Investigation of tension force in stretch forming of doubly curved aluminum alloy (Al5083) sheet
Tóm tắt
Aluminum alloys, which are suitable for lightweight applications, are being applied widely in diverse industries, especially to the external bodies of automobiles, ships, and aircraft. The external bodies of these vehicles have a three-dimensional geometric shape with various double curvatures. However, aluminum sheets with double curvatures are difficult to form because of their elastic recovery characteristic, known as the springback effect. As a consequence, the stretch-forming process is widely used to reduce the springback phenomenon and to obtain the desired quality product. In the stretch-forming process for aluminum sheets, the stretching conditions should be precisely designed to achieve high accuracy and minimum product defects. In particular, thickness reduction and elastic recovery of the formed plate must be considered during the determination of the stretching force. In this study, the deformation of an aluminum plate according to the magnitude of a tension force was analyzed and an optimal tension force proposed, while considering changes in the mechanical properties of the formed material. FE simulations and experiments show that the proposed tension force can be used to manufacture doubly curved aluminum surfaces with minimum thickness reduction and high accuracy
Tài liệu tham khảo
Verma, R., Ghosh, A., Kim, S., and Kim, C., “Grain Refinement and Superplasticity in 5083 Al, Materials Science and Engineering: A, Vol. 191, No. 1, pp. 143–150, 1995.
Iwasaki, H., Higashi, K., Tanimura, S., Komatubara, T., and Hayami, S., “Superplastic Deformation Characteristics of 5083 Aluminum Alloy, Superplasticity in Advanced Materials, pp. 447–452, 1991.
Zhou, Z.-H., Cai, Z.-Y., and Li, M.-Z., “Stretching Process based on Multi-Point Die and Its Numerical Simulation, Journal of Jilin University of Technology (Natural Science Edition), Vol. 35, No. 3, pp. 287–291, 2005.
Heo, S. C., Seo, Y. H., Park, J. W., Ku, T. W., Kim, J., and Kang, B. S., “Numerical and Experimental Study on Plate Forming Process using Flexible Die, Transactions of Materials Processing, Vol. 17, No. 8, pp. 570–578, 2008.
Cai, Z.-Y., Wang, S.-H., and Li, M.-Z., “Numerical Investigation of Multi-Point Forming Process for Sheet Metal: Wrinkling, Dimpling and Springback, The International Journal of Advanced Manufacturing Technology, Vol. 37, No. 9 0, pp. 927–936, 2008.
Liu, W., Yang, Y.-Y., and Li, M.-Z., “Numerical Simulation of Multi-Point Stretch Forming and Controlling on Accuracy of Formed Workpiece, The International Journal of Advanced Manufacturing Technology, Vol. 50, No. 1 , pp. 61–66, 2010.
Li, L., Seo, Y.-H., Heo, S.-C., Kang, B.-S., and Kim, J., “Numerical Simulations on Reducing the Unloading Springback with Multi-Step Multi-Point Forming Technology, The International Journal of Advanced Manufacturing Technology, Vol. 48, No. 1 , pp. 45–61, 2010.
Davoodi, B. and Zareh-Desari, B., “Assessment of Forming Parameters Influencing Spring-Back in Multi-Point Forming Process: A Comprehensive Experimental and Numerical Study, Materials & Design, Vol. 59, pp. 103–114, 2014.
He, D.-H., Li, D.-S., Li, X.-Q., and Jin, C.-H., “Optimization on Springback Reduction in Cold Stretch Forming of Titanium-Alloy Aircraft Skin, Transactions of Nonferrous Metals Society of China, Vol. 20, No. 12, pp. 2350–2357, 2010.
Nanu, N. and Brabie, G., “Analytical Model for Prediction of Springback Parameters in the Case of U Stretch–Bending Process as a Function of Stresses Distribution in the Sheet Thickness, International Journal of Mechanical Sciences, Vol. 64, No. 1, pp. 11–21, 2012.
Cai, Z.-Y., Wang, S.-H., Xu, X.-D., and Li, M.-Z., “Numerical Simulation for the Multi-Point Stretch Forming Process of Sheet Metal, Journal of Materials Processing Technology, Vol. 209, No. 1, pp. 396–407, 2009.
Pearce, R., “Sheet Metal Forming, Springer Science & Business Media, pp. 79–88, 1991.
Mielnik, E. M., “Metalworking Science and Engineering, McGraw-Hill, p. 34, 1991.
Dassault Systems, “Abaqus/CAE User’s Manual, Version 6.10, http://abaqusdoc.ucalgary.ca/pdf_books/CAE.pdf (Accessed 26 FEB 2016)
Moon, Y. H., Kim, D. W., and Van Tyne, C. J., “Analytical Model for Prediction of Sidewall Curl during Stretch-Bend Sheet Metal Forming, International Journal of Mechanical Sciences, Vol. 50, No. 4, pp. 666–675, 2008.
Marciniak, Z., Duncan, J. L., and Hu, S. L., “The Mechanics of Sheet Metal Forming, Edward Arnold, pp. 136–151, 2002.
Zhang, Q., Dean, T., and Wang, Z., “Numerical Simulation of Deformation in Multi-Point Sandwich Forming, International Journal of Machine Tools and Manufacture, Vol. 46, No. 7, pp. 699–707, 2006.
Cai, Z. Y. and Li, M. Z., “Optimum Path Forming Technique for Sheet Metal and Its Realization in Multi-Point Forming, Journal of Materials Processing Technology, Vol. 110, No. 2, pp. 136–141, 2001.
Meyers, M. A., Mishra, A., and Benson, D. J., “Mechanical Properties of Nanocrystalline Materials, Progress in Materials Science, Vol. 51, No. 4, pp. 427–556, 2006.