Evaluation of wheel life by grinding ratio and static force

Springer Science and Business Media LLC - Tập 16 - Trang 1072-1077 - 2002
Jae-Seob Kwak1, Man-Kyung Ha1
1School of Mechanical Engineering, Pukyong National University, Busan, Korea

Tóm tắt

A degree of sharpness in wheel grains affects the surface roughness and dimensional accuracy in the grinding process. If a wheel with dull grains is used, the grinding force is increased and the surface roughness is deteriorated. In ovder to produce a precision component economically, the magnitude of the wear amount in the grinding wheel has to be limited. In this study, experimental evaluation of a wheel life varying with the grinding ratio and static grinding force was conducted. The grinding ratio and grinding force were measured to seek the grinding performance of the WA wheel. The relationship between the grinding ratio and static grinding force was presented.

Tài liệu tham khảo

Kwak, J. S. and Song, J. B., 2000, “Estimation of the Ground Surface Roughness Applied by Acoustic Emission Signal,”Korea Society of Precision Engineering, Vol. 14, No. 4, pp. 240–246.

Lee, S. T. and Jung, Y. K., 2000, “A Study on Determination of Wheel Life Using Grinding Power in Cylindrical Grinding,”Journal of the KSMTE, Vol. 9, No. 4, pp. 62–67.

Malkin, S., 1989,Grinding Technology: Theory and Applications of Machining with Abrasive, John Wiley & Sons, New York, pp. 216–217.

Park, J. C., Park, C. W. and Lee, S. J., 1999, “Monitoring of Grinding Force in Plunge Grinding Process,”Transactions of the KSME, Vol. 23, pp. 881–894.

Seo, Y. L., Lee, J. C., Her, M. S., Choi, H. and Cheong, S. H., 1999, “A Study on the Grinding Force Characteristics in the Internal Plunge Grinding,”Journal of the KSPE, Vol. 16, No. 16, pp. 54–59.

Thông tin
Thông tin xuất bản

Springer Science and Business Media LLC

Tập 16

1072-1077

Thông tin tác giả