Evaluation of the use of marble waste in hydrated lime cement mortar based

Turk J, Cotic Z, Mladenovic A, Sajna A (2015) Environmental evaluation of green concretes versus conventional concrete by means of LCA. Waste Manag 45:194–205

Vieira LBP, Figueiredo AD (2016) Evaluation of concrete recycling system efficiency for ready-mix concrete plants. Waste Manag 56:337–351

Xu S, Wang J, Jiang Q, Zhang S (2016) Study of natural hydraulic lime-based mortars prepared with masonry waste powder as aggregate and diatomite/fly ash as mineral admixtures. J Clean Prod 119:118–127

Na O, Xi Y (2017) Mechanical and durability properties of insulation mortar with rubber powder from waste tires. J Mater Cycles Waste Manag 19:763–773

Kim HS, Kim B, Kim KS, Kim JM (2017) Quality improvement of recycled aggregates using the acid treatment method and the strength characteristics of the resulting mortar. J Mater Cycles Waste Manag 19:968–976

Lim LK, Kuo TM, Hsu YS (2016) The application and evaluation research of coffee residue ash into mortar. J Mater Cycles Waste Manag 18:541–551

Palomar I, Barluenga G, Puentes J (2015) Lime–cement mortars for coating with improved thermal and acoustic performance. Constr Build Mater 75:306–314

Cuadrado JG, Rodríguez A, Cuesta II, Caldéron V, González SG (2017) Study and analysis by means of surface response to fracture behavior in lime–cement mortars fabricated with steelmaking slags. Constr Build Mater 138:204–213

Schneemayer A, Schranz C, Kolbitsch A, Tschegg EK (2017) Fracture-mechanical properties of mortar-to-brick interfaces. J Mater Civ Eng 26(9):04014060

Silva BA, Pinto APF, Gomes A (2014) Influence of natural hydraulic lime content on the properties of aerial lime-based mortars. Constr Build Mater 72:208–218

Cho JS, Moon KY, Chol MK, Cho JW, Yeon KS (2017) Performance improvement of local Korean natural hydraulic lime-based mortar using inorganic by-products. Korean J Chem Eng 34(5):1385–1392

George PAO, Gutiérrez AS, Martínez JBC, Vandecasteele C (2010) Cleaner production in a small lime factory by means of process control. J Clean Prod 18:1171–1176

Dowling A, O’Dwyer J, Adley CC (2015) Lime in the limelight. J Clean Prod 92:13–22

Stefanidou M, Anastasiou E, Filikas KG (2014) Recycled sand in lime-based mortars. Waste Manag 34:2595–2602

Singh M, Choudhary K, Srivastava A, Sangwan KS, Bhunia D (2017) A study on environmental and economic impacts of using waste marble powder in concrete. J Build Eng 13:87–95

Dantas APA, Acchar W, Leite JYP, Araújo FSD (2010) Utilização de resíduos de rochas ornamentais na produção de cerâmica branca. Holos Ano 26(1):92–108

Buyuksagis IS, Uygunoglu T, Tatar E (2017) Investigation on the usage of waste marble powder in cement-based adhesive mortar. Constr Build Mater 154:734–742

Corinaldesi V, Moriconi G, Naik TR (2010) Characterization of marble powder for its use in mortar and concrete. Constr Build Mater 24:113–117

Ergun A (2011) Effects of the usage of diatomite and waste marble powder as partial replacement of cement on the mechanical properties of concrete. Constr Build Mater 25:806–812

Vardhan K, Goyal S, Siddique R, Singh M (2015) Mechanical properties and microstructural analysis of cement mortar incorporating marble powder as partial replacement of cement. Constr Build Mater 96:615–621

Rana A, Kalla P, Csetenyi LJ (2015) Sustainable use of marble slurry in concrete. J Clean Prod 94:304–311

Arel HS (2016) Recyclability of waste marble in concrete production. J Clean Prod 131:179–188

Gutiérrez AS, Caneglen JV, Martínez JBC, Vandecasteele C (2012) Evaluation of the environmental performance of lime production in Cuba. J Clean Prod 31:126–136

Associação Brasileira de Normas Técnicas (2012) Materiais pozolânicos – Determinação de atividade pozolânica com cimento Portland – Índice de atividade pozolânica com cimento: NBR 5752. Rio de Janeiro

Associação Brasileira de Normas Técnicas (2016) Argamassa para assentamento e revestimento de paredes e tetos – Preparo da mistura e determinação do índice de consistência: NBR 13276. Rio de Janeiro

Associação Brasileira de Normas Técnicas (2010) Argamassa de assentamento e revestimento de paredes e tetos – Caracterização reológica pelo método squeeze-flow: NBR 15839. Rio de Janeiro

Azevedo ARG, Alexandre J, Zanelato EB, Marvila MT (2017) Influence of incorporation of glass waste on the rheological properties of adhesive mortar. Constr Build Mater 148:359–368

Associação Brasileira de Normas Técnicas (2005) Argamassa para assentamento e revestimento de paredes e tetos – Determinação da resistência à tração na flexão e à compressão: NBR 13279. Rio de Janeiro

Associação Brasileira de Normas Técnicas (2005) Argamassa para assentamento e revestimento de paredes e tetos – Determinação da retenção de água: NBR 13277. Rio de Janeiro

Haach VG, Carrazedo R, Oliveira LMF (2017) Resonant acoust evaluation of mechanical properties of masonry mortars. Constr Build Mater 152:494–505

Associação Brasileira de Normas Técnicas (2005) Argamassa para assentamento e revestimento de paredes e tetos – Determinação da absorção de água por capilaridade e do coeficiente de capilaridade: NBR 15259. Rio de Janeiro

Associação Brasileira de Normas Técnicas (2009) Argamassa e concretos endurecidos – Determinação da absorção de água, índice de vazios e massa específica: NBR 9778. Rio de Janeiro

Associação Brasileira de Normas Técnicas (2010) Revestimento de paredes de argamassas inorgânicas – Determinação da resistência de aderência à tração: NBR 13528. Rio de Janeiro

Li J, McDougall SR, Sorbie KS (2017) Dynamic pore-scale network model (PNM) of water imbibition in porous media. Adv Water Resour 107:191–211

Sing KSW, Williams RT (2012) Historical aspects of capillarity and capillary condensation. Microporous Mesoporous Mater 15:16–18