Estimation of the friction force during the needle insertion using the disturbance observer and the recursive least square

Okamura AM, Simone C: Force modeling for needle insertion into soft tissue. IEEE 2004,51(10):1707–1716.

Simone C, Okamura AM: Modeling of Needle Insertion Forces for Robot-Assisted Percutaneous Therapy. IEEE international conference on robotics & automation, Washington, DC, USA; 2002.

Kobayashi Y, Sato T, Fujie MG: Modeling of Friction Force based on Relative Velocity between Liver Tissue and Needle for Needle Insertion Simulation. IEEE International conference on engineering in medicine and biology society, Hilton Minneapolis, Minnesota, USA; 2009.

Kataoka H, Washio T, Chinzei K, Mizuhara K, Simone C, Okamura AM: Measurement of the Tip and Friction Force Acting on a Needle during Penetration. In 5th international conference on medical image computing and computer assisted intervention, vol 2488. Springer, Tokyo, Japan; 2002:216–223.

Washio T, Chinzei K: Needle Force Sensor, Robust and Sensitive Detection of the Instant of Needle Puncuture. 7th international conference medical image computing and computer assisted intervention, Saint Malo, Flance; 2004.

Carra A, Avila-Vilchis JC: Mutilayer Needle Insertion Modeling for Robotic Percutaneous Therapy. 4th international conference on bioinformatics and biomedical engineering, Chengdu, China; 2010.

Umeno T: Parameter estimation by using disturbance observer. J Japan Fluid Power Syst Soc 2009,40(3):169–173.

Barbe L, Bayle B, Mathelin MD, Gangi A (2007) Needle insertion modeling: Identifiability and limitations. In: David F (ed) Proceedings of IFAC, France ᅟ

Barbe L, Bayle B, Mathelin MD, Gangi A: In vivo model estimation and haptic characterization of needle insertion. Int J Robot Res 2009,26(11):1154–1168.

Fukushima Y, Saito K, Naemura K (2013) Estimation of the Cutting Force Using the Dynamic friction coefficient obtained by reaction force during the needle insertion. In: Mamoru M, Paolo B (eds) Proceedings of 1st CIRP international conference on BioManufacturing ᅟ,, Tokyo

Dimaio SP, Salcudean SE: Needle insertion modeling and simulation. IEEE 2003,19(5):864–875.

Fung YC: Biomechanics: Mechanical Properties of Living Tissues. Springer, Berlin; 1993.

Ushiki T: Basic histology. Nankodo, Japan; 1989.

Heverly M, Pierre D, Triedman J: Trajectory Optimization for Dynamic Needle Insertion. IEEE International Conference on Robotics and Automation, Barcelona, Spain; 2005.

Adachi S: Basic of system identification. Tokyo Denki University Press, Japan; 2009.