Liquid Cladding Mediated Optical Fiber Sensors for Copper Ion Detection

Micromachines - Tập 9 Số 9 - Trang 471
Vien Thi Tran1,2, Nhu Hoa Thi Tran1,2, Than Thi Nguyen1,2, Won Jung Yoon3, Heongkyu Ju1,2,4
1Department of Nano-Physics, Gachon University, Seongnam-si 461-701, Korea
2Gachon Bionano Research Institute, Gachon University, Seongnam-si 461-701, Korea
3Department of Chemical and Bio Engineering, Gachon University, Seongnam-si 461-701, Korea
4Neuroscience Institute, Gil Hospital, Incheon 405-760, Korea

Tóm tắt

We present a label-free optical fiber based sensor device to detect copper ions (Cu2+) in water. A multimode optical fiber, with its polymer cladding removed along a 1-cm length, is used for the optical sensor head, where the injected Cu2+ in the liquid phase acts as a liquid cladding for the optical mode. The various Cu2+ concentrations modulate the numerical aperture (NA) of the liquid cladding waveguide part. The degree of NA mismatch between the liquid cladding and solid cladding guided parts gives rise to an optical power transmittance change, forming the sensing principle. The presented liquid cladding fiber sensor exhibits a minimum resolvable refractive index of 2.48 × 10−6. For Cu2+ detection, we functionalize the sensor head surface (fiber core) using chitosan conjugated ethylenediaminetetraacetic acid (EDTA) which captures Cu2+ effectively due to the enhanced chelating effects. We obtain a limit of detection of Cu2+ of 1.62 nM (104 ppt), which is significantly lower than the tolerable level in drinking water (~30 µM), and achieve a dynamic range of 1 mM. The simple structure of the sensor head and the sensing system ensures the potential capability of being miniaturized. This may allow for in-situ, highly-sensitive, heavy metal sensors in a compact format.

Từ khóa


Tài liệu tham khảo

Bost, 2016, Dietary copper and human health: Current evidence and unresolved issues, J. Trace Elem. Med. Biol., 35, 107, 10.1016/j.jtemb.2016.02.006

Cerpa, 2005, Is there a role for copper in neurodegenerative diseases?, Mol. Asp. Med., 26, 405, 10.1016/j.mam.2005.07.011

Fitzgerald, 1998, Safety guidelines for copper in water, Am. J. Clin. Nutr., 67, 1098S, 10.1093/ajcn/67.5.1098S

Haywood, 1980, The effect of excess dietary copper on the liver and kidney of the male rat, J. Comp. Pathol., 90, 217, 10.1016/0021-9975(80)90058-4

Waggoner, 1999, The role of copper in neurodegenerative disease, Neurobiol. Dis., 6, 221, 10.1006/nbdi.1999.0250

Giampietro, 2018, The pivotal role of copper in neurodegeneration: A new strategy for the therapy of neurodegenerative disorders, Mol. Pharm., 15, 808, 10.1021/acs.molpharmaceut.7b00841

Honda, 1987, Cadmium, zinc and copper relationships in kidney and liver of humans exposed to environmental cadmium, Arch. Toxicol., 59, 437, 10.1007/BF00316211

Wu, 1997, Low blank preconcentration technique for the determination of lead, copper, and cadmium in small-volume seawater samples by isotope dilution ICPMS, Anal. Chem., 69, 2464, 10.1021/ac961204u

Hare, 2012, Three-Dimensional atlas of iron, copper, and zinc in the mouse cerebrum and brainstem, Anal. Chem., 84, 3990, 10.1021/ac300374x

Liu, 2016, Near-Infrared upconversion chemodosimeter for in vivo detection of Cu2+ in wilson disease, Adv. Mater., 28, 6625, 10.1002/adma.201601140

Yang, 2016, Real-Time, selective detection of copper(II) using ionophore-grafted carbon-fiber microelectrodes, Anal. Chem., 88, 6962, 10.1021/acs.analchem.6b00825

Jin, 2014, Ultrasensitive and selective fluorimetric detection of copper ions using thiosulfate-involved quantum dots, Anal. Chem., 86, 7209, 10.1021/ac501515f

Yang, 2011, Phenol formaldehyde resin nanoparticles loaded with CdTe quantum dots: A fluorescence resonance energy transfer probe for optical visual detection of copper(II) ions, ACS Nano, 5, 2147, 10.1021/nn103352b

Ma, 2011, Colorimetric detection of copper ions in tap water during the synthesis of silver/dopamine nanoparticles, Chem. Commun., 47, 12643, 10.1039/c1cc15048k

Gao, 2017, Colorimetric sensor for highly sensitive and selective detection of copper ion, Anal. Methods, 9, 5094, 10.1039/C7AY01335C

Yin, 2014, A ligation dnazyme-induced magnetic nanoparticles assembly for ultrasensitive detection of copper ions, ACS Appl. Mater. Interface, 6, 4752, 10.1021/am405482a

Fen, 2011, Detection of mercury and copper ions using surface plasmon resonance optical sensor, Sens. Mater., 23, 325

Palumbo, 2003, Surface plasmon resonance sensing of liquids using polyelectrolyte thin films, Sens. Actuators B Chem., 91, 291, 10.1016/S0925-4005(03)00104-7

Chen, 2015, Sensitive detection of copper(II) ions based on the conformational change of peptides by surface plasmon resonance spectroscopy, Anal. Methods, 7, 8942, 10.1039/C5AY02047F

Yao, 2016, Partially reduced graphene oxide based FRET on fiber-optic interferometer for biochemical detection, Sci. Rep., 6, 23706, 10.1038/srep23706

Raghunandhan, 2016, Chitosan/PAA based fiber-optic interferometric sensor for heavy metal ions detection, Sens. Actuators B Chem., 233, 31, 10.1016/j.snb.2016.04.020

Cheng, 2014, Surface enhanced Raman scattering fiber optic sensor as an ion selective optrode: The example of Cd2+ detection, RSC Adv., 4, 64683, 10.1039/C4RA11260A

Ji, 2016, Detection of low-concentration heavy metal ions using optical microfiber sensor, Sens. Actuators B Chem., 237, 142, 10.1016/j.snb.2016.06.053

Tran, 2017, Label-Free optical biochemical sensors via liquid-cladding-induced modulation of waveguide modes, ACS Appl. Mater. Interface, 9, 31478, 10.1021/acsami.7b09252

Dattelbaum, 2005, Surfactant removal and silica condensation during the photochemical calcination of thin film silica mesophases, J. Phys. Chem. B, 109, 14551, 10.1021/jp051401+

2009, Synthesis and characterization by FTIR spectroscopy of silica aerogels prepared using several Si(OR)4 and R”Si(OR’)3 precursors, J. Mol. Struct., 919, 140, 10.1016/j.molstruc.2008.08.025

Fujita, 2016, Water soluble EDTA-linked chitosan as a zwitterionicflocculant for pH sensitive removal of Cu(II) ion, RSC Adv., 6, 10385, 10.1039/C5RA24175H

Ren, 2013, Magnetic EDTA-modified chitosan/SiO2/Fe3O4 adsorbent: Preparation, characterization, and application in heavy metal adsorption, Chem. Eng. J., 226, 300, 10.1016/j.cej.2013.04.059

Pawlak, 2003, Thermogravimetric and FTIR studies of chitosan blends, Thermochim. Acta, 396, 153, 10.1016/S0040-6031(02)00523-3

Senior, J.M., and Jamro, M.Y. (2009). Optical Fiber Communications Principles and Practice, Pearson. [3rd ed.].

Nu, 2018, Blood-based immunoassay of tau proteins for early diagnosis of Alzheimer’s disease using surface plasmon resonance fiber sensors, RSC Adv., 8, 7855, 10.1039/C7RA11637C

Nguyen, 2017, Integration of a microfluidic polymerase chain reaction device and surface plasmon resonance fiber sensor into an inline all-in-one platform for pathogenic bacteria detection, Sens. Actuators B Chem., 242, 1, 10.1016/j.snb.2016.10.137

Kim, 2016, Label-free quantitative immunoassay of fibrinogen in alzheimer disease patient plasma using fiber optical surface plasmon resonance, J. Electron. Mater., 45, 2354, 10.1007/s11664-015-4292-5

Nguyen, 2015, A regenerative label-free fiber optic sensor using surface plasmon resonance for clinical diagnosis of fibrinogen, Int. J. Nanomed., 10, 155

Nguyen, 2014, Bimetal coated optical fiber sensors based on surface plasmon resonance induced change in birefringence and intensity, Opt. Express, 22, 5590, 10.1364/OE.22.005590

Kim, 2017, A new Schiff-base chemosensor for selective detection of Cu2+ and Co2+ and its copper complex for colorimetric sensing of S2− in aqueous solution, Photochem. Photobiol. Sci., 16, 1677, 10.1039/c7pp00229g

Dong, 2012, Polyamine-functionalized carbon quantum dots as fluorescent probes for selective and sensitive detection of copper ions, Anal. Chem., 84, 6220, 10.1021/ac3012126

Yin, 2016, A sensitive fluorescent biosensor for the detection of copper ion inspired by biological recognition element pyoverdine, Sens. Actuators B Chem., 232, 257, 10.1016/j.snb.2016.03.128

Chandra, 2018, A simple benzildihydrazone derived colorimetric and fluorescent ‘on–off-on’ sensor for sequential detection of copper(II) and cyanide ions in aqueous solution, Sens. Actuators B Chem., 255, 701, 10.1016/j.snb.2017.08.067