical Simulation of Continuous Chip Formation During Non-Steady Orthogonal Cutting,” Eng. Comput., 10, pp. 31–48.

Marusich, T. D., and Ortiz, M., 1994, “Finite Element Simulation of High-Speed Machining,” Proc. ASME Symposium on Mechanics in Materials Processing and Manufacturing, ASME, New York, pp. 137–149.

Belak, J. F., and Stowers, I. F., 1990, “A Molecular Dynamics Model of the Orthogonal Cutting Process,” ASPE Annual Conference, ASPE, Rochester, NY, pp. 259–264.

Inamura, T. and Takezawa, N., 1992, “Atomic-Scale Cutting in a Computer Using Crystal Models of Copper and Diamond,” Annu. CIRP, 41, No. 1, pp. 121–124.

Ikawa, N., Shimada, S., Tanaka, H., and Ohmori, G., 1991, “An Atomistic Analysis of Nanometric Chip Removal as Affected by Tool-Work Interaction in Diamond Turning,” Annu. CIRP, 40, No. 1, pp. 551–554.

Inamura, T., Takezawa, N., and Kumaki, Y., 1993, “Mechanics and Energy Dissipation in Nanoscale Cutting,” Annu. CIRP, 42, No. 1, pp. 79–82.

Shimada, S., Ikawa, N., Tanaka, H., Ohmori, G., and Uchikoshi, J., 1993, “Feasibility Study on Ultimate Accuracy in Microcutting Using Molecular Dynamics Simulation,” Annu. CIRP, 42, No. 1, pp. 91–94.

Rentsch, R. and Inasaki, I., 1995, “Investigation of Surface Integrity by Molecular Dynamics Simulation,” Annu. CIRP, 44, No. 1, pp. 295–298.

Bhattacharyya, A., 1984, Metal Cutting, Central Book Publishers, Bombay.

Enahoro, H. E. and Oxley, P. L. B., 1966, “Flow Along the Chip-Tool Interface in Orthogonal Metal Cutting,” J. Mech. Eng. Sci., 8, pp. 36–41.

Chaudhri, M. M. , 1993, “Subsurface Deformation Patterns Around Indentations in Work-Hardened Mild Steel,” Philos. Mag. Lett., 67, No. 2, pp. 107–115.

Hill, R., Lee, E. H., and Tupper, S. J., 1947, “The Theory of Wedge Indentation of Ductile Materials,” Proc. R. Soc. London, Ser. A, 188, pp. 273–289.

Hutchings, I. M. , 1976, “Deformation of Metal Surfaces by the Oblique Impact of Square Plates,” Int. J. Mech. Sci., 19, pp. 45–52.

Palmer, W. B., and Oxley, P. L. B., 1959, “Mechanics of Metal Cutting,” Proc. Inst. Mech. Eng., 173, pp. 623–638.

Kudo, H. , 1965, “Some New Slip-Line Solutions for Two-Dimensional Steady-State Machining,” Int. J. Mech. Sci., 7, pp. 43–55.

Childs, T. H. C. and Rowe, G. W., 1973, “Physics in Metal Cutting,” Rep. Prog. Phys., 36, pp. 223–288.

Tabor, D., 1951, The Hardness of Metals, Clarendon Press, Oxford,

Wright, P. K., Horne, J. G., and Tabor, D., 1979, “Boundary Conditions at the Chip-Tool Interface in Machining: Comparisons Between Seizure and Sliding Friction,” Wear, 54, pp. 371–390.

Thông tin
Thông tin xuất bản

Journal of Applied Mechanics, Transactions ASME

Tập 67 Số 1

128-139

Thông tin tác giả