Effect of Structural Build-Up on Interlayer Bond Strength of 3D Printed Cement Mortars

Materials - Tập 14 Số 2 - Trang 236
Tinghong Pan1, Yi-Rong Jiang1, Hui He1, Yu Wang1, Kangting Yin1
1College of Mechanics and Materials, Hohai University, Nanjing 211100, China

Tóm tắt

Understanding the relationship between the intrinsic characteristics of materials (such as rheological properties and structural build-up) and printability and controlling intrinsic characteristics of materials through additives to achieve excellent printability is vital in digital concrete additive manufacturing. This paper aims at studying the effects of material’s structural build-up on the interlayer bond strength of 3DPC with different time gaps. Structural build-up can indirectly affect the interlayer bond strength by affecting the surface moisture of concrete. Based on the structural build-up of 3DPC, a new parameter, maximum operational time (MOT), is proposed, which can be considered as the limit of time gap to ensure high interlayer bond strength. Slump-retaining polycarboxylate superplasticizer (TS) slightly slows down the physical flocculation rate, but increases the maximum operational time of the cement paste. Nano clay significantly increases the sort-term structural build-up rate and has the function of internal curing and water retaining. Composite with nano-clay and TS can reduce the loss of surface moisture of 3D printed layers, prevent the formation of interface weak layer, and increase the interlayer bond strength between printed layers. This contribution can provide new insight into the design of 3D-printed ink with good extrudability, outstanding buildability, and excellent interlayer bond strength.

Từ khóa


Tài liệu tham khảo

Buswel, 2018, 3D printing using concrete extrusion: A roadmap for research, Cem. Concr. Res., 112, 37, 10.1016/j.cemconres.2018.05.006

Lesage, 2018, Vision of 3D printing with concrete—Technical, economic and environmental potentials, Cem. Concr. Res., 112, 25, 10.1016/j.cemconres.2018.06.001

Paul, 2018, Fresh and hardened properties of 3D printable cementitious materials for building and construction, Arch. Civ. Mech. Eng., 18, 311, 10.1016/j.acme.2017.02.008

Wolfs, 2019, Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion, Cem. Concr. Res., 119, 132, 10.1016/j.cemconres.2019.02.017

Tay, 2019, Time gap effect on bond strength of 3D-printed concrete, Virtual Phys. Prototyp., 14, 104, 10.1080/17452759.2018.1500420

Mechtcherine, 2020, Extrusion-based additive manufacturing with cement-based materials—Production steps, processes, and their underlying physics: A review, Cem. Concr. Res., 132, 106037, 10.1016/j.cemconres.2020.106037

Reiter, 2018, The role of early age structural build-up in digital fabrication with concrete, Cem. Concr. Res., 112, 86, 10.1016/j.cemconres.2018.05.011

Panda, B., Noor, M.N., and Paul, S.C. (2019). The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete. Materials, 12.

Yuan, 2020, Structural build-up, hydration and strength development of cement-based materials with accelerators, Constr. Build. Mater., 259, 119775, 10.1016/j.conbuildmat.2020.119775

Wallevik, 2009, Rheological properties of cement paste: Thixotropic behavior and structural breakdown, Cem. Concr. Res., 39, 14, 10.1016/j.cemconres.2008.10.001

Roussel, 2008, Distinct-layer casting of SCC: The mechanical consequences of thixotropy, Cem. Concr. Res., 38, 624, 10.1016/j.cemconres.2007.09.023

Assaad, 2016, Preliminary study on interfacial bond strength due to successive casting lifts of self-consolidating concret—Effect of thixotropy, Constr. Build. Mater., 126, 351, 10.1016/j.conbuildmat.2016.09.049

Wangler, 2016, Digital Concrete: Opportunities and Challenges, RILEM Tech. Lett., 1, 67, 10.21809/rilemtechlett.2016.16

Roussel, 2018, Rheological requirements for printable concretes, Cem. Concr. Res., 112, 76, 10.1016/j.cemconres.2018.04.005

Perrot, 2016, Structural built-up of cement-based materials used for 3D-printing extrusion techniques, Mater. Struct., 49, 1213, 10.1617/s11527-015-0571-0

Dressler, I., Freund, N., and Lowke, D. (2020). The Effect of Accelerator Dosage on Fresh Concrete Properties and on Interlayer Strength in Shotcrete 3D Printing. Materials, 13.

Chen, 2020, Effect of printing parameters on interlayer bond strength of 3D printed limestone-calcined clay-based cementitious materials: An experimental and numerical study, Constr. Build. Mater., 262, 120094, 10.1016/j.conbuildmat.2020.120094

Kloft, 2020, Influence of process parameters on the interlayer bond strength of concrete elements additive manufactured by Shotcrete 3D Printing (SC3DP), Cem. Concr. Res., 134, 106078, 10.1016/j.cemconres.2020.106078

Sanjayan, 2018, Effect of surface moisture on inter-layer strength of 3D printed concrete, Constr. Build. Mater., 172, 468, 10.1016/j.conbuildmat.2018.03.232

Keita, 2019, Weak bond strength between successive layers in extrusion-based additive manufacturing: Measurement and physical origin, Cem. Concr. Res., 123, 105787, 10.1016/j.cemconres.2019.105787

Ma, 2020, A novel additive mortar leveraging internal curing for enhancing interlayer bonding of cementitious composite for 3D printing, Constr. Build. Mater., 244, 118305, 10.1016/j.conbuildmat.2020.118305

Marchment, 2019, Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification, Mater. Des., 169, 107684, 10.1016/j.matdes.2019.107684

Zareiyan, 2017, Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete, Automat. Constr., 83, 212, 10.1016/j.autcon.2017.08.019

Qian, 2018, Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE), Cem. Concr. Res., 111, 15, 10.1016/j.cemconres.2018.06.013

Kawashima, 2013, Rate of thixotropic rebuilding of cement pastes modified with highly purified attapulgite clays, Cem. Concr. Res., 53, 112, 10.1016/j.cemconres.2013.05.019

Chen, 2020, Yield stress and thixotropy control of 3D-printed calcium sulfoaluminate cement composites with metakaolin related to structural build-up, Constr. Build. Mater., 252, 119090, 10.1016/j.conbuildmat.2020.119090

Dai, 2019, Mechanical Properties of Paste Slurry under Constant Shear Rate in Initial Structure Failure Process, Adv. Mater. Sci. Eng., 2019, 2971563, 10.1155/2019/2971563

Ivanova, I., and Mechtcherine, V. (2020). Effects of Volume Fraction and Surface Area of Aggregates on the Static Yield Stress and Structural Build-Up of Fresh Concrete. Materials, 13.

Yuan, 2017, On the measurement of evolution of structural build-up of cement paste with time by static yield stress test vs. small amplitude oscillatory shear test, Cem. Concr. Res., 99, 183, 10.1016/j.cemconres.2017.05.014

Panda, 2019, Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application, Mater. Lett., 237, 348, 10.1016/j.matlet.2018.11.131

Kawashima, 2012, Study of the mechanisms underlying the fresh-state response of cementitious materials modified with nanoclays, Constr. Build. Mater., 36, 749, 10.1016/j.conbuildmat.2012.06.057

Roussel, 2006, A thixotropy model for fresh fluid concretes: Theory, validation and applications, Cem. Concr. Res., 36, 1797, 10.1016/j.cemconres.2006.05.025

Omran, 2014, Choice of thixotropic index to evaluate formwork pressure characteristics of self-consolidating concrete, Cem. Concr. Res., 63, 89, 10.1016/j.cemconres.2014.05.005

Martys, 2009, Contact and stress anisotropies in start-up flow of colloidal suspensions, Phys. Rev. E, 80, 31401, 10.1103/PhysRevE.80.031401

Lootens, 2009, Yield stress during setting of cement pastes from penetration tests, Cem. Concr. Res., 39, 401, 10.1016/j.cemconres.2009.01.012

Mostafa, 2017, Physico-chemical kinetics of structural build-up of neat cement-based suspensions, Cem. Concr. Res., 97, 11, 10.1016/j.cemconres.2017.03.003

Haruna, 2020, Time- and temperature-dependent rheological properties of cemented paste backfill that contains superplasticizer, Powder Technol., 360, 731, 10.1016/j.powtec.2019.09.025

Tregger, 2010, Influence of clays on the rheology of cement pastes, Cem. Concr. Res., 40, 384, 10.1016/j.cemconres.2009.11.001

Le, 2012, Mix design and fresh properties for high-performance printing concrete, Mater. Struct., 45, 1221, 10.1617/s11527-012-9828-z

Kim, 2017, Rheology of cement paste under high pressure, Cem. Concr. Compos., 77, 60, 10.1016/j.cemconcomp.2016.11.007

Choi, 2013, Prediction on pipe flow of pumped concrete based on shear-induced particle migration, Cem. Concr. Res., 52, 216, 10.1016/j.cemconres.2013.07.004

von Bronk, T., Haist, M., and Lohaus, L. (2020). The Influence of Bleeding of Cement Suspensions on Their Rheological Properties. Materials, 13.

Thông tin
Thông tin xuất bản

Materials

Tập 14 Số 2

236

Thông tin tác giả