INFLUENCE OF AN OVERLOAD ON THE FATIGUE CRACK GROWTH IN STEELS

Claude Robin1, M. Louah1, Julien Capelle1
1Laboratoire de Fiabilité Mécanique, Faculté des Sciences, Ile du Saulcy, 57000 Metz, France

Tóm tắt

Abstract— This study is concerned with the influence of a single‐peak overload and the overload ratio on the subsequent rate of growth of a fatigue crack in steels. Retardation increases with increasing overload ratio.The crack opening load was also measured during all tests. It is shown that the Elber's crack closure concept is not able to explain the effect of overloads. The importance of the material yield stress was evaluated by testing steels of different strength. It seems that the residual stress state induced by the overload is the major factor causing retardation. Two models are analyzed.

Từ khóa


Tài liệu tham khảo

Mille P.(1979)Closure phenomena at crack tips in steels (in French).Ph.D thesis University of Technology of Compiegne.

10.1179/msc.1977.11.8-9.399

10.1016/0013-7944(79)90038-9

10.1016/0013-7944(76)90005-9

Fuhring H., 1979, Structural memory of cracked components under irregular loading, ASTM STP, 677, 144

10.1016/0022-5096(60)90013-2

Elber W., 1971, The significance of fatigue crack closure, ASTM STP, 486, 230

Trebules V. W., 1973, Effects of multiple overloads on fatigue crack propagation in 2024 T3 aluminium alloy, ASTM STP, 536, 115

Robin C., 1978, Closure phenomena at crack tips in 2618A aluminium alloy (in French), J. Méc. Appl., 2, 211

10.1115/1.3425362

Willenborg J. Engle R. M.andWood H. A.(1971)A crack growth retardation model using an effective stress concept. U.S. Air Force System Command Air Force Flight. Dyn. Lab. Tech. Rep. AFFDL TM 71–LFBR.

Chanani G. N.(1976)Fundamental investigation of fatigue crack growth retardation in aluminium alloys. U.S. Air Force System Command Air Force Mater. Lab. Tech. Rep. AFML‐TR‐76–156.

10.1016/0013-7944(78)90040-1

Munz D.(1980) Private communication.

Berthel (1980)Ph.D thesis University of Technology of Compiegne.

Lindley T. C., 1980, Fatigue crack growth under spectrum loading (in French), 381

Rice J. R., 1967, Mechanics of crack tip deformation and extension by fatigue, ASTM STP, 475, 247