Effect of Material and Process Specific Factors on the Strength of Printed Parts in Fused Filament Fabrication: A Review of Recent Developments

Carneiro, 2015, Fused deposition modeling with polypropylene, Mater. Des., 83, 768, 10.1016/j.matdes.2015.06.053

Wang, 2016, A novel approach to improve mechanical properties of parts fabricated by fused deposition modeling, Mater. Des., 105, 152, 10.1016/j.matdes.2016.05.078

Thomas, 2016, 3D scanning and printing skeletal tissues for anatomy education, J. Anat., 229, 473, 10.1111/joa.12484

Wu, 2017, Characterisation, biodegradability and application of palm fibre-reinforced polyhydroxyalkanoate composites, Polym. Degrad. Stab., 140, 55, 10.1016/j.polymdegradstab.2017.04.016

Gardner, 2019, Machines as Craftsmen: Localized Parameter Setting Optimization for Fused Filament Fabrication 3D Printing, Adv. Mater. Technol., 4, 1800653, 10.1002/admt.201800653

Hsiao, W.-K., Lorber, B., Reitsamer, H., and Khinast, J. (2018). 3D printing of oral drugs: A new reality or hype?. J. Expert Opin. Drug Deliv., 15.

Siqueiros, 2016, ABS-maleated SEBS blend as a 3D printable material, Virtual Phys. Prototyp., 11, 123, 10.1080/17452759.2016.1175045

Lipson, H., and Kurman, M. (2013). Fabricated: The New World of 3D Printing, John Wiley & Sons.

Hudson, S.E. (May, January 26). Printing teddy bears: A technique for 3D printing of soft interactive objects. Proceedings of the SIGCHI Conference on Human Factors in Computing Systems, Toronto, ON, Canada.

Ready, S., Endicott, F., Whiting, G.L., Ng, T.A., Chow, E.M., and Lu, J. (October, January 29). 3D printed electronics. Proceedings of the International Conference on Digital Printing Technologies, Seattle, WA, USA.

Zhang, 2013, The roles of traditional Chinese medicine: Shen-fu injection on the postresuscitation care bundle, Evid.-Based Complement. Altern. Med., 2013, 319092

Garcia, 2013, Effects of extreme surface roughness on 3D printed horn antenna, Electron. Lett., 49, 734, 10.1049/el.2013.1528

Berman, 2012, 3-D printing: The new industrial revolution, Bus. Horiz., 55, 155, 10.1016/j.bushor.2011.11.003

Ahn, 2012, Smart soft composite: An integrated 3D soft morphing structure using bend-twist coupling of anisotropic materials, Int. J. Precis. Eng. Manuf., 13, 631, 10.1007/s12541-012-0081-8

Ahmed, 2013, Manufacture of an unmanned aerial vehicle (UAV) for advanced project design using 3D printing technology, Appl. Mech. Mater., 397, 970, 10.4028/www.scientific.net/AMM.397-400.970

Richardson, 2012, Designer/maker: The rise of additive manufacturing, domestic-scale production and the possible implications for the automotive industry, Comput.-Aided Des. Appl. PACE, 2, 33, 10.3722/cadaps.2012.PACE.33-48

Hajializadeh, 2019, Finite element–based numerical modeling framework for additive manufacturing process, Mater. Des. Process. Commun., 1, e28, 10.1002/mdp2.28

Murphy, 2014, 3D bioprinting of tissues and organs, Nat. Biotechnol., 32, 773, 10.1038/nbt.2958

Seliktar, 2013, Bioprinting and tissue engineering: Recent advances and future perspectives, Isr. J. Chem., 53, 795, 10.1002/ijch.201300084

Xu, 2013, Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology, Biomaterials, 34, 130, 10.1016/j.biomaterials.2012.09.035

Paulsen, 2015, Tissue vascularization through 3D printing: Will technology bring us flow?, Dev. Dyn., 244, 629, 10.1002/dvdy.24254

Stansbury, 2016, 3D printing with polymers: Challenges among expanding options and opportunities, Dent. Mater., 32, 54, 10.1016/j.dental.2015.09.018

Schmelzeisen, D., Koch, H., Pastore, C., and Gries, T. (2018). 4D Textiles: Hybrid Textile Structures that Can Change Structural Form with Time by 3D Printing. Narrow and Smart Textiles, Springer.

Melnikova, 2014, 3D printing of textile-based structures by Fused Deposition Modelling (FDM) with different polymer materials, IOP Conference Series: Materials Science and Engineering, Volume 62, 012018, 10.1088/1757-899X/62/1/012018

Grimmelsmann, 2018, Adhesion of 3D printed material on textile substrates, Rapid Prototyp. J., 24, 166, 10.1108/RPJ-05-2016-0086

Bos, 2016, Additive manufacturing of concrete in construction: Potentials and challenges of 3D concrete printing, Virtual Phys. Prototyp., 11, 209, 10.1080/17452759.2016.1209867

Wu, 2016, A critical review of the use of 3-D printing in the construction industry, Autom. Constr., 68, 21, 10.1016/j.autcon.2016.04.005

Hager, 2016, 3D printing of buildings and building components as the future of sustainable construction?, Procedia Eng., 151, 292, 10.1016/j.proeng.2016.07.357

Perkins, 2015, Three-dimensional printing in the construction industry: A review, Int. J. Constr. Manag., 15, 1

Diegel, 2006, A case study of rapid prototype as design in educational engineering projects, Int. J. Eng. Educ., 22, 350

Wong, 2012, A review of additive manufacturing, ISRN Mech. Eng., 2012, 208760, 10.5402/2012/208760

Campbell, 2013, 3D printing of multifunctional nanocomposites, Nano Today, 8, 119, 10.1016/j.nantod.2012.12.002

Olakanmi, 2013, Selective laser sintering/melting (SLS/SLM) of pure Al, Al-Mg, and Al-Si powders: Effect of processing conditions and powder properties, J. Mater. Process. Technol., 213, 1387, 10.1016/j.jmatprotec.2013.03.009

Bose, 2013, Bone tissue engineering using 3D printing, Mater. Today, 16, 496, 10.1016/j.mattod.2013.11.017

Utela, 2008, A review of process development steps for new material systems in three dimensional printing (3DP), J. Manuf. Process., 10, 96, 10.1016/j.jmapro.2009.03.002

McCullough, 2013, Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices, J. Mater. Process. Technol., 213, 947, 10.1016/j.jmatprotec.2012.12.015

Diegel, 2012, Low-Cost 3D Printing of Controlled Porosity Ceramic Parts, IJAT, 6, 618, 10.20965/ijat.2012.p0618

Pereira, T.M., Potgieter, J., and Kennedy, J. (2017, January 11–13). Development of Quality Management Strategies for 3D Printing Testing Methods—A Review. Proceedings of the 2017 4th Asia-Pacific World Congress on Computer Science and Engineering (APWC on CSE), Nadi, Fiji.

Pereira, T., Potgieter, J., and Kennedy, J.V. (2017, January 21–23). A fundamental study of 3D printing testing methods for the development of new quality management strategies. Proceedings of the 2017 24th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), Auckland, New Zealand.

Potgieter, 2012, Additive Manufacturing in the Context of Hybrid Flexible Manufacturing Systems, IJAT, 6, 627, 10.20965/ijat.2012.p0627

Whyman, 2018, Design and development of an extrusion system for 3D printing biopolymer pellets, Int. J. Adv. Manuf. Technol., 96, 3417, 10.1007/s00170-018-1843-y

Ferreira, 2017, Retrofitment, open-sourcing, and characterisation of a legacy fused deposition modelling system, Int. J. Adv. Manuf. Technol., 90, 3357, 10.1007/s00170-016-9665-2

Mearns, C., Potgieter, J., Dirven, S., and Le Guen, M.J. (2017, January 21–23). Experimental analysis of the effectiveness of current modelling methods for SLS parameter determination. Proceedings of the 2017 24th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), Auckland, New Zealand.

Wjesundera, P., Schutte, J., and Potgieter, J. (2017, January 21–23). The effects of acetone vapour inter-layer processing on fused deposition modelling 3D printed acrylonitrile butadiene styrene. Proceedings of the 2017 24th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), Auckland, New Zealand.

Khoo, 2015, 3D printing of smart materials: A review on recent progresses in 4D printing, Virtual Phys. Prototyp., 10, 103, 10.1080/17452759.2015.1097054

Campbell, 2012, Additive manufacturing: Rapid prototyping comes of age, Rapid Prototyp. J., 18, 255, 10.1108/13552541211231563

Umaras, 2017, Additive Manufacturing—Considerations on Geometric Accuracy and Factors of Influence, IFAC-PapersOnLine, 50, 14940, 10.1016/j.ifacol.2017.08.2545

Loh, 2018, An overview of functionally graded additive manufacturing, Addit. Manuf., 23, 34

Harris, M., Potgieter, J., Arif, K., and Archer, R. (2017, January 21–23). Large scale 3D printing: Feasibility of novel extrusion based process and requisite materials. Proceedings of the 2017 24th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), Auckland, New Zealand.

Brenken, 2018, Fused filament fabrication of fiber-reinforced polymers: A review, Addit. Manuf., 21, 1

Wang, 2017, Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM), Polymer, 114, 242, 10.1016/j.polymer.2017.03.011

Arif, 2018, Performance of biocompatible PEEK processed by fused deposition additive manufacturing, Mater. Des., 146, 249, 10.1016/j.matdes.2018.03.015

Liao, 2018, Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling, Mater. Des., 139, 283, 10.1016/j.matdes.2017.11.027

Stoof, 2018, Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene, Compos. Part B Eng., 135, 110, 10.1016/j.compositesb.2017.10.005

Zhang, 2018, Interfacial bonding strength of short carbon fiber/acrylonitrile-butadiene-styrene composites fabricated by fused deposition modeling, Compos. Part B Eng., 137, 51, 10.1016/j.compositesb.2017.11.018

Geng, 2019, Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament, J. Manuf. Process., 37, 266, 10.1016/j.jmapro.2018.11.023

Decuir, F., Phelan, K., and Hollins, B.C. (2016, January 11–13). Mechanical Strength of 3-D Printed Filaments. Proceedings of the 32nd Southern Biomedical Engineering Conference (SBEC), Shreveport, LA, USA.

Cuan-Urquizo, E., Barocio, E., Tejada-Ortigoza, V., Pipes, R.B., Rodriguez, C.A., and Roman-Flores, A. (2019). Characterization of the Mechanical Properties of FFF Structures and Materials: A Review on the Experimental, Computational and Theoretical Approaches. Materials, 12.

Koga, 2015, 3D printing of continuous carbon fibre reinforced thermo-plastic (CFRTP) tensile test specimens, Open J. Compos. Mater., 6, 18

Rankouhi, 2016, Failure Analysis and Mechanical Characterization of 3D Printed ABS With Respect to Layer Thickness and Orientation, J. Fail. Anal. Prev., 16, 467, 10.1007/s11668-016-0113-2

Tian, 2016, Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites, Compos. Part A Appl. Sci. Manuf., 88, 198, 10.1016/j.compositesa.2016.05.032

Caminero, 2017, Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection, Mater. Des., 124, 143, 10.1016/j.matdes.2017.03.065

Lluma, 2015, Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts, Mater. Des., 83, 670, 10.1016/j.matdes.2015.06.074

Sood, 2010, Parametric appraisal of mechanical property of fused deposition modelling processed parts, Mater. Des., 31, 287, 10.1016/j.matdes.2009.06.016

Tymrak, 2014, Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions, Mater. Des., 58, 242, 10.1016/j.matdes.2014.02.038

Casavola, 2016, Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory, Mater. Des., 90, 453, 10.1016/j.matdes.2015.11.009

Anitha, 2001, Critical parameters influencing the quality of prototypes in fused deposition modelling, J. Mater. Process. Technol., 118, 385, 10.1016/S0924-0136(01)00980-3

Knoop, F., and Schoeppner, V. (2015, January 10–12). Mechanical and thermal properties of FDM parts manufactured with polyamide 12. Proceedings of the 26th Annual International Solid Freeform Fabrication Symposium—An Additive Manufacturing Conference, Austin, TX, USA.

Dul, 2016, Fused deposition modelling with ABS–graphene nanocomposites, Compos. Part A Appl. Sci. Manuf., 85, 181, 10.1016/j.compositesa.2016.03.013

Shaffer, 2014, On reducing anisotropy in 3D printed polymers via ionizing radiation, Polymer, 55, 5969, 10.1016/j.polymer.2014.07.054

Christiyan, 2016, A study on the influence of process parameters on the Mechanical Properties of 3D printed ABS composite, IOP Conference Series: Materials Science and Engineering, Volume 114, 012109, 10.1088/1757-899X/114/1/012109

Ning, 2017, Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties, J. Compos. Mater., 51, 451, 10.1177/0021998316646169

Ayrilmis, N., Kariz, M., Kwon, J.H., and Kitek Kuzman, M. (2019). Effect of printing layer thickness on water absorption and mechanical properties of 3D-printed wood/PLA composite materials. Int. J. Adv. Manuf. Technol.

Valerga, A.P., Batista, M., Salguero, J., and Girot, F. (2018). Influence of PLA Filament Conditions on Characteristics of FDM Parts. Materials, 11.

Johnson, 2018, Exposures during industrial 3-D printing and post-processing tasks, Rapid Prototyp. J., 24, 865, 10.1108/RPJ-03-2017-0050

Chohan, 2017, Pre and post processing techniques to improve surface characteristics of FDM parts: A state of art review and future applications, Rapid Prototyp. J., 23, 495, 10.1108/RPJ-05-2015-0059

Lalehpour, 2018, Surface roughness of FDM parts after post-processing with acetone vapor bath smoothing process, Int. J. Adv. Manuf. Technol., 95, 1505, 10.1007/s00170-017-1165-5

Valerga, A.P., Batista, M., Fernandez-Vidal, S.R., and Gamez, A.J. (2019). Impact of Chemical Post-Processing in Fused Deposition Modelling (FDM) on Polylactic Acid (PLA) Surface Quality and Structure. Polymers, 11.

Zaldivar, 2017, Strengthening of plasma treated 3D printed ABS through epoxy infiltration, Prog. Addit. Manuf., 2, 193, 10.1007/s40964-017-0032-0

Equbal, 2014, Metallization on FDM Parts Using the Chemical Deposition Technique, Coatings, 4, 574, 10.3390/coatings4030574

Martin, 2017, Thin-walled high temperature alloy structures fabricated from additively manufactured polymer templates, Mater. Des., 120, 291, 10.1016/j.matdes.2017.02.023

Lavecchia, 2018, Computer Numerical Controlled Grinding and Physical Vapor Deposition for Fused Deposition Modelled Workpieces, Adv. Mater. Sci. Eng., 2018, 9037490, 10.1155/2018/9037490

Harris, 2019, In-process thermal treatment of polylactic acid in fused deposition modelling, Mater. Manuf. Process., 34, 701, 10.1080/10426914.2019.1566611

Yang, 2017, Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material, J. Mater. Process. Technol., 248, 1, 10.1016/j.jmatprotec.2017.04.027

Singh, 2017, Material issues in additive manufacturing: A review, J. Manuf. Process., 25, 185, 10.1016/j.jmapro.2016.11.006

Woodfield, 2004, Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique, Biomaterials, 25, 4149, 10.1016/j.biomaterials.2003.10.056

Zeng, 2008, Fused deposition modelling of an auricle framework for microtia reconstruction based on CT images, Rapid Prototyp. J., 14, 280, 10.1108/13552540810907947

Zeltinger, 2001, Effect of pore size and void fraction on cellular adhesion, proliferation, and matrix deposition, Tissue Eng., 7, 557, 10.1089/107632701753213183

Lam, 2002, Scaffold development using 3D printing with a starch-based polymer, Mater. Sci. Eng. C, 20, 49, 10.1016/S0928-4931(02)00012-7

Ang, 2002, Fabrication of 3D chitosan–hydroxyapatite scaffolds using a robotic dispensing system, Mater. Sci. Eng. C, 20, 35, 10.1016/S0928-4931(02)00010-3

Tanase, 2014, PLA/chitosan/keratin composites for biomedical applications, Mater. Sci. Eng. C, 40, 242, 10.1016/j.msec.2014.03.054

Przybytek, 2018, Polyurethanes as a Potential Medical-Grade Filament for Use in Fused Deposition Modeling 3D Printers—A Brief Review, Fibres Text. Eastern Eur., 6, 120, 10.5604/01.3001.0012.5168

Tsai, 2017, Biomimetic heterogenous elastic tissue development, NPJ Regen. Med., 2, 16, 10.1038/s41536-017-0021-4

Grida, 2003, Extrusion freeforming of ceramics through fine nozzles, J. Eur. Ceram. Soc., 23, 629, 10.1016/S0955-2219(02)00163-2

Zocca, 2015, Additive manufacturing of ceramics: Issues, potentialities, and opportunities, J. Am. Ceram. Soc., 98, 1983, 10.1111/jace.13700

Singh, 2016, Experimental investigations for development of Nylon6-Al-Al2O3 alternative FDM filament, Rapid Prototyp. J., 22, 217, 10.1108/RPJ-04-2014-0052

Singh, 2016, Development of in-house composite wire based feed stock filaments of fused deposition modelling for wear-resistant materials and structures, Compos. Part B Eng., 98, 244, 10.1016/j.compositesb.2016.05.038

Khatri, B., Lappe, K., Noetzel, D., Pursche, K., and Hanemann, T. (2018). A 3D-printable polymer-metal soft-magnetic functional composite—Development and characterization. Materials, 11.

Hohimer, 2018, Electrical conductivity and piezoresistive response of 3D printed thermoplastic polyurethane/multiwalled carbon nanotube composites, Behavior and Mechanics of Multifunctional Materials and Composites XII, Volume 10596, 105960J

Klippstein, 2018, Fused deposition modeling for unmanned aerial vehicles (uavs): A review, Adv. Eng. Mater., 20, 1700552, 10.1002/adem.201700552

RUMLEY-OUELLETTE, B.J., WAHRY, J.H., BAKER, A.M., BERNARDIN, J.D., MARCHI, A.N., and TODD, M.D. (2017). In situ printing of conductive poly lactic acid strain sensors embedded into additively manufactured parts. Struct. Health Monit.

Pranzo, D., Larizza, P., Filippini, D., and Percoco, G. (2018). Extrusion-based 3D printing of microfluidic devices for chemical and biomedical applications: A topical review. Micromachines, 9.

Lu, Z., Cao, J., Song, Z., Li, D., and Lu, B. (2019). Research progress of ceramic matrix composite parts based on additive manufacturing technology. Virtual Phys. Prototyp.

Tanikella, 2017, Tensile strength of commercial polymer materials for fused filament fabrication 3D printing, Addit. Manuf., 15, 40

Kumar, 2018, The effect of process parameters on tensile behavior of 3D printed flexible parts of ethylene vinyl acetate (EVA), J. Manuf. Process., 35, 317, 10.1016/j.jmapro.2018.08.013

Kempin, 2017, Assessment of different polymers and drug loads for fused deposition modeling of drug loaded implants, Eur. J. Pharm. Biopharm., 115, 84, 10.1016/j.ejpb.2017.02.014

Goyanes, 2016, Fused-filament 3D printing of drug products: Microstructure analysis and drug release characteristics of PVA-based caplets, Int. J. Pharm., 514, 290, 10.1016/j.ijpharm.2016.06.021

Wu, 2015, Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS, Materials, 8, 5834, 10.3390/ma8095271

Kotlinski, 2014, Mechanical properties of commercial rapid prototyping materials, Rapid Prototyp. J., 20, 499, 10.1108/RPJ-06-2012-0052

Yang, 2017, 3D printing for continuous fiber reinforced thermoplastic composites: Mechanism and performance, Rapid Prototyp. J., 23, 209, 10.1108/RPJ-08-2015-0098

Lanzotti, 2015, The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer, Rapid Prototyp. J., 21, 604, 10.1108/RPJ-09-2014-0135

Vaezi, 2011, Effects of layer thickness and binder saturation level parameters on 3D printing process, Int. J. Adv. Manuf. Technol., 53, 275, 10.1007/s00170-010-2821-1

Song, 2017, Measurements of the mechanical response of unidirectional 3D-printed PLA, Mater. Des., 123, 154, 10.1016/j.matdes.2017.03.051

Wach, 2018, Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing, Macromol. Mater. Eng., 303, 1800169, 10.1002/mame.201800169

Rezayat, 2015, Structure–mechanical property relationship in fused deposition modelling, Mater. Sci. Technol., 31, 895, 10.1179/1743284715Y.0000000010

Torrado, 2015, Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printing, Addit. Manuf., 6, 16

Rinaldi, 2018, Additive layer manufacturing of poly (ether ether ketone) via FDM, Compos. Part B Eng., 145, 162, 10.1016/j.compositesb.2018.03.029

Huang, 2019, Study of processing parameters in fused deposition modeling based on mechanical properties of acrylonitrile-butadiene-styrene filament, Polym. Eng. Sci., 59, 120, 10.1002/pen.24875

Conway, 2019, Crazing in additively manufactured acrylonitrile butadiene styrene, Eng. Fract. Mech., 211, 114, 10.1016/j.engfracmech.2019.02.020

Kucewicz, 2018, Modelling, and characterization of 3D printed cellular structures, Mater. Des., 142, 177, 10.1016/j.matdes.2018.01.028

Vaezi, 2015, Extrusion-based additive manufacturing of PEEK for biomedical applications, Virtual Phys. Prototyp., 10, 123, 10.1080/17452759.2015.1097053

Deng, X., Zeng, Z., Peng, B., Yan, S., and Ke, W. (2018). Mechanical properties optimization of poly-ether-ether-ketone via fused deposition modeling. Materials, 11.

TERMOPLASTI, 2013, Processing poly (ether etherketone) on a 3D printer for thermoplastic modelling, Mater. Tehnol., 47, 715

Tseng, 2018, Screw extrusion-based additive manufacturing of PEEK, Mater. Des., 140, 209, 10.1016/j.matdes.2017.11.032

Zhao, F., Li, D., and Jin, Z. (2018). Preliminary Investigation of Poly-Ether-Ether-Ketone Based on Fused Deposition Modeling for Medical Applications. Materials, 11.

Barber, 1974, The use of tensile tests to determine the optimum conditions for butt fusion welding certain grades of polyethylene, polybutene-1 and polypropylene pipes, J. Mater. Sci., 9, 1456, 10.1007/BF00552931

Wang, 2018, Cellulose nanofibril-reinforced polypropylene composites for material extrusion: Rheological properties, Polym. Eng. Sci., 58, 793, 10.1002/pen.24615

Wang, 2017, Effect of fused layer modeling (FLM) processing parameters on impact strength of cellular polypropylene, Polymer, 113, 74, 10.1016/j.polymer.2017.02.055

Sodeifian, 2019, Preparation of Polypropylene/Short Glass Fiber Composite as Fused Deposition Modeling (FDM) Filament, Results Phys., 12, 205, 10.1016/j.rinp.2018.11.065

Slota, 2016, Structure and tensile properties evaluation of samples produced by Fused Deposition Modeling, Open Eng., 6, 86

Alsina, 2018, Flexural Fatigue Properties of Polycarbonate Fused-deposition Modelling Specimens, Mater. Des., 155, 414, 10.1016/j.matdes.2018.06.018

Perez, 2018, A study of creep in polycarbonate fused deposition modelling parts, Mater. Des., 141, 414, 10.1016/j.matdes.2018.01.008

Boschetto, 2013, 3D roughness profile model in fused deposition modelling, Rapid Prototyp. J., 19, 240, 10.1108/13552541311323254

Smith, 2013, Structural characteristics of fused deposition modeling polycarbonate material, Polym. Test., 32, 1306, 10.1016/j.polymertesting.2013.07.014

Hill, 2014, Deposition direction-dependent failure criteria for fused deposition modeling polycarbonate, Rapid Prototyp. J., 20, 221, 10.1108/RPJ-04-2013-0039

Aslanzadeh, 2018, Investigation on electrical and mechanical properties of 3D printed nylon 6 for RF/microwave electronics applications, Addit. Manuf., 21, 69

SAYILAN, 2017, Kompozitler için 3D Yazıcı İle Yüksek Performanslı Tekstil Yapılarının Tasarlanması ve Geliştirilmesi, Tekstil ve Mühendis, 24, 13, 10.7216/1300759920172410502

Geng, Y., He, H., Jia, Y., Peng, X., and Li, Y. (2019). Enhanced through-plane thermal conductivity of polyamide 6 composites with vertical alignment of boron nitride achieved by fused deposition modeling. Polym. Compos.

Karsli, 2013, Tensile and thermomechanical properties of short carbon fiber reinforced polyamide 6 composites, Compos. Part B Eng., 51, 270, 10.1016/j.compositesb.2013.03.023

Botelho, 2003, Mechanical behavior of carbon fiber reinforced polyamide composites, Compos. Sci. Technol., 63, 1843, 10.1016/S0266-3538(03)00119-2

Tezcan, 2008, Measurement and analytical validation of interfacial bond strength of PAN-fiber-reinforced carbon matrix composites, J. Mater. Sci., 43, 1612, 10.1007/s10853-007-2333-z

Vautard, 2013, Influence of thermal history on the mechanical properties of carbon fiber–acrylate composites cured by electron beam and thermal processes, Compos. Part A Appl. Sci. Manuf., 45, 162, 10.1016/j.compositesa.2012.08.025

Bettini, 2017, Fused deposition technique for continuous fiber reinforced thermoplastic, J. Mater. Eng. Perform., 26, 843, 10.1007/s11665-016-2459-8

Kvalsvig, A., Yuan, X., Potgieter, J., and Cao, P. (2017, January 21–23). Analysing the tensile properties of 3D printed fibre reinforced thermoplastic composite specimens. Proceedings of the 2017 24th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), Auckland, New Zealand.

Li, 2011, The carbon fiber surface treatment and addition of PA6 on tensile properties of ABS composites, Curr. Appl. Phys., 11, 50, 10.1016/j.cap.2010.06.017

Rezaei, 2009, Effect of fiber length on thermomechanical properties of short carbon fiber reinforced polypropylene composites, Mater. Des., 30, 260, 10.1016/j.matdes.2008.05.005

Li, 2008, Interfacial studies on the O3 modified carbon fiber-reinforced polyamide 6 composites, Appl. Surf. Sci., 255, 2822, 10.1016/j.apsusc.2008.08.013

Hao, 2018, Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites, Polym. Test., 65, 29, 10.1016/j.polymertesting.2017.11.004

Akhoundi, B., Behravesh, A.H., and Bagheri Saed, A. (2018). Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer. J. Reinf. Plast. Compos.

Agarwal, K., Kuchipudi, S.K., Girard, B., and Houser, M. (2018). Mechanical properties of fiber reinforced polymer composites: A comparative study of conventional and additive manufacturing methods. J. Compos. Mater.

Dong, 2018, Mechanical Properties of Continuous Kevlar Fiber Reinforced Composites Fabricated by Fused Deposition Modeling Process, Procedia Manuf., 26, 774, 10.1016/j.promfg.2018.07.090

Caminero, 2018, Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling, Polym. Test., 68, 415, 10.1016/j.polymertesting.2018.04.038

Li, 2016, Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing, J. Mater. Process. Technol., 238, 218, 10.1016/j.jmatprotec.2016.07.025

Matsuzaki, 2016, Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation, Sci. Rep., 6, 23058, 10.1038/srep23058

Love, 2014, The importance of carbon fiber to polymer additive manufacturing, J. Mater. Res., 29, 1893, 10.1557/jmr.2014.212

Oztan, C., Karkkainen, R., Fittipaldi, M., Nygren, G., Roberson, L., Lane, M., and Celik, E. (2018). Microstructure and mechanical properties of three dimensional-printed continuous fiber composites. J. Compos. Mater.

Drummer, 2012, Suitability of PLA/TCP for fused deposition modeling, Rapid Prototyp. J., 18, 500, 10.1108/13552541211272045

DeNardo, N.M. (2016). Additive Manufacturing of Carbon Fiber-Reinforced Thermoplastic Composites. [Master’s Thesis, Purdue University].

Weng, 2016, Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing, Mater. Des., 102, 276, 10.1016/j.matdes.2016.04.045

Espinach, 2018, Bio-polyethylene reinforced with thermomechanical pulp fibers: Mechanical and micromechanical characterization and its application in 3D-printing by fused deposition modelling, Compos. Part B Eng., 153, 70, 10.1016/j.compositesb.2018.07.009

Aw, Y.Y., Yeoh, C.K., Idris, M.A., Teh, P.L., Hamzah, K.A., and Sazali, S.A. (2018). Effect of Printing Parameters on Tensile, Dynamic Mechanical, and Thermoelectric Properties of FDM 3D Printed CABS/ZnO Composites. Materials, 11.

Zhu, 2018, Compatibilizer Assistant SCF/ABS Composites with Improved Mechanical Properties Prepared by Fused Deposition Modeling, Polym.-Plast. Technol. Eng., 57, 1576, 10.1080/03602559.2017.1410843

Papon, 2018, Tensile properties, void contents, dispersion and fracture behaviour of 3D printed carbon nanofiber reinforced composites, J. Reinf. Plast. Compos., 37, 381, 10.1177/0731684417750477

Bi, 2018, Fabrication of flexible wood flour/thermoplastic polyurethane elastomer composites using fused deposition molding, Ind. Crops Prod., 122, 76, 10.1016/j.indcrop.2018.05.059

Castro, 2016, 3D printing of wood fibre biocomposites: From mechanical to actuation functionality, Mater. Des., 96, 106, 10.1016/j.matdes.2016.02.018

Osman, 2018, Investigation of ABS-rice straw composite feedstock filament for FDM, Rapid Prototyp. J., 24, 1067, 10.1108/RPJ-11-2017-0242

Mangat, 2018, Experimental investigations on natural fiber embedded additive manufacturing-based biodegradable structures for biomedical applications, Rapid Prototyp. J., 24, 1221, 10.1108/RPJ-08-2017-0162

Milosevic, M., Stoof, D., and Pickering, K. (2017). Characterizing the mechanical properties of fused deposition modelling natural fiber recycled polypropylene composites. J. Compos. Sci., 1.

Liu, 2019, Three-dimensional printing of poly(lactic acid) bio-based composites with sugarcane bagasse fiber: Effect of printing orientation on tensile performance, Polym. Adv. Technol., 30, 910, 10.1002/pat.4524

Banerjee, S.S., Burbine, S., Kodihalli Shivaprakash, N., and Mead, J. (2019). 3D-Printable PP/SEBS Thermoplastic Elastomeric Blends: Preparation and Properties. Polymers, 11.

Rasselet, D., Caro-Bretelle, A.-S., Taguet, A., and Lopez-Cuesta, J.-M. (2019). Reactive Compatibilization of PLA/PA11 Blends and Their Application in Additive Manufacturing. Materials, 12.

Kuo, 2016, Preparation of starch/acrylonitrile-butadiene-styrene copolymers (ABS) biomass alloys and their feasible evaluation for 3D printing applications, Compos. Part B Eng., 86, 36, 10.1016/j.compositesb.2015.10.005

Wu, 2016, Modulation, functionality, and cytocompatibility of three-dimensional printing materials made from chitosan-based polysaccharide composites, Mater. Sci. Eng. C-Mater., 69, 27, 10.1016/j.msec.2016.06.062

Guo, 2018, Preparation and Characterization of Poly (butylene succinate)/Polylactide Blends for Fused Deposition Modeling 3D Printing, ACS Omega, 3, 14309, 10.1021/acsomega.8b02549

Zhong, 2001, Short fiber reinforced composites for fused deposition modeling, Mater. Sci. Eng. A, 301, 125, 10.1016/S0921-5093(00)01810-4

Gray, 1998, Thermoplastic composites reinforced with long fiber thermotropic liquid crystalline polymers for fused deposition modeling, Polym. Compos., 19, 383, 10.1002/pc.10112

Foyos, 2000, Effect of layer orientation on mechanical properties of rapid prototyped samples, Mater. Manuf. Process., 15, 107, 10.1080/10426910008912976

Shofner, 2003, Nanofiber-reinforced polymers prepared by fused deposition modeling, J. Appl. Polym. Sci., 89, 3081, 10.1002/app.12496

Brooks, 2017, Robot-assisted 3D printing of biopolymer thin shells, Int. J. Adv. Manuf. Technol., 89, 957, 10.1007/s00170-016-9134-y

Fu, 2000, Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites, Compos. Part A Appl. Sci. Manuf., 31, 1117, 10.1016/S1359-835X(00)00068-3

Fu, 1996, Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers, Compos. Sci. Technol., 56, 1179, 10.1016/S0266-3538(96)00072-3

Hine, 1995, Measuring the fibre orientation and modelling the elastic properties of injection-moulded long-glass-fibre-reinforced nylon, Compos. Sci. Technol., 53, 125, 10.1016/0266-3538(95)00011-9

Biolzi, 1994, On the mechanical response of short fibre reinforced polymer composites, J. Mater. Sci., 29, 2507, 10.1007/BF00363447

Fu, 1997, Analysis of mechanical properties of injection molded short glass fibre (SGF)/calcite/ABS composites, J. Mater. Sci. Technol., 13, 389

Ho, 1996, Tensile properties of short glass fibre reinforced polycarbonate, Polym. Polym. Compos., 4, 563

Ramsteiner, 1985, The influence of fibre diameter on the tensile behaviour of short-glass-fibre reinforced polymers, Compos. Sci. Technol., 24, 231, 10.1016/0266-3538(85)90075-2

Sato, 1991, Microfailure behaviour of randomly dispersed short fibre reinforced thermoplastic composites obtained by direct SEM observation, J. Mater. Sci., 26, 3891, 10.1007/BF01184987

Tekinalp, 2014, Highly oriented carbon fiber–polymer composites via additive manufacturing, Compos. Sci. Technol., 105, 144, 10.1016/j.compscitech.2014.10.009

Hassen, A.A., Lindahl, J., Chen, X., Post, B., Love, L., and Kunc, V. (2016, January 23–26). Additive manufacturing of composite tooling using high temperature thermoplastic materials. Proceedings of the SAMPE Conference Proceedings, Long Beach, CA, USA.

Singh, 2019, Sustainability of Recycled ABS and PA6 by Banana Fiber Reinforcement: Thermal, Mechanical and Morphological Properties, J. Inst. Eng. (India) Ser. C, 100, 351, 10.1007/s40032-017-0435-1

Kabir, 2012, Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview, Compos. Part B Eng., 43, 2883, 10.1016/j.compositesb.2012.04.053

Azwa, 2013, A review on the degradability of polymeric composites based on natural fibres, Mater. Des., 47, 424, 10.1016/j.matdes.2012.11.025

Rüggeberg, M., and Burgert, I. (2015). Bio-inspired wooden actuators for large scale applications. PLoS ONE, 10.

Holstov, 2015, Hygromorphic materials for sustainable responsive architecture, Constr. Build. Mater., 98, 570, 10.1016/j.conbuildmat.2015.08.136

Reichert, 2015, Meteorosensitive architecture: Biomimetic building skins based on materially embedded and hygroscopically enabled responsiveness, Comput.-Aided Des., 60, 50, 10.1016/j.cad.2014.02.010

Tibbits, S. (2013, July 25). The Emergence of “4D Printing”. Available online: http://www.ted.com/talks/skylar_tibbits_the_ emergence_of_4d_printing?language=en.

Raviv, D., and Roskovich, G. (2014, January 21–24). An alternative method to teaching design of control systems. Proceedings of the 12th LACCEI Annual Latin American and Caribbean Conference for Engineering and Technology (LACCEI), Guayaquil, Ecuador.

Qi, 2014, Active origami by 4D printing, Smart Mater. Struct., 23, 094007, 10.1088/0964-1726/23/9/094007

Wu, 2018, Preparation of poly(vinyl alcohol)/poly(lactic acid)/hydroxyapatite bioactive nanocomposites for fused deposition modeling, Polym. Compos., 39, E508, 10.1002/pc.24642

Haryńska, A., Kucinska-Lipka, J., Sulowska, A., Gubanska, I., Kostrzewa, M., and Janik, H. (2019). Medical-Grade PCL Based Polyurethane System for FDM 3D Printing—Characterization and Fabrication. Materials, 12.

Perez, 2014, Fracture surface analysis of 3D-printed tensile specimens of novel ABS-based materials, J. Fail. Anal. Prev., 14, 343, 10.1007/s11668-014-9803-9

Rodriguez, 2003, Design of Fused-Deposition ABS Components for Stiffness and Strength, J. Mech. Des., 125, 545, 10.1115/1.1582499

Ahn, 2002, Anisotropic material properties of fused deposition modeling ABS, Rapid Prototyp. J., 8, 248, 10.1108/13552540210441166

Bellini, 2003, Mechanical characterization of parts fabricated using fused deposition modeling, Rapid Prototyp. J., 9, 252, 10.1108/13552540310489631

Vega, 2011, The Effect of Layer Orientation on the Mechanical Properties and Microstructure of a Polymer, J. Mater. Eng. Perform., 20, 978, 10.1007/s11665-010-9740-z

Hague, 2004, Materials analysis of stereolithography resins for use in Rapid Manufacturing, J. Mater. Sci., 39, 2457, 10.1023/B:JMSC.0000020010.73768.4a

Bagsik, A., Schöppner, V., and Klemp, E. (2010, January 15–17). FDM part quality manufactured with Ultem* 9085. Proceedings of the 14th International Scientific Conference on Polymeric Materials, Halle, Germany.

Hague, 2004, Material and design considerations for rapid manufacturing, Int. J. Prod. Res., 42, 4691, 10.1080/00207840410001733940

Caulfield, 2007, Dependence of mechanical properties of polyamide components on build parameters in the SLS process, J. Mater. Process. Technol., 182, 477, 10.1016/j.jmatprotec.2006.09.007

Rocha, 2014, Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing, J. Mater. Res., 29, 1859, 10.1557/jmr.2014.158

Levenhagen, 2018, Interlayer diffusion of surface segregating additives to improve the isotropy of fused deposition modeling products, Polymer, 152, 35, 10.1016/j.polymer.2018.01.031

Levenhagen, 2017, Bimodal molecular weight samples improve the isotropy of 3D printed polymeric samples, Polymer, 122, 232, 10.1016/j.polymer.2017.06.057

Levenhagen, 2019, Improving Interlayer Adhesion in 3D Printing with Surface Segregating Additives: Improving the Isotropy of Acrylonitrile-Butadiene-Styrene Parts, ACS Appl. Polym. Mater., 1, 876, 10.1021/acsapm.9b00051