Experimental characterization and constitutive modeling of the non-linear stress–strain behavior of unidirectional carbon–epoxy under high strain rate loading
Tóm tắt
Từ khóa
Tài liệu tham khảo
Vogler M, Rolfes R, Camanho PP. Modeling the inelastic deformation and fracture of polymer composites-part I: plasticity model. Mech Mater. 2013;59:50–64. https://doi.org/10.1016/j.mechmat.2012.12.002 .
Koerber H, Xavier J, Camanho PP. High strain rate characterisation of unidirectional carbon–epoxy IM7-8552 in transverse compression and in-plane shear using digital image correlation. Mech Mater. 2010;42(11):1004–19. https://doi.org/10.1016/J.MECHMAT.2010.09.003 .
Koerber H, Camanho PP. High strain rate characterisation of unidirectional carbon–epoxy im7-8552 in longitudinal compression. Compos Part A Appl Sci Manuf. 2011;42(5):462–70. https://doi.org/10.1016/j.compositesa.2011.01.002 .
Ploeckl M, Kuhn P, Grosser J, Wolfahrt M, Koerber H. A dynamic test methodology for analyzing the strain-rate effect on the longitudinal compressive behavior of fiber-reinforced composites. Compos Struct. 2017;180:429–38. https://doi.org/10.1016/j.compstruct.2017.08.048 .
Kuhn P, Catalanotti G, Xavier J, Camanho PP, Koerber H. Fracture toughness and crack resistance curves for fiber compressive failure mode in polymer composites under high rate loading. Compos Struct. 2017;182:164–75. https://doi.org/10.1016/j.compstruct.2017.09.040 .
Gerlach R, Kettenbeil C, Petrinic N. A new split hopkinson tensile bar design. Int J Impact Eng. 2012;50:63–7. https://doi.org/10.1016/j.ijimpeng.2012.08.004 .
Koerber H, Xavier J, Camanho PP, Essa YE, de la Escalera FM. High strain rate behaviour of 5-harness-satin weave fabric carbon epoxy composite under compression and combined compression shear loading. Int J Solids Struct. 2015;54:172–82. https://doi.org/10.1016/j.ijsolstr.2014.10.018 .
Gray GT III. Classic split-Hopkinson pressure bar testing. In: Kuhn H, Medlin D, editors. ASM handbook vol 8 mechanical testing and evaluation. Russell: ASM Int; 2000. p. 462–76.
Kuhn P, Ploeckl M, Koerber H. Experimental investigation of the failure envelope of unidirectional carbon–epoxy composite under high strain rate transverse and off-axis tensile loading. EPJ Web Conf. 2015;94:01040. https://doi.org/10.1051/epjconf/20159401040 .
Hexcel: HexPly R 8552-Product Data Sheet—EU Version. 2016.
Vogler M, Ernst G, Rolfes R. Invariant based transversely-isotropic material and failure model for fiber-reinforced polymers. Compute Mater Contin. 2010;16(1):25–49.
Gilat A, Goldberg RK, Roberts GD. Experimental study of strain-rate-dependent behavior of carbon/epoxy composite. Compos Sci Technol. 2002;62(10–11):1469–76. https://doi.org/10.1016/S0266-3538(02)00100-8 .
Taniguchi N, Nishiwaki T, Kawada H. Tensile strength of unidirectional CFRP laminate under high strain rate. Adv Compos Mater. 2007;16(2):167–80. https://doi.org/10.1163/156855107780918937 .
Lifshitz JM, Leber H. Response of fiber-reinforced polymers to high strain-rate loading in interlaminar tension and combined tension/shear. Compos Sci Technol. 1998;58(6):987–96. https://doi.org/10.1016/S0266-3538(97)00226-1 .
Hsiao HM, Daniel IM, Cordes RD. Strain rate effects on the transverse compressive and shear behavior of unidirectional composites. J Compos Mater. 1999;33(17):1620–42. https://doi.org/10.1177/002199839903301703 .
Hosur MV, Alexander J, Vaidya UK, Jeelani S. High strain rate compression response of carbon/epoxy laminate composites. Compos Struct. 2001;52(3–4):405–17. https://doi.org/10.1016/S0263-8223(01)00031-9 .
Bing Q, Sun CT. Modeling and testing strain rate-dependent compressive strength of carbon/epoxy composites. Compos Sci Technol. 2005;65(15–16):2481–91. https://doi.org/10.1016/J.COMPSCITECH.2005.06.012 .
Naik NK, Asmelash A, Kavala VR, Ch V. Interlaminar shear properties of polymer matrix composites: strain rate effect. Mech Mater. 2007;39(12):1043–52. https://doi.org/10.1016/J.MECHMAT.2007.05.003 .
Wiegand J. Constitutive modelling of composite materials under impact engineering science. Oxford: University of Oxford; 2008.
Koerber H. Mechanical response of advanced composites under high strain rates. Ph.D. thesis, Faculdade de Engenharia da Universidade do Porto, Departamento de Engenharia Mecanica. 2010.
Vogler M. Anisotropic material models for fiber reinforced polymers. Ph.D. thesis, Mitteilungen des Instituts für Statik und Dynamik der Leibniz Universität Hannover. 2012.
Perzyna P. The constitutive equations for rate sensitive plastic materials. Q Appl Math. 1963;20(4):321–32. https://doi.org/10.2307/43636430 .
Maugin GA. The thermomechanics of plasticity and fracture. Cambridge: Cambridge University Press; 1992. https://doi.org/10.1017/CBO9781139172400 .
Camanho PP, Arteiro A, Melro AR, Catalanotti G, Vogler M. Three-dimensional invariant-based failure criteria for fibre-reinforced composites. Int J Solids Struct. 2015;55:92–107. https://doi.org/10.1016/j.ijsolstr.2014.03.038 .
Catalanotti G, Camanho PP, Marques AT. Three-dimensional failure criteria for fiber-reinforced laminates. Compos Struct. 2013;95:63–79. https://doi.org/10.1016/j.compstruct.2012.07.016 .
Camanho PP, Lambert M. A design methodology for mechanically fastened joints in laminated composite materials. Compos Sci Technol. 2006;66(15):3004–20. https://doi.org/10.1016/j.compscitech.2006.02.017 .
Sun CT, Chen JL. A simple flow rule for characterizing nonlinear behavior of fiber composites. J Compos Mater. 1989;23(10):1009–20. https://doi.org/10.1177/002199838902301004 .