Hybrid micromachining of glass using ECDM and micro grinding

Masuzawa, T., “State of the art of micromachining,” CIRP Annals, Vol. 49, No. 2, pp. 473–488, 2000.

Kim, B. H., Ryu, S. H., Choi, D. K., and Chu, C. N., “Micro electrochemical milling,” J. Micromech. Microeng., Vol. 15, No. 1, pp. 124–129, 2005.

Chung, D. K., Shin, H. S., Park, M. S., Kim, B. H., and Chu, C. N., “Recent researches in micro electrical machining,” Int. J. Precis. Eng. Manuf., Vol. 12, No. 2, pp. 371–380, 2011.

Park, J. W., Chung, D. K., Kim, B. H., Ok, J. G., Kim, W. J., Kim, Y. H., and Chu, C. N., “Wire electrical discharge machining of carbonnanofibermats for field emission,” Int. J. Precis. Eng. Manuf., Vol. 13, No. 4, pp. 593–599, 2012.

Dubey, A. K. and Yadava, V., “Laser beam machining — A review,” Int. J. Mach. Tool. Manu., Vol. 48, No. 6, pp. 609–628, 2008.

Bu, M. Q., Melvin, T., Ensell, G. J., Wilkinson, J. S., and Evans, A. G. R., “A new masking technology for deep glass etching and its microfluidic application,” Sensor Actuat. A-Phys., Vol. 115, pp. 476–482, 2004.

Belloy, E., Thurre, S., Walckiers, E., Sayah, A., and Gijs, M. A. M., “The introduction of powder blasting for sensor and microsystem applications,” Sensor Actuat. A-Phys., Vol. 84, pp. 330–337, 2000.

Wüthrich, R. and Fascio, V., “Machining of non-conducting materials using electrochemical discharge phenomenon-an overview,” Int. J. Mach. Tool. Manu., Vol. 45, No. 9, pp. 1095–1108, 2005.

Zheng, Z. P., Cheng. W. H., Huang, F. Y., and Yan, B. H., “3D microstructuring of Pyrex glass using the electrochemical discharge machining process,” J. Micromech. Microeng., Vol. 17, No. 5, pp. 960–966, 2007.

Cao, X. D., Kim, B. H., and Chu, C. N., “Micro-structuring of glass with features less than 100 μm by electrochemical discharge machining,” Precis. Eng., Vol. 33, No. 4, pp. 459–465, 2009.

Kuljanic, E., Fioretti, M., Beltrame, L., and Miani, F., “Milling titanium compressor blades with pcd cutter,” CIRP Annals, Vol. 47, No. 1, pp. 61–64, 1998.

Morehead, M., Huang, Y., and Hartwig, K. T., “Machinability of ultrafine-grained copper using tungsten carbide and polycrystalline diamond tools,” Int. J. Mach. Tool. Manu., Vol. 47, No. 2, pp. 286–293, 2007.

Heinzel, C. and Rickens, K., “Engineered wheels for grinding of optical glass,” CIRP Annals, Vol. 58. No. 1, pp. 315–318, 2009.

Denkena, B., Friemuth, T., Reichstein, M., and Tönshoff, H. K., “Potentials of different process kinematics in micro grinding,” CIRP Annals, Vol. 52, No. 1, pp. 463–466, 2003.

Suzuki, H., Moriwaki, T., Yamamoto, Y., and Goto, Y., “Precision cutting of aspherical ceramic molds with micro pcd milling tool,” CIRP Annals, Vol. 56, No. 1, pp. 131–134, 2007.

Morgan, C. J., Vallance, R. R., and Marsh, E. R., “Micro machining glass with polycrystalline diamond tools shaped by micro electro discharge machining,” J. Micromech. Microeng., Vol. 14, No. 12, pp. 1687–1692, 2004.

Cao, X. D., Kim, B. H., Chung, D. K., and Chu, C. N., “Fabrication of PCD micro tool and its hybrid micro machining,” J. of KSPE, Vol. 28, No. 6, pp. 694–700, 2011.

Bifano, T., Dow, T., and Scattergood, R., “Ductile-regime grinding of brittle materials: experimental results and the development of a model,” SPIE, pp. 108–115, 1988.

Golini, D., “Transition between brittle and ductile mode in loose abrasive grinding,” SPIE, pp. 80–91, 1990.

Chen, M. J., Zhao, Q. L., Dong, S., and Li, D., “The critical conditions of brittle-ductile transition and the factors influencing the surface quality of brittle materials in ultra-precision grinding,” J. Mater. Process Tech., Vol. 168, pp. 75–82, 2005.

Durgumahanti, U. S. P., Singh, V., and Rao, P. V., “A new model for grinding force prediction and analysis,” Int. J. Mach. Tool. Manu., Vol. 50, No. 3, pp. 231–240, 2010.

Li, L. C., Fu, J. Z., and Peklenik, J., “A study of grinding force mathematical mode,” CIRP Annals, Vol. 29, No. 1, pp. 245–249, 1980.