Insertion loss measurement of a ferrite clamp used in the CISPR 22 radiated emission measurements
2002 IEEE International Symposium on Electromagnetic Compatibility - Tập 1 - Trang 6-11 vol.1
Tóm tắt
The CISPR published an amendment to CISPR 22 for requesting ferrite clamps attached on EUT cables and specified the insertion loss of the clamps. But there are no specifications for the insertion loss measurement. Hence, theoretical and experimental investigations have been carried out to develop an appropriate measurement method with requisite measuring instruments. A 150 /spl Omega/ instrument consisting of a cylindrical rod and a ground plane is proposed. Then, the measurement uncertainty is evaluated with respect to the errors attributable to (1) the position of ferrite cores under measurement, (2) the characteristic impedance of the measuring instrument, and (3) the eccentric displacement of a ferrite core. In addition, more accurate measurements are carried out using the TRL calibration procedures.
Từ khóa
#Loss measurement #Insertion loss #Ferrites #Clamps #Instruments #Impedance measurement #Displacement measurement #Position measurement #Cables #Measurement uncertaintyTài liệu tham khảo
2001, CISPR/A/WG1 (Bristol/Nojima-Sugiura-Goto)
collin, 1966, Foundations for Microwave Engineering
yeo, 1999, Network Analyzer Calibration for Measurements Near Waveguide Cutoff Frequency, Microwave Journal
zaher samir, 2000, A Practical Approach for Estimation of Load Effect Produced by Ferrite Core Attached to Wire above a Ground Plane, Trans IEE of Japan, 120 c
1999, Specifications for Radio Disturbance and Immunity Measuring Apparatus and Methods-Part 1 Radio Disturbance and Immunity Measuring Apparatus, CISPR 16-1-4
2000, Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement, CISPR22 Amend, 1