Effect of flight level to maximum power utilization for PEMFC/supercapacitor hybrid uav with switched reluctance motor thruster

Townsend, 2020, A comprehensive review of energy sources for unmanned aerial vehicles, their shortfalls and opportunities for improvements, Heliyon, 6, 10.1016/j.heliyon.2020.e05285

Zhang, 2022, Overview of propulsion systems for unmanned aerial vehicles, Energies, 15, 455, 10.3390/en15020455

Wang, 2020, Current technologies and challenges of applying fuel cell hybrid propulsion systems in unmanned aerial vehicles, Prog Aero Sci, 116, 10.1016/j.paerosci.2020.100620

Erdinc, 2010, Recent trends in PEM fuel cell-powered hybrid systems: investigation of application areas, design architectures and energy management approaches, Renew Sustain Energy Rev, 14, 2874, 10.1016/j.rser.2010.07.060

Okumus, 2017, Development of boron-based hydrogen and fuel cell system for small unmanned aerial vehicle, Int J Hydrogen Energy, 42, 2691, 10.1016/j.ijhydene.2016.09.009

Bayrak, 2019, Investigation of PEMFC performance for cruising hybrid powered fixed-wing electric UAV in different temperatures, Int J Hydrogen Energy, 45, 7036, 10.1016/j.ijhydene.2019.12.214

Yıldız, 2022, An islanded microgrid energy system with an innovative frequency controller integrating hydrogen-fuel cell, Fuel, 326, 10.1016/j.fuel.2022.125005

Renau, 2015, Use of fuel cell stacks to achieve high altitudes in light unmanned aerial vehicles, Int J Hydrogen Energy, 40, 14573, 10.1016/j.ijhydene.2015.02.071

Barbir, 2005, Efficiency and weight trade-off analysis of regenerative fuel cells as energy storage for aerospace applications, Int J Hydrogen Energy, 30, 351, 10.1016/j.ijhydene.2004.08.004

Zhao, 2022, Design and control of air supply system for PEMFC UAV based on dynamic decoupling strategy, Energy Convers Manag, 253, 10.1016/j.enconman.2021.115159

Renau, 2016, Design and manufacture of a high-temperature PEMFC and its cooling system to power a lightweight UAV for a high altitude mission, Int J Hydrogen Energy, 41, 19702, 10.1016/j.ijhydene.2015.12.209

Saleh, 2018, Environmental impact of high altitudes on the operation of PEM fuel cell based UAS, Energy Power Eng, 10, 87, 10.4236/epe.2018.103007

Bahari, 2022, Performance evaluation and multi-objective optimization of a novel UAV propulsion system based on PEM fuel cell, Fuel, 311, 10.1016/j.fuel.2021.122554

Lapena-Rey, 2017, A fuel cell powered unmanned aerial vehicle for low altitude surveillance missions, Int J Hydrogen Energy, 42, 6926, 10.1016/j.ijhydene.2017.01.137

Ozbek, 2020, Evaluation of design methodology, limitations, and iterations of a hydrogen fuelled hybrid fuel cell mini UAV, Energy, 213, 10.1016/j.energy.2020.118757

Depcik, 2020, Comparison of lithium ion Batteries, hydrogen fueled combustion Engines, and a hydrogen fuel cell in powering a small Unmanned Aerial Vehicle, Energy Convers Manag, 207, 10.1016/j.enconman.2020.112514

Zhang, 2018, Experimental investigation on the online fuzzy energy management of hybrid fuel cell/battery power system for UAVs, Int J Hydrogen Energy, 43, 10094, 10.1016/j.ijhydene.2018.04.075

Liu, 2022, A control architecture to coordinate energy management with trajectory tracking control for fuel cell/battery hybrid unmanned aerial vehicles, Int J Hydrogen Energy, 47, 15236, 10.1016/j.ijhydene.2022.03.036

Misra, 2018, Energy storage for electrified aircraft: the need for better batteries, fuel cells, and supercapacitors, IEEE Electrification Magazine, 6, 54, 10.1109/MELE.2018.2849922

Lieh J, Spahr E, Behbahani A, Hoying J. Design of hybrid propulsion systems for unmanned aerial vehicles. 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit 31 July - 03 August 2011. [San Diego, California], 1-13, https://doi.org/10.2514/6.2011-6146.

Gong, 2016, Performance of a hybrid, fuel-cell-based power system during simulated small unmanned aircraft missions, Int J Hydrogen Energy, 41, 11418, 10.1016/j.ijhydene.2016.04.044

Lei, 2019, State of art on energy management strategy for hybrid-powered unmanned aerial vehicle, Chin J Aeronaut, 32, 1488, 10.1016/j.cja.2019.03.013

Calısır, 2022, Benchmarking environmental impacts of power groups used in a designed UAV: hybrid hydrogen fuel cell system versus lithium-polymer battery drive system, Energy, 262

Veerendra, 2021, Hybrid power management for fuel cell/supercapacitor series hybrid electric vehicle, Int J Green Energy, 18, 128, 10.1080/15435075.2020.1831511

Bolam, 2018, Review of electrically powered propulsion for aircraft

Yigit, 2020, Speed controlling of the PEM fuel cell powered BLDC motor with FOPI optimized by MSA, Int J Hydrogen Energy, 45, 35097, 10.1016/j.ijhydene.2020.04.091

Chen, 2005, Speed control of switched reluctance motor drive powered by a fuel cell

Raminosoa, 2010, Design and optimization of a switched reluctance motor driving a compressor for a PEM fuel-cell system for automotive applications, IEEE Trans Ind Electron, 57, 2988, 10.1109/TIE.2010.2041133

Zhao, 2018, Design and initial testing of an integrated switched reluctance starter/generator system for unmanned aerial vehicle, CES Transactions on Electrical Machines and Systems, 2, 377, 10.30941/CESTEMS.2018.00048

Laudensack, 2014, Effective switched reluctance drive train in unmanned aerial vehicles: design investigations

Bongermino, 2017, Hybrid aeronautical propulsion: control and energy management, IFAC-PapersOnLine, 50, 169, 10.1016/j.ifacol.2017.12.031

Gang, 2018, Design of an energy management technique for high endurance unmanned aerial vehicles powered by fuel and solar cell systems, Int J Hydrogen Energy, 43, 9787, 10.1016/j.ijhydene.2018.04.049

Puranik, 2010, State-space modeling of proton exchange membrane fuel cell, IEEE Trans Energy Convers, 25, 804, 10.1109/TEC.2010.2047725

Ozdemir, 2021, Optimal parameter estimation of polymer electrolyte membrane fuel cells model with chaos embedded particle swarm optimization, Int J Hydrogen Energy, 46, 16465, 10.1016/j.ijhydene.2020.12.203

Kaya, 2017, Fuel cell/battery hybrid powered unmanned aerial vehicle with permanent magnet synchronous motor, Int J Sustainable Aviation, 3, 130, 10.1504/IJSA.2017.086216

Pukrushpan, 2002, Modeling and control for PEM fuel cell stack system

Uzunoglu, 2006, Dynamic modeling, design, and simulation of a combined PEM fuel cell and ultracapacitor system for stand-alone residential applications, IEEE Trans Energy Convers, 21, 767, 10.1109/TEC.2006.875468

Tanrioven, 2019, Demonstration and assessment of dynamic performance of a hybrid power system based electric passenger cart, Int J Hydrogen Energy, 44, 23348, 10.1016/j.ijhydene.2019.06.202

Sharifi Asl, 2010, Modelling and simulation of the steady-state and dynamic behaviour of a PEM fuel cell, Energy, 35, 1633, 10.1016/j.energy.2009.12.010

Gong, 2015, Development of a dynamic propulsion model for electric UAVs, 206

Yildirim, 2014, Designing in-wheel switched reluctance motor for electric vehicles

Omac, 2018, Design, analysis, and control of in-wheel switched reluctance motor for electric vehicles, Electr Eng, 100, 865, 10.1007/s00202-017-0541-3

Barrous, 2016, Approach for performance optimization of switched reluctance generator in variable-speed wind generation system, Renew Energy, 97, 114, 10.1016/j.renene.2016.05.064

Yildiz, 2016, Current ripple minimization of a PEM fuel cell via an interleaved converter to prolong the stack life, 1

Ozbek, 2021, Architecture design and performance analysis of a hybrid hydrogen fuel cell system for unmanned aerial vehicle, Int J Hydrogen Energy, 46, 16453, 10.1016/j.ijhydene.2020.12.216

Li, 2018, A novel equivalent consumption minimization strategy for hybrid electric vehicle powered by fuel cell, battery and supercapacitor, J Power Sources, 395, 262, 10.1016/j.jpowsour.2018.05.078

Thounthong, 2010, Modeling and control of fuel cell/supercapacitor hybrid source based on differential flatness control, IEEE Trans Veh Technol, 59, 2700, 10.1109/TVT.2010.2046759

Li, 2017, Equivalent consumption minimization strategy for fuel cell hybrid electric vehicle considering fuel cell degradation

Oldham, 2008, Gouy–Chapman–Stern model of the double layer at a (metal)/(ionic liquid) interface, J Electroanal Chem, 613, 131, 10.1016/j.jelechem.2007.10.017