Historical review of Zig-Zag theories for multilayered plates and shells
Tóm tắt
This paper gives a historical review of the theories that have been developed for the analysis of multilayered structures. Attention has been restricted to the so-called Zig-Zag theories, which describe a piecewise continuous displacement field in the plate thickness direction and fulfill interlaminar continuity of transverse stresses at each layer interface. Basically, plate and shell geometries are addressed, even though beams are also considered in some cases. Models in which the number of displacement variables is kept independent of the number of constitutive layers are discussed to the greatest extent. Attention has been restricted to those plate and shell theories which are based on the so-called method of hypotheses or axiomatic approach in which assumptions are introduced for displacements and/or transverse stresses. Mostly, the work published in the English language is reviewed. However, an account of a few articles originally written in Russian is also given. The historical review conducted has led to the following main conclusions. 1) Lekhnitskii (1935) was the first to propose a Zig-Zag theory, which was obtained by solving an elasticity problem involving a layered beam. 2) Two other different and independent Zig-Zag theories have been singled out. One was developed by Ambartsumian (1958), who extended the well-known Reissner-Mindlin theory to layered, anisotropic plates and shells; the other approach was introduced by Reissner (1984), who proposed a variational theorem that permits both displacements and transverse stress assumptions. 3) On the basis of historical considerations, which are detailed in the paper, it is proposed to refer to these three theories by using the following three names: Lekhnitskii Multilayered Theory, (LMT), Ambartsumian Multilayered Theory (AMT), and Reissner Multilayered Theory (RMT). As far as subsequent contributions to these three theories are concerned, it can be remarked that: 4) LMT although very promising, has almost been ignored in the open literature. 5) Dozens of papers have instead been presented which consist of direct applications or particular cases of the original AMT. The contents of the original works have very often been ignored, not recognized, or not mentioned in the large number of articles that were published in journals written in the English language. Such historical unfairness is detailed in Section 3.2. 6) RMT seems to be the most natural and powerful method to analyze multilayered structures. Compared to other theories, the RMT approach has allowed from the beginning development of models which retain the fundamental effect related to transverse normal stresses and strains. This review article cites 138 references.
Từ khóa
Tài liệu tham khảo
Cauchy AL (1828), Sur l’e´quilibre et le mouvement d’une plaque solide, Exercises de Matematique 3, 328–355.
Poisson SD (1829), Memoire sur l’e´quilibre et le mouvement des corps elastique, Mem. Acad. Sci. 8, 357357.
Kirchhoff G (1850), U¨ber das Gleichgewicht und die Bewegung einer elastischen Scheibe, J Angew Math 40, 51–88.
Love AEH (1927), The Mathematical Theory of Elasticity, 4th Edition, Cambridge Univ Press, Cambridge.
Reissner E (1945), The effect of transverse shear deformation on the bending of elastic plates, ASME J. Appl. Mech. 12, 69–76.
Mindlin RD (1951), Influence of rotatory inertia and shear in flexural motions of isotropic elastic plates, ASME J. Appl. Mech. 18, 1031–1036.
Hildebrand FB, Reissner E, and Thomas GB (1938), Notes on the foundations of the theory of small displacements of orthotropic shells, NACA TN-1833, Washington DC.
Pagano NJ (1969), Exact solutions for composite laminates in cylindrical bending, J. Compos. Mater. 3, 398–411.
Carrera E (1995), A class of two dimensional theories for multilayered plates analysis, Atti Acc Sci Torino, Mem Sci Fis (19–20), 49–87.
Reddy JN (1997), Mechanics of Laminated Composite Plates, Theory and Analysis, CRC Press.
Koiter WT (1959), A consistent first approximations in the general theory of thin elastic shells, Proc of Symp. on the Theory of Thin Elastic Shells, Aug 1959, North-Holland, Amsterdam, 12–23.
Ambartsumian SA (1962), Contributions to the theory of anisotropic layered shells, Appl. Mech. Rev. 15, 245–249.
Ambartsumian SA (2002), Nontraditional theories of shells and plates, Appl. Mech. Rev. 55(5), R35–R44R35–R44.
Grigolyuk EI and Kogan FA (1972), The present status of the theory of multilayered shells, Prikl. Mekh. 8, 3–17.
Librescu L and Reddy JN (1986), A critical review and generalization of transverse shear deformable anisotropic plates, Euromech Colloquium 219, Kassel, Sept (1986), Refined Dynamical Theories of Beams, Plates and Shells and Their Applications, I Elishakoff and Irretier (eds), Springer Verlag, Berlin (1987), 32–43.
Grigolyuk EI and Kulikov GM (1988), General directions of the development of theory of shells, Mekhanica Kompozitnykh Materialov 24, 287–298.
Kapania RK and Raciti S (1989), Recent advances in analysis of laminated beams and plates, AIAA J. 27(7), 923–946.
Kapania RK (1989), A review on the analysis of laminated shells, ASME J. Pressure Vessel Technol. 111(2), 88–96.
Noor AK and Burton WS (1989), Assessment of shear deformation theories for multilayered composite plates, Appl. Mech. Rev. 42(1), 1–18.
Noor AK and Burton WS (1990), Assessment of computational models for multilayered composite shells, Appl. Mech. Rev. 43(4), 67–97.
Jemlelita G (1990), On kinematical assumptions of refined theories of plates: A survey, ASME J. Appl. Mech. 57, 1080–1091.
Vasiliev VV and Lur’e SA (1992), On refined theories of beams, plates and shells, J. Compos. Mater. 26, 422–430.
Reddy JN and Robbins DH (1994), Theories and computational models for composite laminates, Appl. Mech. Rev. 47(6), 147–165.
Noor AK , Burton S, and Bert CW (1996), Computational model for sandwich panels and shells, Appl. Mech. Rev. 49(3), 155–199.
Lur’e SA and Shumova NP (1996), Kinematic models of refined theories concerning composite beams, plates and shells, Int., Appl. Mech. 32, 422–430.
Grigorenko YaM (1996), Approaches to numerical solution of linear and nonlinear problems in shell theory in classical and refined formulations, Int., Appl. Mech. 32, 409–442.
Grigorenko YaM and Vasilenko AT (1997), Solution of problems and analysis of the stress strain state of non-uniform anisotropic shells (survey), Int., Appl. Mech. 33, 851–880.
Altenbach H (1998), Theories for laminated and sandwich plates. A review, Int., Appl. Mech. 34, 243–252.
Carrera E (2001), Developments, ideas and evaluations based upon the Reissner’s mixed theorem in the modeling of multilayered plates and shells, Appl. Mech. Rev. 54(4), 301–329.
Lekhnitskii SG (1968), Anisotropic Plates, 2nd Edition, Translated from the 2nd Russian Edited by SW Tsai and Cheron, Bordon and Breach.
Ambartsumian SA (1961), Theory of Anisotropic Shells, Fizmatzig, Moskwa;
Translated from Russian, NASA TTF-118 (1964).
Ambartsumian SA (1969), Theory of Anisotropic Plates, Translated from Russian by T Cheron and Edited by JE Ashton Tech Pub Co.
Ambartsumian SA (1991), Fragments of the Theory of Anisotropic Shells, World Scientific Publ Co, Singapore.
Librescu L (1975), Elasto-statics and Kinetics of Anisotropic and Heterogeneous Shell-Type Structures, Noordhoff Int, Leyden, Netherland.
Lekhnitskii SG (1935), Strength calculation of composite beams, Vestnik inzhen i tekhnikov, No 9.
Ponyatovskii VV (1962), On the theory of plates of medium thickness, Prikl. Mat. Mekh. 26, 335–441.
Agolovyan LA (1966), Use of the method of asymptotic integration to construct an approximate theory of anisotropic shells, Prikl. Mat. Mekh. 30, 388–398.
Gold’enveizer LP (1968), Method of veryfing the theory of shells, Prikl. Mat. Mekh. 32, 684–695.
Fettahlioglu OA and Steele CR (1974), Asymptotic solutions for orthotropic non-homogeneous shells of revolution, ASME J. Appl. Mech. 44, 753–758.
Prusakov AP (1975), Construction of a theory of flexure plates of moderate thickness by an ergonomic asymptotic method, Prikl. Mekh. 11, 44–51.
Prusakov AP and Plekhanov AV (1977), Constructing an improved theory of two-layered plates, Prikl. Mekh. 13, 59–75.
Widera GEO and Fan H (1988), On the derivation of a refined theory for non-homogeneous anisotropic shells of revolution, ASME J. Appl. Mech. 110, 102–105.
Hodges DH , Lee BW, and Atilgan AR (1993), Application of the variational-asymptotic method to laminated composite plates, AIAA J. 31, 1674–1983.
Satyrin VG and Hodges DH (1996), On asymptotically correct linear laminated plate theory, Int. J. Solids Struct. 33, 3649–3671.
Prusakov AP (1996), Analysis of the theory of bending of transversally isotropic plates, Int., Appl. Mech. 32, 554–559.
Savin GN and Khoma IYu (1971), On the theory of anisotropic shells which are free from the kinematic hypothesis of a normal element, Prikl. Mekh. 7, 9–15.
Khoroshun LP (1978), Derivation of equations for laminate plates and shells, Prikl. Mekh. 14, 3–21.
Prusakov AP (1971), The non linear bending of gently sloping multilayer shells, Prikl. Mekh. 7, 3–8.
Putcha NS and Reddy JN (1986), A refined mixed shear flexible finite element for the nonlinear analysis of laminated plates, Compos. Struct. 22, 529–538.
Prusakov AP (1997), Toward a theory of bending of laminated plates, Int., Appl. Mech. 33, 227–232.
Fares ME and Zenkour AM (1998), Mixed variational formula for the thermal bending of laminated plates, J. Therm. Stresses 22, 347–365.
Grigolyuk EI and Chulkov PP (1964), Theory of viscolesatic multilayered shells with hard filler, Prikl. Mekh. Tekh. Fiz. 5, 109–117.
Grigolyuk EI and Chulkov PP (1972), On the theory of multilayered shells, Contribution to the Theory of Aircraft Structures, Delft, 171–183.
Cheung YK and Wu CI (1972), Free vibrations of thick, layered cylinders having finite length with various boundary conditions, J. Sound Vib. 24, 189–200.
Chepiga S (1976), Refined theory of laminated plates, Prikl. Mekh. 12, 45–49.
Grigolyuk EI and Kulikov PP (1986), Modern method of designing pneumatic tires, Summary of Documents of the II All-Union Scientific-Technical Conf, Moscow.
Cho KN , Bert CW, and Striz AG (1991), Free vibrations of laminated rectangular plates analyzed by higher order individual-layer theory, J. Sound Vib. 145, 429–442.
Robbins Jr. DH and Reddy JN (1993), Modeling of thick composites using a layer-wise theory, Int. J. Numer. Methods Eng. 36, 655–677.
Ambartsumian SA (1958), On a theory of bending of anisotropic plates, Investiia Akad Nauk SSSR, Ot Tekh Nauk, No. 4.
Ambartsumian SA (1958), On a general theory of anisotropic shells, Prikl. Mat. Mekh. 22(2), 226–237.
Reissner E (1984), On a certain mixed variational theory and a proposed application, Int. J. Numer. Methods Eng. 20, 1366–1368.
Ren JG (1986), A new theory of laminated plates, Compos. Sci. Technol. 26, 225–239.
Ren JG (1986), Bending theory of laminated plates, Compos. Sci. Technol. 27, 225–248.
Ren JG and Owen DRJ (1989), Vibration and buckling of laminated plates, Int. J. Solids Struct. 25, 95–106.
Kraus H (1967), Thin Elastic Shells, John Wiley, NY.
Carrera E (1991), The Effects of shear deformation and curvature on buckling and vibrations of cross-ply laminated composite shells, J. Sound Vib. 151, 405–433.
Ambartsumian SA (1957), Analysis of two-layer orthotropic shells, Investiia Akad Nauk SSSR, Ot Tekh Nauk, No. 7.
Ambartsumian SA (1957), Two analysis method for two-layer orthotropic shells, Izv An Arm SSR Seiya Fiz-Matem naukX(2).
Ostermik ES and Barg YaA (1964), Industrial computing method for multi-layers anisotropic plates, Trudy konf. Izd. AN. Arm. SSR.
Piskunov VG , Gurtovoi AG, and Sipetov VS (1984), Improvements of theory of anisotropic plates, Prikl. Mekh. 20, 82–87.
Piskunov VG and Rasskazov AA (1998), Investigation of stress-strained state of tapered orthotropic shells and plates on the basis of second order shear theory, Prikl. Mekh. 20, 82–87.
Teregulov AG (1970), On the theory of multilayered anisotropic shells, Inv. Theory of Plates and Shells, No 6–7, Izd. Kaz., Un., Kazan.
Grigorenko YaM and Vasilenko AT (1977), Taking account of non-uniformity of transverse displacements deformation in the thickness of layered shells, Prikl. Mekh. 13, 36–42.
Andreev AN and Nemirovoskii YuV (1978), A variation of the theory of elastic multilayer anisotropic plates, Prikl. Mekh. 14, 55–62.
Grikolyuk EI and Vasilenko AT (1992), Problems of the statics of anisotropic shells with finite shear stiffness, Nauk Dumka, Moskow.
Prusakov AP (1971), Finite deflections of multilayered shallow shells, Izv Aka Nauk SSSR, Mech Tverd Tela, No 3.
Prusakov AP (1971), Nonlinear bending equations of shallow multilayered shells, Prikl. Mekh. 7(3), 3–8.
Rybov AF (1964), Fundamental equations of the theory of multilayered shells taking account of transverse shear strain, Strength of Mat and Th of Struct, No 3, Budivelnik, Kiev.
Rybov AF (1967), On the theory multilayered shell shells with filler, Air Force Construction and Air Force Eng No 11, Izd Khakosvsk Univ, Kharkov.
Rasskazov AO (1976), Theory of multilayer orthotropic shallow shells, Prikl. Mekh. 12, 50–76.
Rasskazov AO (1977), Vibration theory of multilayer orthotropic shells, Prikl. Mekh. 13, 23–29.
Rasskazov AO (1978), Calculation of multilayer orthotropic shallow shells by the method of finite element, Prikl. Mekh. 14, 51–56.
Rasskazov AO (1978), Stability of multilayer orthotropic shells, Prikl. Mekh. 14, 62–66.
Rasskazov AO , Karpilovskii VS, Iosenko VI, and Kharchenko NG (1986), Analysis of multilayered orthotropic shells of revolution with finite shear stiffness, Prikl. Mekh. 24, 24–28.
Rasskazov AO and Burygina NG (1986), Refinement of shear theory of laminated orthotropic sloping shells, Prikl. Mekh. 24, 32–37.
Grikolyuk EI and Vasilenko AT (1981), Theory of shells of variables thickness, Methods of Shell Design4, Nauk Dumka, Kiev.
Grikolyuk EI and Vasilenko AT (1987), Statics of anisotropic shells with finite shear stiffness, Nauk Dumka, Kiev.
Vasilenko AT (1986), Allowance of transverse compression in problems of the static of laminated shells, Prikl. Mekh. 13, 28–36.
Whitney JM (1969), The effects of transverse shear deformation on the bending of laminated plates, J. Compos. Mater. 3, 534–547.
Sun CT and Whitney JM (1973), On the theories for the dynamic response of laminated plates, AIAA J. 11, 372–398.
Hsu TM and Wang JTS (1970), A theory of laminated cylindrical shells consisting of layers of orthotropic laminae, AIAA J. 8, 2141–2146.
Hsu T and Wang JTS (1971), Rotationally symmetric vibrations of orthotropic layered cylindrical shells, J. Sound Vib. 16, 473–487.
Yi-Yuan Y (1959), A new theory of elastic sandwich plates one dimensional case, ASME J. Appl. Mech. 37, 1031–1036.
Chou PC and Carleone J (1973), Transverse shear in laminated plates theories, AIAA J. 11, 1333–1336.
Disciuva M (1985), A refinement of the transverse shear deformation theory for multilayered plates, l’Aerotecnica Missili e Spazio 63, 84–92.
Disciuva M, Cicorello A, and Dalle Mura E (1985), A class of multilayered anisotropic plate elements including the effects of transverse shear deformability, AIDAA Conf, Torino, 877–892.
Disciuva M (1987), An improved shear deformation theory for moderately thick multilayered anisotropic shells and plates, ASME J. Appl. Mech. 54, 589–596.
Cho M and Parmerter RR (1993), Efficient higher order composite plate theory for general lamination configurations, AIAA J. 31, 1299–1305.
Bhashar B and Varadan TK (1989), Refinement of higher-order laminated plate theories, AIAA J. 27, 1830–1831.
Savithri S and Varadan TK (1990), Refinement of higher-order laminated plate theories, AIAA J. 28, 1842–1843.
Lee KH , Senthilnathan NR, Lim SP, and Chow ST (1990), An improved zig-zag model for the bending analysis of laminated composite plates, Compos. Struct. 15, 137–148.
Vlasov BF (1957), On the equations of bending of plates, Dokla Ak Nauk Azerbeijanskoi-SSR 3, 955–979.
Reddy JN (1984), A simple higher order theory for laminated composite plates, ASME J. Appl. Mech. 51, 745–752.
Soldatos KP and Timarci T (1993), A unified formulation of laminated composites, shear deformable, five-degrees-of-freedom cylindrical shell theories, Compos. Struct. 25, 165–171.
Timarci T and Soldatos KP (1995), Comparative dynamic studies for symmetric cross-ply circular cylindrical shells on the basis a unified shear deformable shell theories, J. Sound Vib. 187, 609–624.
Lee D and Waas AM (1996), Stability analysis of rotating multilayer annular plate with a stationary frictional follower load, Int. J. Mech. Sci. 39, 1117–1138.
Lee D , Waas AM, and Karno BH (1997), Analysis of rotating multilayer annular plate modeled via a layer-wise zig-zag theory: free vibration and transient analysis, Compos. Struct. 66, 313–335.
Iblidi A , Karama M, and Touratier M (1997), Comparison of various laminated plate theories, Compos. Struct. 37, 173–184.
Aitharaju VR and Averill RC (1999), C0 zig-zag kinematic displacement models for the analysis of laminated composites, Mech. of Compos. Mat. and Struct. 6, 31–56.
Cho YB and Averill RC (2000), First order zig-zag sub-laminate plate theory and finite element model for laminated composite and sandwich panels, Compos. Struct. 50, 1–15.
Polit O and Touratier M (2000), Higher order triangular sandwich plate finite elements for linear and nonlinear analyses, Comput. Methods Appl. Mech. Eng. 185, 305–324.
Reissner E (1986), On a mixed variational theorem and on a shear deformable plate theory, Int. J. Numer. Methods Eng. 23, 193–198.
Murakami H (1985), Laminated composite plate theory with improved in-plane responses, ASME Proc of PVP Conf, New Orleans, June 24–26, PVP-Vol 98-2, 257–263.
Murakami H (1986), Laminated composite plate theory with improved in-plane response, ASME J. Appl. Mech. 53, 661–666.
Toledano A and Murakami H (1987), A high-order laminated plate theory with improved in-plane responses, Int. J. Solids Struct. 23, 111–131.
Carrera E (1996), C0 Reissner-Mindlin multilayered plate elements including zig-zag and interlaminar stresses continuity, Int. J. Numer. Methods Eng. 39, 1797–1820.
Carrera E (1997), An improved Reissner-Mindlin-Type model for the electromechanical analysis of multilayered plates including piezo-layers, J. Intell. Mater. Syst. Struct. 8, 232–248.
Carrera E and Kro¨plin B (1997), Zig-Zag and interlaminar equilibria effects in large deflection and post-buckling analysis of multilayered plates, Mech. of Compos. Mat. and Struct. 4, 69–94.
Carrera E (1998), Evaluation of layer-wise mixed theories for laminated plates analysis, AIAA J. 36, 830–839.
Carrera E (1998), Layer-wise mixed models for accurate vibration analysis of multilayered plates, ASME J. Appl. Mech. 65, 820–828.
Carrera E (1999), A Reissner’s mixed variational theorem applied to vibrational analysis of multilayered shell, ASME J. Appl. Mech. 66(1), 69–78.
Carrera E (1999), Multilayered shell theories accounting for a layer-wise mixed description. Part I Governing equations, Part II Numerical evaluations, AIAA J. 37, 1117–1124.
Carrera E (1999), Transverse normal stress effects in multilayered plates, ASME J. Appl. Mech. 66, 1004–1012.
Carrera E (1999), A study of transverse normal stress effects on vibration of multilayered plates and shells, J. Sound Vib. 225, 803–829.
Carrera E (2000), Single-layer vs multi-layers plate modelings on the basis of Reissner’s mixed theorem, AIAA J. 38, 342–343.
Carrera E (2000), A priori vs a posteriori evaluation of transverse stresses in multilayered orthotropic plates, Compos. Struct. 48, 245–260.
Bhaskar K and Varadan TK (1992), Reissner’s new mixed variational principle applied to laminated cylindrical shells, ASME J. Pressure Vessel Technol. 114, 115–119.
Jing H and Tzeng KG (1993), Refined shear deformation theory of laminated shells, AIAA J. 31, 765–773.
Rao KM and Meyer-Piening HR (1990), Analysis of thick laminated anisotropic composites plates by the finite element method, Compos. Struct. 15, 185–213.
Carrera E and Demasi L (2002), Classical and advanced multilayered plate elements based upon PVD and RMVT, Part I. Derivation of finite element matrices, Int. J. Numer. Methods Eng. 55, 191–231, Part II. Numerical implementations, 253–291.
Bhaskar K and Varadan TK (1991), A higher-order theory for bending analysis of laminated shells of revolution, Compos. Struct. 40, 815–819.
Brank B and Carrera E (2000), Multilayered shell finite element with interlaminar continuous shear stresses: A refinement of the Reissner-Mindlin formulation, Int. J. Numer. Methods Eng. 48, 843–874.
Toledano A and Murakami H (1987), A composite plate theory for arbitrary laminated configurations, ASME J. Appl. Mech. 54, 181–189.
Gurtovoi AG and Piskunov VG (1998), Comparative analysis of refined models for layered orthotropic plate, Int., Appl. Mech. 34, 69–74.