Hybrid composites prepared from Industrial waste: Mechanical and swelling behavior

Agrawal, 2004, Use of marble waste in rubber industry: Part I (in NR compound), Prog Rubb Plast Recycl Technol, 20, 229, 10.1177/147776060402000305

Ahmed, 2013, Properties of natural rubber composite incorporated with industrial waste/carbon black hybrid filler, Chem Lett, 42, 1105, 10.1246/cl.130383

Ahmed, 2012, Characterization of mechanical properties of marble sludge/natural rubber composites, J Chem Soc Pak, 33, 1468

Park, 2013, Effect of carbon nanotubes with different lengths on mechanical and electrical properties of silica-filled styrene butadiene rubber compounds, J Ind Eng Chem, 19, 712, 10.1016/j.jiec.2012.10.012

Wang, 1999, The role of filler networking in dynamic properties of filled rubber, Rubb Chem Technol, 72, 430, 10.5254/1.3538812

Hamed, 2004, Tear strength of black-filled natural rubber crosslinked via conventional. Efficient sulfur cures., Rubb Chem Technol, 77, 227, 10.5254/1.3547819

Choi, 2009, Influence of the swelling temperature and acrylonitrile content of NBR on the water swelling behaviors of silica-filled NBR vulcanizates, J Ind Eng Chem, 15, 167, 10.1016/j.jiec.2008.09.016

Furtado, 2000, Mica as additional filler in SBR–silica compounds, Eur Polym J, 36, 1717, 10.1016/S0014-3057(99)00215-3

Mohan, 2011, Effect of nanoclay reinforcement on structure, thermal and mechanical properties of NR/SBR J, Ind Eng Chem, 17, 264, 10.1016/j.jiec.2011.02.019

Helaly, 2007, Preparation and evaluation of some investigated natural and acrylonitrile rubber vulcanizates for physiotherapeutic purposes, Polym Plast Technol Eng, 46, 63, 10.1080/03602550600948962

Ismail, 2005, The effect of feldspar loading on curing characteristics, mechanical properties, swelling behavior and morphology of natural rubber vulcanizates, Int J Polym Mater, 54, 43, 10.1080/00914030390245929

Sukumar, 2004, Organomodified kaolin as reinforcing filler for natural rubber, J Appl Polym Sci, 107, 3476, 10.1002/app.27469

Escocio, 2008, Rheology and processability of natural rubber composites with mica, Int J Polym Mater, 57, 374, 10.1080/00914030701420202

Choi, 2010, Water swelling behaviors of silica-reinforced NBR composites in deionized water and salt solution, J Ind Eng Chem, 16, 238, 10.1016/j.jiec.2010.01.052

Da-Costa, 2003, Rice-husk-ash-filled natural rubber. II. Partial replacement of commercial fillers and the effect on the vulcanization process, J Appl Polym Sci, 87, 1405, 10.1002/app.11514

Murphy, 1998, Carbon-silica dual phase filler: Part III: ESCA and FTIR characterization, Rubb Chem Technol, 71, 998, 10.5254/1.3538525

Zhang, 2002, Carbon-silica dual phase filler application to tread compounds, Rubb World, 226, 43

Rattanasom, 2007, Reinforcement of natural rubber with silica/carbon black hybrid filler, Polym Test, 26, 369, 10.1016/j.polymertesting.2006.12.003

Ismail, 2008, Hybrid-filler filled PP/NR composites: effects of natural weathering on mechanical and thermal properties and morphology, J Vinyl Addit Technol, 14, 142, 10.1002/vnl.20156

Praveen, 2009, Synergistic effect of carbon black and nanoclay fillers in styrene butadiene rubber matrix: development of dual structure, Composites Part A, 40, 309, 10.1016/j.compositesa.2008.12.008

Abdul-Kader, 2004, Influence of clay on the vulcanization kinetics of fluoroelastomer nanocomposites, Polymer, 45, 2237, 10.1016/j.polymer.2004.01.052

Jacob, 2004, Natural rubber composites reinforced with sisal/oil palm hybrid fibers: tensile and cure characteristics, J Appl Polym Sci, 93, 2305, 10.1002/app.20696

Leong, 2004, Characterization of talc/calcium carbonate filled polypropylene hybrid composites weathered in a natural environment, Polym Degrad Stab, 83, 411, 10.1016/j.polymdegradstab.2003.08.004

Ahmed, 2013, The effect of silica on the properties of marble sludge filled hybrid natural rubber composites, J King Saud Univ (Science), 25, 331, 10.1016/j.jksus.2013.02.004

Ahmed, 2013, An assessment of rice husk ash modified, marble sludge loaded natural rubber hybrid composites, J Mater Environ Sci, 205

Ahmed, 2013, Characteristics of natural rubber hybrid composites based on marble sludge/carbon black and marble sludge/rice husk derived silica, J Ind Eng Chem, 19, 1169, 10.1016/j.jiec.2012.12.014

Ahmed, 2013, Effect of micro sized marble sludge on physical properties of natural rubber composites, Chem Ind Chem Eng Quart, 19, 281, 10.2298/CICEQ111225062A

Malini, 2003, Loading dependence similarities on the cure time and mechanical properties of rubber ferrite composites containing nickel zinc ferrite, Mater Lett, 57, 3381, 10.1016/S0167-577X(03)00079-X

Govindjee, 1991, A micro-mechanically based continuum damage model for carbon black filled rubbers incorporating Mollins effect, J Mech Phys Sol, 39, 87, 10.1016/0022-5096(91)90032-J

Wang, 1998, Effect of polymer–filler and filler–filler interactions on dynamic properties of filled vulcanizates, Rubb Chem Technol, 71, 520, 10.5254/1.3538492

Fan, 2001, Effect of crosslink structures on dynamic mechanical properties of natural rubber vulcanizates under different aging conditions, J Appl Polym Sci, 81, 710, 10.1002/app.1488

Bhowmick, 2002, Thermal, UV- and sunlight ageing of thermoplastic elastomeric natural rubber–polyethylene blends, J Mater Sci, 37, 5141, 10.1023/A:1021076724403

Ahagon, 1990, Aging of tire parts during service. I. Types of aging in heavy-duty tires, Rubb Chem Technol, 63, 683, 10.5254/1.3538282

Baldwin, 2005, Accelerated aging of tires, Part II, Rubb Chem Technol, 78, 236, 10.5254/1.3547887

Clarke, 2006, Kinetics of the effect of ageing on tensile properties of a natural rubber compound, J Appl Polym Sci, 102, 3732, 10.1002/app.24634

Osabohien, 2008, Utilization of bowstring hemp fiber as a filler in natural rubber compounds, J Appl Polym Sci, 107, 210, 10.1002/app.27012

Blow, 1981