Fused deposition modelling (FDM) of composites of graphene nanoplatelets and polymers for high thermal conductivity: a mini-review
Tóm tắt
Composites of polymers and the graphene family of 2D materials continue to attract great interest due their potential to dissipate heat, thus extending the in-service life of electronic and other devices. Such composites can be 3D printed using Fused Deposition Modelling into complex bespoke structures having enhanced properties, including thermal conductivity in different directions. While there are controversial opinions on the limitations of FDM for large-scale and high volume production (e.g. long production times, and expensive printers required), FDM is an innovative solution to the manufacture of small objects where effective thermal management is required and it is a valid alternative for the manufacture of (micro)-electronic components. There are few papers published on the FDM of functional composite materials based on graphene(s). In this mini-review, we describe the many technical challenges that remain to successful printing of these composites by FDM, including orientation effects, void formation, printing and feeding rates, nozzle and printing bed temperatures and the role each has in determining the thermal conductivity of any composite product made by FDM. We also compare these initial reports with those on FDM of other and related carbonaceous fillers, such as multi-walled carbon nanotubes and carbon fibre.
Tài liệu tham khảo
D. Akinwande, N. Petrone, J. Hone, Nat. Commun. 5 (2014)
H.Y. Chang, S.X. Yang, J.H. Lee, et al., ACS Nano 7, 6 (2013)
S. Das, R. Gulotty, A.V. Sumant, et al., Nano Lett. 14, 5 (2014)
G.H. Lee, Y.J. Yu, X. Cui, et al., ACS Nano 7, 9 (2013)
J. Lee, T.J. Ha, H.F. Li, et al., ACS Nano 7, 9 (2013)
V. Guerra, C.Y. Wan, T. McNally, Prog. Mater. Sci. 100 (2019)
W. Zhou, S. Qi, H. Li, et al., Thermochim. Acta 452, 1 (2007)
S.G. Mosanenzadeh, H.E. Naguib, Compos. Part B-Eng. 85 (2016)
S. Dul, L. Fambri, A. Pegoretti, Composites Part A-Appl. Sci. Manufacturing 85 (2016)
X.J. Wei, D. Li, W. Jiang, et al., Sci. Rep. 5 (2015)
R.D. Farahani, M. Dube, D. Therriault, Adv. Mater. 28, 28 (2016)
S. Shaffer, K.J. Yang, J. Vargas, et al., Polymer 55, 23 (2014)
S.H. Masood, W.Q. Song, Mater. Des. 25, 7 (2004)
M. Nikzad, S.H. Masood, I. Sbarski, Mater. Des. 32, 6 (2011)
A. de Leon, Q.Y. Chen, N.B. Palaganas, et al., React. Funct. Polym. 103 (2016)
S.Y. Wu, C. Yang, W.Y. Hsu, et al., Microsyst. Nanoengineering 1 (2015)
R.D. Sochol, E. Sweet, C.C. Glick, et al., Microelectron. Eng. 189 (2018)
K. Fu, Y.G. Yao, J.Q. Dai, et al., Adv. Mater. 29, 9 (2017)
H. Ota, S. Emaminejad, Y.J. Gao, et al., Adv. Mat. Technol. 1, 1 (2016)
X.Y. Tian, T.F. Liu, C.C. Yang, et al., Composites Part A-Appl. Sci. Manufacturing 88 (2016)
C. Yang, X. Tian, D. Li, et al., J. Mater. Process. Technol. 248 (2017)
A.W. Gebisa, H.G. Lemu, Materials 11, 4 (2018)
S. Hansch, R. Socher, D. Pospiech, et al., Compos. Sci. Technol. 72, 14 (2012)
K.B. Nie, X.J. Wang, L. Xu, et al., Mater. Des. 36 (2012)
T. Sakai, Polimery 58, 11–12 (2013)
T. Villmow, P. Potschke, S. Pegel, et al., Polymer 49, 16 (2008)
A.K. Naskar, J.K. Keum, R.G. Boeman, Nat. Nanotechnol. 11, 12 (2016)
A.J. McNamara, Y. Joshi, Z.M.M. Zhang, Int. J. Therm. Sci. 62 (2012)
E. Bassoli, A. Gatto, L. Iuliano, et al., Rapid Prototyp. J. 13, 3 (2007)
W. Zhong, F. Li, Z. Zhang, et al., Mater. Sci. Eng. A 301, 2 (2001)
T. Ramanathan, A.A. Abdala, S. Stankovich, et al., Nat. Nanotechnol. 3, 6 (2008)
T. Ramanathan, S. Stankovich, D.A. Dikin, et al., J. Polymer Sci. Part B-Polymer Phys. 45, 15 (2007)
S. Vadukumpully, J. Paul, N. Mahanta, et al., Carbon 49, 1 (2011)
C. Heo, H.G. Moon, C.S. Yoon, et al., J. Appl. Polym. Sci. 124, 6 (2012)
Q.F. Xu, B. Mondal, A.M. Lyons, ACS Appl. Mater. Interfaces 3, 9 (2011)
M. Faes, H. Valkenaers, F. Vogeler, et al., in 3rd Cirp Global Web Conference - Production Engineering Research Advancement beyond State of the Art, ed. by A. Caggiano, vol 28 (2015), p. 76
H.W. Lin, C.P. Chang, WH Hwu et al. J. Mater. Process. Technol. 197, 1–3 (2008)
S.M. Lebedev, O.S. Gefle, E.T. Amitov, et al., Polym. Test 58 (2017)
K. Gnanasekaran, T. Heijmans, S. van Bennekom, et al., Appl. Mater. Today 9 (2017)
Y.C. Jia, H. He, Y. Geng, et al., Compos. Sci. Technol. 145 (2017)
C. Shemelya, A. De La Rosa, A.R. Torrado, et al., Addit. Manuf. 16 (2017)
E. Pop, V. Varshney, A.K. Roy, MRS Bull. 37, 12 (2012)
J.D. Renteria, D.L. Nika, A.A. Balandin, Appl. Sci.-Basel 4, 4 (2014)
A.A. Balandin, Nat. Mater. 10, 8 (2011)
J.W. Jiang, B.S. Wang, J.S. Wang, et al., J. Phys. Condens. Matter 27, 8 (2015)
G. Chen, Int. J. Therm. Sci. 39, 4 (2000)
C. Yuan, B. Xie, M. Huang, et al., Int. J. Heat Mass Transf. 94 (2016)
P. Zhao, K. Wang, H. Yang, et al., Polymer 48, 19 (2007)
E.T. Thostenson, T.W. Chou, J. Phys. D-Appl. Phys. 35, 16 (2002)
D. Zhang, B.H. Chi, B.W. Li, et al., Synth. Met. 217 (2016)
D.C. Zhu, Y.Y. Ren, G.X. Liao, et al., J. Appl. Polym. Sci. 134, 39 (2017)
G. Liao, Z. Li, Y. Cheng, et al., Mater. Des. 139 (2018)
A. Dorigato, V. Moretti, S. Dul, et al., Synth. Met. 226 (2017)
R. Singh, G.S. Sandhu, R. Penna, et al., Materials 10, 8 (2017)
B.G. Compton, B.K. Post, C.E. Duty, et al., Addit. Manuf. 17 (2017)
O.S. Carneiro, A.F. Silva, R. Gomes, Mater. Des. 83 (2015)
N. Burger, A. Laachachi, M. Ferriol, et al., Prog. Polym. Sci. 61 (2016)
L.J. Love, V. Kunc, O. Rios, et al., J. Mater. Res. 29, 17 (2014)
Y. Zhuang, W.T. Song, G. Ning, et al., Mater. Des. 126 (2017)
J. Jyoti, S. Basu, B.P. Singh, et al., Composites Part B-Engineering 83 (2015)
G. Postiglione, G. Natale, G. Griffini, et al., Composites Part A-Appl. Sci. Manufacturing 76 (2015)
S.J. Leigh, R.J. Bradley, C.P. Purssell, et al., PLoS One 7, 11 (2012)
J. Czyzewski, P. Burzynski, K. Gawel, et al., J. Mater. Process. Technol. 209, 12–13 (2009)
J.F. Christ, C.J. Hohimer, N. Aliheidari, et al., in Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2017, ed. by J. P. Lynch, vol 10168 (2017)
X.H. Yao, C.C. Luan, D.M. Zhang, et al., Mater. Des. 114 (2017)
JM Gardner, G Sauti, JW Kim et al., Additive Manufacturing 12, (2016)
W.W. Yu, J. Zhang, J.R. Wu, et al., J. Appl. Polym. Sci. 134, 15 (2017)
D.P. Schmitz, L.G. Ecco, S. Dul, et al., Materials Today Communications 15 (2018)
C.W. Foster, M.P. Down, Y. Zhang, et al., Sci. Rep. 7 (2017)
V.B. Mohan, B.J. Krebs, D. Bhattacharyya, Materials Today Communications 17 (2018)
G Tsiakatouras, E Tsellou, and C Stergiou, 12, (2014)
R. Matsuzaki, M. Ueda, M. Namiki, et al., Sci. Rep. 6 (2016)
M.L. Shofner, K. Lozano, F.J. Rodriguez-Macias, et al., J. Appl. Polym. Sci. 89, 11 (2003)
M. Plymill, Greeley, et al., University of Tennessee Honors Thesis Projects (2016)
F.D. Ning, W.L. Cong, J.J. Qiu, et al., Composites Part B-Engineering 80 (2015)
T. Hofstätter, W.I. Gutmann, T. Koch, et al., Proceedings of ASPE Summer Topical Meeting 2016: Dimensional Accuracy and Surface Finish in Additive Manufacturing ASPE – The American Society for Precision Engineering (2016)
H.L. Tekinalp, V. Kunc, G.M. Velez-Garcia, et al., Compos. Sci. Technol. 105 (2014)
W.F. Hao, Y. Liu, H. Zhou, et al., Polym. Test. 65 (2018)
N.Y. Li, Y.G. Li, S.T. Liu, J. Mater. Process. Technol. 238 (2016)
B.G. Compton, J.A. Lewis, Adv. Mater. 26, 34 (2014)
K. Fvd, Y. Koga, A. Todoroki, et al., Open J. Compos. Mater. 6 (2016)
K.I. Mori, T. Maeno, Y. Nakagawa, in 11th International Conference on Technology of Plasticity, Ictp 2014, ed. by T. Ishikawa, K. I. Mori, vol 81 (2014), p. 1595
X.Y. Tian, T.F. Liu, Q.R. Wang, et al., J. Clean. Prod. 142 (2017)
J. Bustillos, D. Montero, P. Nautiyal, et al., Polym. Compos. 39, 11 (2018)
T.F. Liu, X.Y. Tian, M.Y. Zhang, et al., Composites Part A-Appl. Sci. Manufacturing 114 (2018)
S. Berretta, R. Davies, Y.T. Shyng, et al., Polym. Test. 63 (2017)
J. Justo, L. Tavara, L. Garcia-Guzman, et al., Compos. Struct. 185 (2018)
Q.Y. Chen, J.D. Mangadlao, J. Wallat, et al., ACS Appl. Mater. Interfaces 9, 4 (2017)
D.G. Papageorgiou, M.F. Liu, Z.L. Li, et al., Compos. Sci. Technol. 175 (2019)
N. Kumar, P.K. Jain, P. Tandon, et al., J. Braz. Soc. Mech. Sci. Eng. 40, 4 (2018)
K. Prashantha, F. Roger, J. Macromol. Sci. Part A-Pure Appl. Chem. 54, 1 (2017)
S. Dul, L. Fambri, A. Pegoretti, Nanomaterials 8, 1 (2018)
T. Batakliev, V. Georgiev, E. Ivanov, et al., J. Appl. Polym. Sci. 136, 13 (2019)