Dynamic analysis of planar multi-body systems with LuGre friction at differently located revolute clearance joints

Wanghui, B., Zhenyu, L., Jianrong, T., Shuming, G.: Detachment avoidance of joint elements of a robotic manipulator with clearances based on trajectory planning. Mech. Mach. Theory 45, 925–940 (2010)

Erkaya, S., Uzmay, I.: A neural-genetic (nn-ga) approach for optimising mechanisms having joints with clearance. Multibody Syst. Dyn. 20, 69–83 (2008)

Erkaya, S., Uzmay, I.: Determining link parameters using genetic algorithm in mechanisms with joint clearance. Mech. Mach. Theory 44, 222–234 (2009)

Erkaya, S., Uzmay, I.: Optimization of transmission angle for slider–crank mechanism with joint clearances. Struct. Multidiscip. Optim. 37, 493–508 (2009)

Xianzhen, H., Yimin, Z.: Robust tolerance design for function generation mechanisms with joint clearances. Mech. Mach. Theory 45, 1286–1297 (2010)

Dong, X., Ye, J.-s.J., Hu, X.-f.: Kinetic uncertainty analysis of the reheat-stop-valve mechanism with multiple factors. Mech. Mach. Theory 45, 1745–1765 (2010)

Ravn, P.: A continuous analysis method for planar multibody systems with joint clearance. Multibody Syst. Dyn. 2, 1–24 (1998)

Ravn, P., Shivaswamy, S., Alshaer, B.J., Lankarani, H.M.: Joint clearances with lubricated long bearings in multibody mechanical systems. J. Mech. Des. 122, 484–488 (2000)

Chunmei, J., Yang, Q., Ling, F., Ling, Z.: The nonlinear dynamic behavior of an elastic linkage mechanism with clearances. J. Sound Vib. 249(2), 213–226 (2002)

Chang, Z.: Nonlinear dynamics and analysis of four-bar linkage with clearance. In: Proceedings of 12th IFToMM Congress, France (2007)

Schwab, A.L., Meijaard, J.P., Meijers, P.: A comparison of revolute joint clearance models in the dynamic analysis of rigid and elastic mechanical systems. Mech. Mach. Theory 37, 895–913 (2002)

Flores, P., Ambrosio, J., Claro, J.P.: Dynamic analysis for planar multibody mechanical systems with lubricated joints. Multibody Syst. Dyn. 12, 47–74 (2004)

Flores, P., Ambrosio, J.: Revolute joints with clearance in multibody systems. Compos. Struct. 82, 1359–1369 (2004)

Erkaya, S., Uzmay, I.: Experimental investigation of joint clearance effects on the dynamics of a slider–crank mechanism. Multibody Syst. Dyn. 24, 81–102 (2010)

Shiau, T.N., Tsai, Y.J., Tsai, M.S.: Nonlinear dynamic analysis of a parallel mechanism with consideration of joint effects. Mech. Mach. Theory 43, 491–505 (2008)

Khemili, I., Romdhane, L.: Dynamic analysis of a flexible slider–crank mechanism with clearance. Eur. J. Mech. A, Solids 27, 882–898 (2008)

Erkaya, S., Uzmay, I.: Investigation on effect of joint clearance on dynamics of four-bar mechanism. Nonlinear Dyn. 58, 179–198 (2009)

Ravn, P., Shivaswamy, S., Lankarani, H.M.: Treatment of lubrication in long bearings for joint clearances in multibody mechanical systems. In: Proceedings of the ASME Design Technical Conference, Las Vegas (1999)

Olivier, A.B., Rodriguez, J.: Modeling of joints with clearance in flexible multibody systems. Int. J. Solids Struct. 39, 41–63 (2002)

Jia, X., Jin, D., Ji, L., Zhang, J.: Investigation on the dynamic performance of the tripod-ball sliding joint with clearance in a crank–slider mechanism. Part 1. Theoretical and experimental results. J. Sound Vib. 252(5), 919–933 (2002)

Bing, S., Ye, J.: Dynamic analysis of the reheat-stop-valve mechanism with revolute clearance joint in consideration of thermal effect. Mech. Mach. Theory 43(12), 1625–1638 (2008)

Flores, P.: Modeling and simulation of wear in revolute clearance joints in multibody systems. Mech. Mach. Theory 44(6), 1211–1222 (2009)

Dupac, M., Beale, D.G.: Dynamic analysis of a flexible linkage mechanism with cracks and clearance. Mech. Mach. Theory (2010). doi: 10.1016/j.mechmachtheory.2010.07.006

Flores, P., Ambrosio, J., Claro, J.C.P., Lankarani, H.M., Koshy, C.S.: Lubricated revolute joints in rigid multibody systems. Nonlinear Dyn. 56(3), 277–295 (2009)

Flores, P.: A parametric study on the dynamic response of planar multibody systems with multiple clearance joints. Nonlinear Dyn. 4, 633–653 (2010)

Dubowsky, S., Moening, M.F.: An experimental and analytical study of impact forces in elastic mechanical systems with clearances. Mech. Mach. Theory 13, 451–465 (1978)

Megahed, S.M., Haroun, A.F.: Analysis of the dynamic behavioral performance of mechanical systems with multi-clearance joints. J. Comput. Nonlinear Dyn. 7, 011002 (2011)

Mukras, S., Kim, N.H., Mauntler, N.A., Schmitz, T.L., Sawyer, W.G.: Analysis of planar multibody systems with revolute joint wear. Wear 268, 643–652 (2010)

Mukras, S., Mauntler, N., Kim, N., Schmitz, T., Sawyer, G.: Modeling a slider–crank mechanism with joint wear. Tech. rep. University of Florida (2008)

Tian, Q., Zhang, Y., Chen, L., Flores, P.: Dynamics of spatial flexible multibody systems with clearance and lubricated spherical joints. Compos. Struct. 87, 913–929 (2009)

Flores, P., Koshy, C., Lankarani, H., Ambrosio, J., Claro, J.: Numerical and experimental investigation on multibody systems with revolute clearance joints. Nonlinear Dyn. (2010)

Flores, P.: Dynamic analysis of mechanical systems with imperfect kinematic joints. Ph.D. thesis, Universidade do Minho Para (2004)

Pennestri, E., Valentini, P.P., Vita, L.: Multibody dynamics simulation of planar linkages with Dahl friction. Multibody Syst. Dyn. 17, 321–347 (2007)

Karnopp, D.: Computer simulation of slip-stick friction in mechanical dynamic systems. J. Dyn. Syst. Meas. Control 107(1), 100–103 (1985)

Kim, M.: Dynamic simulation for multi-body systems linking matlab. Master’s thesis, University of Waterloo, Ontario, Canada (2003)

Changkuan, Ju: Modeling friction phenomenon and elastomeric dampers in multi-body dynamics analysis. Ph.D. thesis, School of Aerospace Engineering, Georgia Institute of Technology (2009)

Lankarani, H.M., Nikravsh, P.E.: A contact force model with hysteresis damping for impact analysis of multibody systems. J. Mech. Des. 112, 369–376 (1990)

Iurian, C., Ikhouane, F., Rodellar, J., Grino, R.: Identification of a system with dry friction. Tech. rep., Universitat Politecnica De Catalunya (2005)

Johnson, C.T., Lorenz, R.D.: Experimental identification of friction and its compensation in precise position controlled mechanisms. In: Proceedings of IEEE Transactions on Industry Applications, vol. 28, pp. 1392–1398 (1992)

Coulomb, C.A.: Theories of simple machines. Memoires de Math. Phys. Acad. Sci., 10, 161–331 (1785)

Glocker, C.: Set-Valued Force Laws: Dynamics of Non Smooth Systems. Lectures Notes in Applied and Computational Mechanics. Springer, Berlin (2001)

Rabinowicz, E.: The nature of the static and kinetic coefficients of friction. J. Appl. Phys. 22(11), 1373–1379 (1951)

Olsson, H., Astrom, K.J., Canudas de Wit, C., Gäfvert, M., Lischinsky, P.: Friction models and friction compensation. Tech. rep., Department of Automatic Control, Lund Institute of Technology, Lund University (1997)

Stribeck, R.: The key qualities of sliding and roller bearings. Z. Ver. Dtsch. Ing. 46(38,39), 1342–1348, 1432–1437 (1902)

Threlfall, D.C.: The inclusion of coulomb friction in mechanisms programs with particular reference to dram. Mech. Mach. Theory 13, 475–483 (1978)

Rooney, G.T., Deravi, P.: Coulomb friction in mechanism sliding joints. Mech. Mach. Theory 17, 207–211 (1982)

Haug, E.J., Wu, S.C., Yang, S.M.: Dynamics of mechanical systems with coulomb friction, stiction, impact and constraint addition-deletion theory. Mech. Mach. Theory 21(5) (1986)

Wu, S.C., Yang, S.M., Haug, E.J.: Dynamics of mechanical systems with coulomb friction, stiction, impact and constraint addition–deletion. II. Planar systems. Mech. Mach. Theory 21(5), 407–416 (1986)

Ambrosio, J.C.: Impact of rigid and flexible multibody systems: deformation description and contact models, vol. II, pp. 15–33 (2002)

Bauchau, O.A., Rodriguez, J.: Modeling of joints with clearance in flexible multibody systems. Int. J. Solids Struct. 39, 41–63 (2002)

Canudas de Wit, C., Olsson, H., Astrom, K.J., Lischinsky, P.: A new model for control of systems with friction. In: IEEE Transactions on Automatic Control, pp. 419–425 (1995)

Swevers, J., Al-Bender, F., Ganesman, C.G., Prajogo, T.: An integrated friction model structure with improved presliding behavior for accurate friction compensation. In: IEEE Transactions on Automatic Control, vol. 45, pp. 675–686 (2000)

Astrom, K.J., Canudas-de-Wit, C.: Revisiting the lugre model: stick–slip motion and rate dependence. In: Proceedings of IEEE Conference on Control Systems, vol. 28, pp. 101–141 (2008)

Canudas de Wit, C., Lischinsky, P.: Adaptive friction compensation with partially known dynamic friction model. Int. J. Adaptive Cont. and Signal Proc. 65–80 (1997)

Flores, P., Ambrosio, J.: On the contact detection for contact-impact analysis in multibody systems. Multibody Syst. Dyn. 24, 103–122 (2010)

Love, A.E.: A treatise on the Mathematical Theory of Elasticity, 4th edn. Dover, New York (1944)

Flores, P., Ambrosio, J., Claro, J.C.P., Lankarani, H.M., Koshy, C.S.: A study on dynamics of mechanical systems including joints with clearance and lubrication. Mech. Mach. Theory 41, 247–261 (2006)

Flores, P., Ambrosio, J., Claro, J.C.P., Lankarani, H.M.: Influence of the contat-impact force model on the dynamic response of multi-body system. Multibody Syst. Dyn. 220, 21–34 (2006)

Muvengei, O., Kihiu, J., Ikua, B.: Effects of input speed on the dynamic response of planar multi-body systems with differently located frictionless revolute clearance joints. Int. J. Mech. Mater. Eng. 4, 234–243 (2010)

Heinze, A.: Modelling, simulation and control of a hydraulic crane. Master’s thesis, School of Technology and Design, Munich University of Applied Sciences (2007)

Kermani, M.R., Patel, R.V., Moallem, M.: Friction identification in robotic manipulators: case studies. In: Proceedings of IEEE Conference on Control Applications, pp. 1170–1175 (2005)