Effect of tip geometry of atomic force microscope on mechanical responses of bovine articular cartilage and agarose gel

Bhushan, B., “Handbook of Micro/Nanotribology,” CRC Press, p. 628, 1995.

Bhushan, B., “Micro/nanotechnology using atomic force microscopy/friction force microscopy: State of the art,” Proc. of the Institution of Mechanical Engineers, Vol. 212, pp. 1–18, 1995.

Kumar, P., Oka, M., Toguchida, J., Kobayashi, M., Uchida, E., Nakamura, T. and Tanaka, K., “Role of uppermost superficial surface layer of articular cartilage in the lubrication mechanism of joints,” J. of Anatomy, Vol. 199, No. 3, pp. 241–250, 2001.

Kim, H. J. and Kim, D. E., “Nano-scale friction: A review,” Int. J. Pre. Eng. Manuf., Vol. 10, No. 2, pp. 141–151, 2009.

Koinkar, V. N. and Bhushan B., “Microtribological properties of hard amorphous carbon protective coatings for thin-film magnetic disks and heads,” Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, Vol. 211, No. 4, pp. 365–372, 1997.

Kim, S. H., Opdahl, A., Marmo, C. and Somorjai, G. A., “Afm and sfg studies of phema-based hydrogel contact lens surfaces in saline solution: Adhesion, friction, and the presence of non-crosslinked polymer chains at the surface,” Biomaterials, Vol. 23, No. 7, pp. 1657–1666, 2002.

Lee, C. G., Hwang, Y. J., Choi, Y. M., Lee, J. K., Choi, C. and Oh, J. M., “A study on the tribological characteristics of graphite nano lubricants,” Int. J. Prec. Eng. Manuf., Vol. 10, No. 1, pp. 85–90, 2009.

Kim, J. H., Lee, H. K., Choi, B. I., Kang, J. Y. and Oh, C. S., “Mechanical property measurement in nano imprint process,” J. of KSPE, Vol. 21, No. 6, pp. 7–14, 2004.

Dimitriadis, E. K., Horkay, F., Maresca, J., Kachar, B. and Chadwick, R. S., “Determination of elastic moduli of thin layers of soft material using the atomic force microscope,” Biophysical Journal, Vol. 82, No. 5, pp. 2798–2810, 2002.

A-Hassan, E., Heinz, W. F., Antonik, M. D., D’Costa, N. P., Nageswaran, S., Schoenenberger, C. A. and Hoh, J. H., “Relative microelastic mapping of living cells by atomic force microscopy,” Biophysical Journal, Vol. 74, No. 3, pp. 1564–1578, 1998.

Costa, K. D. and Yin, F. C., “Analysis of indentation: Implications for measuring mechanical properties with atomic force microscopy,” J. Biomech. Eng., Vol. 121, No. 5, pp. 462–471, 1999.

Heinz, W. F. and Hoh, J. H., “Spatially resolved force spectroscopy of biological surfaces using the atomic force microscope,” Trends in Biotechnology, Vol. 17, No. 4, pp. 143–150, 1999.

Parbhu, A. N., Bryson, W. G. and Lal, R., “Disulfide bonds in the outer layer of keratin fibers confer higher mechanical rigidity: Correlative nano-indentation and elasticity measurement with an afm,” Biochemistry, Vol. 38, No. 36, pp. 11755–11761, 1999.

Mathur, A. B., Truskey, G. A. and Reichert, W. M., “Atomic force and total internal reflection fluorescence microscopy for the study of force transmission in endothelial cells,” Biophysical Journal, Vol. 78, No. 4, pp. 1725–1735, 2000.

Mathur, A. B., Collinsworth, A. M., Reichert, W. M., Kraus, W. E. and Truskey, G. A., “Endothelial, cardiac muscle and skeletal muscle exhibit different viscous and elastic properties as determined by atomic force microscopy,” Journal of Biomechanics, Vol. 34, No. 12, pp. 1545–1553, 2001.

Collinsworth, A. M., Zhang, S., Kraus, W. E. and Truskey, G. A., “Apparent elastic modulus and hysteresis of skeletal muscle cells throughout differentiation,” American Journal of Physiology-Cell Physiology, Vol. 283, No. 4, pp. C1219–C1227, 2002.

Radmacher, M., “Measuring the elastic properties of living cells by the atomic force microscope. In: Atomic force microscopy in cell biology,” Academic Press, pp. 67–90, 2002.

Braet, F., Rotsch, C., Wisse, E. and Radmacher, M., “Comparison of fixed and living liver endothelial cells by atomic force microscopy,” Applied Physics A: Materials Science & Processing, Vol. 66, No. 1, pp. S575–S578, 1998.

Hengsberger, S., Kulik, A. and Zysset, P., “A combined atomic force microscopy and nanoindentation technique to investigate the elastic properties of bone structural units,” European Cells and Materials, Vol. 1, pp. 12–17, 2001.

Kinney, J. H., Habelitz, S., Marshall, S. J. and Marshall, G. W., “The importance of intrafibrillar mineralization of collagen on the mechanical properties of dentin,” Journal of dental research, Vol. 82, No. 12, pp. 957–961, 2003.

Murakoshi, M., Yoshida, N., Iida, K., Kumano, S., Kobayashi, T. and Wada, H., “Local mechanical properties of mouse outer hair cells: Atomic force microscopic study,” Auris Nasus Larynx, Vol. 33, No. 2, pp. 149–157, 2006.

Lieber, S. C., Aubry, N., Pain, J., Diaz, G., Kim, S. J. and Vatner, S. F., “Aging increases stiffness of cardiac myocytes measured by atomic force microscopy nanoindentation,” American Journal of Physiology. Heart and Circulatory Physiology, Vol. 287, No. 2, pp. 645–651, 2004.

Costa, K. D., “Imaging and probing cell mechanical properties with the atomic force microscope,” Methods in Molecular Biology, Vol. 319, pp. 331–361, 2006.

Guo, S., Hong, L., Akhremitchev, B. B. and Simon, J. D., “Surface elastic properties of human retinal pigment epithelium melanosomes,” Photochemistry Photobiology, Vol. 84, No. 3, pp. 671–678, 2008.

Abu-Lail, N. I. and Camesano, T. A., “The effect of solvent polarity on the molecular surface properties and adhesion of escherichia coli,” Colloids and Surf. B: Biointerfaces, Vol. 51, No. 1, pp. 62–70, 2006.

Patel, R. V. and Mao, J. J., “Microstructural and elastic properties of the extracellular matrices of the superficial zone of neonatal articular cartilage by atomic force microscopy,” Frontiers in Bioscience, Vol. 8, No. pp. 18–25, 2003.

Tomkoria, S., Patel, R. V. and Mao, J. J., “Heterogeneous nanomechanical properties of superficial and zonal regions of articular cartilage of the rabbit proximal radius condyle by atomic force microscopy,” Medical Engineering and Physics, Vol. 26, No. 10, pp. 815–822, 2004.

Simha, N. K., Jin, H., Hall, M. L., Chiravarambath, S. and Lewis, J. L., “Effect of indenter size on elastic modulus of cartilage measured by indentation,” Journal of Biomechanical Engineering-Transactions of the ASME, Vol. 129, No. 5, pp. 767–775, 2007.

Johnson, K. L., “Contact mechanics,” Cambridge University Press, p. 452, 1985.

Stolz, M., Raiteri, R., Daniels, A. U., VanLandingham, M. R., Baschong, W. and Aebi, U., “Dynamic elastic modulus of porcine articular cartilage determined at two different levels of tissue organization by indentation-type atomic force microscopy,” Biophysical Journal, Vol. 86, No. 5, pp. 3269–3283, 2004.

Park, S., Costa, K. D., Ateshian, G. A. and Hong, K. S., “Mechanical properties of bovine articular cartilage under microscale indentation loading from atomic force microscopy,” Proc. IMechE Part H: J. Engineering in Medicine, Vol. 223, No. 3, pp. 339–347, 2009.

Armstrong, C. G., Lai, W. M. and Mow, V. C., “An analysis of the unconfined compression of articular cartilage,” Journal of Biomechanical Engineering, Vol. 106, No. 2, pp. 165–173, 1984.

Ateshian, G. A., Lai, W. M., Zhu, W. B. and Mow, V. C., “An asymptotic solution for the contact of two biphasic cartilage layers,” Journal of Biomechanics, Vol. 27, No. 11, pp. 1347–1360, 1994.

Ateshian, G. A., Wang, H. Q. and Lai, W. M., “The role of interstitial fluid pressurization and surface porosities on the boundary friction of articular cartilage,” Journal of Tribology-Transactions of the ASME, Vol. 120, No. 2, pp. 241–248, 1998.

Huang, C. Y., Mow, V. C. and Ateshian, G. A., “The role of flow-independent viscoelasticity in the biphasic tensile and compressive responses of articular cartilage,” Journal of Biomechanical Engineering, Vol. 123, No. 5, pp. 410–417, 2001.

Huang, C. Y., Soltz, M. A., Kopacz, M., Mow, V. C. and Ateshian, G. A., “Experimental verification of the roles of intrinsic matrix viscoelasticity and tension-compression nonlinearity in the biphasic response of cartilage,” Journal of Biomechanical Engineering, Vol. 125, No. 1, pp. 84–93, 2003.

Soltz, M. A. and Ateshian, G. A., “A conewise linear elasticity mixture model for the analysis of tension-compression nonlinearity in articular cartilage,” Journal of Biomechanical Engineering, Vol. 122, No. 6, pp. 576–586, 2000.

Soltz, M. A. and Ateshian, G. A., “Experimental verification and theoretical prediction of cartilage interstitial fluid pressurization at an impermeable contact interface in confined compression,” Journal of Biomechanics, Vol. 31, No. 10, pp. 927–934, 1998.

Park, S., Hung, C. T. and Ateshian, G. A., “Mechanical response of bovine articular cartilage under dynamic unconfined compression loading at physiological stress levels,” Osteoarthritis Cartilage, Vol. 12, No. 1, pp. 65–73, 2004.

Park, S. and Ateshian, G. A., “Dynamic response of immature bovine articular cartilage in tension and compression, and nonlinear viscoelastic modeling of the tensile response,” Journal of Biomechanical Engineering, Vol. 128, No. 4, pp. 623–630, 2006.

Park, S., Costa, K. D. and Ateshian, G. A., “Microscale frictional response of bovine articular cartilage from atomic force microscopy,” Journal of Biomechanics, Vol. 37, No. 11, pp. 1679–1687, 2004.

Wang, C. C., Deng, J. M., Ateshian, G. A. and Hung, C. T., “An automated approach for direct measurement of two-dimensional strain distributions within articular cartilage under unconfined compression,” Journal of Biomechanical Engineering, Vol. 124, No. 5, pp. 557–567, 2002.

Schinagl, R. M., Gurskis, D., Chen, A. C. and Sah, R. L., “Depth-dependent confined compression modulus of full-thickness bovine articular cartilage,” Journal of Orthopaedic Research, Vol. 15, No. 4, pp. 499–506, 1997.

Klein, T. J., Chaudhry, M., Bae, W. C. and Sah, R. L., “Depth-dependent biomechanical and biochemical properties of fetal, newborn, and tissue-engineered articular cartilage,” Journal of Biomechanics, Vol. 40, No. 1, pp. 182–190, 2007.

Krishnan, R., Park, S., Eckstein, F. and Ateshian, G. A., “Inhomogeneous cartilage properties enhance superficial interstitial fluid support and frictional properties, but do not provide a homogeneous state of stress,” Journal of Biomechanical Engineering, Vol. 125, No. 5, pp. 569–577, 2003.