Influence of the Quenching Rate on the Structure and Magnetic Properties of the Fe-Based Amorphous Alloy

Archives of Metallurgy and Materials - Tập 61 Số 1 - Trang 439-444 - 2016
M. Nabiałek1
1CzESToCHoWA UnIvERSITY oF TECHnologY, InSTITUTE oF PHYSICS, 19 ARMII KRAjoWEj Av., 42-200 CzESToCHoWA,

Tóm tắt

This paper presents the results of investigations into the structure, microstructure and magnetic properties of Fe61Co10Y8W1B20 amorphous alloy. The alloy samples were in two physical forms: (1) plates of approximate thickness 0.5 mm (so-called bulk amorphous alloys) and (2) a ribbon of approximate thickness 35 μm (so-called classic amorphous alloy). The investigations comprised: X-ray diffractometry, Mössbauer spectrometry, transmission electron microscopy, and selected magnetic measurements; all of the investigations were carried out on samples in the as-quenched state. Analysis of the obtained SEM and TEM images, X-ray diffraction patterns, Mössbauer spectrometry results and measurements of the magnetisation in a high magnetic field facilitated collectively the detailed description of the structure of the investigated alloy, which was found to depend on the quenching speed.

Từ khóa


Tài liệu tham khảo

Nabiałek, 2015, Influence of the production method of Fe Co amorphous alloy on the resulting microstructure and hyperfine field distribution, Alloy Compd, 22, 628

Holstein, 1940, Field Dependence of the Intrinsic Domain Magnetization of a Ferromagnet, Rev, 21, 58

Chen, 1974, Thermodynamic considerations on the formation and stability of metallic glasses, Acta Metall, 3, 22

Nabialek, 2014, Effect of manufacturing method on the magnetic properties and formation of structural defects in Fe Co amorphous alloy, Alloy Compd, 11, 615

Cao, 2013, Transmission electron microscopy study of the microstructure of a Ti alloy, Mater Charact, 17, 83

Nabiałek, 2014, The structural stability of the Fe Co bulk amorphous alloy, Arch Metall Mater, 15, 59

Huang, 2008, Formation of bulk metallic glasses in the Fe transition metal ) system, Alloys Compd, 1, 460

Inoue, 1995, High strength bulk amorphous alloys with low critical cooling rates JIM, Trans, 10, 36

Haitao Miao, 2015, Fabrication and properties of soft magnetic Fe - Co bulk metallic glasses with high glass - forming ability, Cryst Solids, 2, 421

Wang, 2015, Fabrication of Fe - based bulk metallic glasses from low - purity industrial raw materials, Alloys Compd, 4, 62

Błoch, 2015, Magnetic properties of the suction - cast bulk amorphous alloy : Co, Magn Mater, 5, 390

Corb, 1983, Chemical bonding magnetic moments and local symmetry in transition - metal - metalloid alloys, Rev B, 25, 27

Kronmüller, 1981, Micromagnetism and microstructure of amorphous alloy, Appl Phys, 19, 1859, 10.1063/1.329552

Nabiałek, 2014, Influence of the cooling speed on the soft magnetic and mechanical properties of Fe Co amorphous alloy, Alloy Compd, 12, 615

Tan, 2007, Magnetic properties of Fe - Co magnet prepared by suction casting, Cryst Solids, 7, 353

Wolfgang Wallisch, 2015, Synthesis and characterisation of ( Fe Co microcrystalline alloys, Alloy Compd, 14, 644

Chen, 2005, Enhanced glass forming ability of Fe - Co alloys with Ni addition, Sci Eng, 8, 402

Hirotsu, 2004, , Intermetallics, 23, 1081, 10.1016/j.intermet.2004.04.002

Huang, 2009, Are there two glass transitions in Fe bulk metallic glasses, and Scripta Mater, 9, 60

Xingjie Jia, Synthesis and properties of ferromagnetic Fe - based ( Fe Co ) - Mo bulk metallic glasses with large supercooled liquid region http dx doi org, Physica, 6, 10.1016/j.physb.2015.05.004

Gupta, 2011, Structural evolution and the kinetics of Cu clustering in the amorphous phase of Fe alloy, Appl Phys, 18, 110

Kaul, 1981, Magnetic properties of amorphous ( fe ni fe ni si fe ni alloys, IEEE Trans Magn, 24, 17

Nabiałek, 2010, Influence of structural defects on the magnetization process in high - magnetic fields in the Fe Co alloy in the form of ribbons and plates, Magn Mater, 13, 322