Corrosion inhibition and adsorption behaviour of black pepper extract on pure aluminum in hydrochloric acid medium

Emerald - Tập 45 Số 2 - Trang 106-118 - 2016
Divya G. Ladha1, Nisha K. Shah1, Suresh Thakur1, Mohsin Y. Lone2, Prakash C. Jha2
1Department of Chemistry, School of Sciences, Gujarat University, Ahmedabad, India
2School of Chemical Sciences, Central University of Gujarat, Gandhinagar, India

Tóm tắt

Purpose– The purpose of this paper is to investigate the inhibitive properties of black pepper extract (BPE) for aluminium in 1M hydrochloric acid (HCl) medium.Design/methodology/approach– Gravimetric, electrochemical impedance spectroscopy, galvanostatic polarization, scanning electron microscopy with energy dispersive X-ray examinations (SEM-EDX) techniques were used to study the corrosion inhibitive study.Findings– The gravimetric measurement indicates that inhibition efficiency shows direct proportional relation with concentration of inhibitor. The impedance results illustrates that there was a presence of protective layer of inhibitor adsorbed on the metal/solution interface. Polarization outcome showed that BPE is mixed type inhibitor. The existence of adherent layer of inhibitor on the Al surface was confirmed by SEM-EDX. Quantum chemical calculations were performed using the density functional theory at B3LYP/6-31G(d) level of theory to evaluate the activity of inhibitor molecules present in extract towards the corrosion inhibition of Al.Research limitations/implications– Due to the presence of large number of compounds in the extract, it becomes difficult to understand the most active compound responsible for inhibition. However, from gas chromatography mass spectrometry and quantum data, the approximation has been made that the major compound piperine present in the extract can be most probable component responsible for the inhibition activity. Further calculation of binding energy between Al and inhibitor molecules can be performed using Material Studio software.Practical implications– The extract can be used in cleaning and etching solutions. It can be used to limit the loss of Al metal during etching process.Originality/value– BPE can be used as a potential source of eco-friendly corrosion inhibitor for Al in HCl medium.

Từ khóa


Tài liệu tham khảo

Abdulwahab, M. , Kasim, A. , Fayomi, O.S.I. , Asuke, F. and Popoola, P.I. (2012), “Inhibitive effect of Arachis hypogeae on the corrosion of mild steel in sulphuric acid solution”, Journal of Material and Environmental Science , Vol. 3 No. 6, pp. 1177-1182.

Abiola, O.K. , Oforka, N.C. , Ebenso, E.E. and Nwinuka, N.M. (2007), “Eco-friendly corrosion inhibitors: the inhibitive action of delonix regia extract for the corrosion of aluminium in acidic media”, Anti-Corrosion Methods and Materials , Vol. 54 No. 4, pp. 219-224.

Al-Sabagh, A.M. , Kandile, N.Gh. , Nasser, N.M. , El-Azabawy, O.E. and El-Tabey, A.E. (2014), “Investigations of electro and quantum chemical properties of some novel cationic surfactants based on 1, 3, 5-triethanolhexahydro-1, 3, 5 triazine as corrosion inhibitiors for carbon steel in hydrochloric acid”, Chemical Engineering and Communications , Vol. 3 No. 5. doi:10.1080/00986445.2014.926452.

Al-Turkustani, A.M. (2010), “Aloe plant extract as environmentally friendly inhibitor on the corrosion of aluminum in hydrochloric acid in absence and presence of iodide ions”, Modern Applied Science , Vol. 4 No. 5, pp. 105-124.

Benabdellah, M. , Yahyi, A. , Dafali, A. , Aouniti, A. , Hammouti, B. and Ettouhami, A. (2011), “Corrosion inhibition of steel in molar HCl, by triphenyltin2–thiophene carboxylate”, Arabian Journal of Chemistry , Vol. 4 No. 3, pp. 243-247.

Bessone, J.B. , Mayer, C. , Jutner, K. and Lorenz, W.J. (1983), “AC-impedance measurements on aluminum barrier type oxide films”, Electrochimica Acta , Vol. 28 No. 2, pp. 171-175.

Beulah, T.E. , Rania, J.R. and Jeyaraj, T. (2013), “Inhibition effect of 4-(2-hydroxyphenyl)-but-3-en-2-one on the corrosion of aluminium in NaOH solution”, Archives of Applied Science Research , Vol. 5 No. 1, pp. 270-279.

Burstein, G.T. and Cinderey, R.J. (1991), “The potential of freshly generated metal surfaces determined from the guillotined electrode – a new technique”, Corrosion Science , Vol. 32 No. 11, pp. 1195-1211.

Chidiebere, M.A. , Ogukwe, C.E. , Oguzie, K.L. , Eneh, C.N. and Oguzie, E.E. (2012), “Corrosion inhibition and adsorption behaviour of Punica granatum extract on mild steel in acidic environments: experimental, and theoretical studies”, Industrial and Engineering Chemical Research , Vol. 51 No. 2, pp. 668-677.

Ebenso, E.E. , Eddy, N.O. and Odiongenyi, A.O. (2008), “Corrosion inhibitive properties and adsorption behaviour of ethanol extract of Piper guinensis as a green corrosion inhibitor for mild steel in H2SO4 ”, African Journal of Pure and Applied Chemistry , Vol. 2 No. 11, pp. 107-115.

El-bribri, A. , Tabyaoui, M. , El-Attari, H. , Boumhara, K. , Siniti, M. and Tabyaoui, B. (2011), “Temperature effects on the corrosion inhibition of carbon steel in HCl (1M) solution by methanolic extract of Euphorbia Falcata L”, Journal of Material and Environmental Science , Vol. 2 No. 2, pp. 156-165.

Fouda, A.S. , Hussein, E.M. and Mostafa, H.A. (1989), “Adsorption of some aliphatic carbonyl compounds on aluminium from acidic chloride solution”, Asian Journal of Chemistry , Vol. 1 No. 1, pp. 36-41.

Frers, S.E. , Stefenel, M.M. , Mayer, C. and Chierchie, T. (1990), “AC-impedance measurements on Al in chloride containing solutions and below the pitting potential”, Journal of Applied Electrochemistry , Vol. 20 No. 6, pp. 996-999.

Frisch, M.J. , Trucks, G.W. , Schlegel, H.B. , Scuseria, G.E. , Robb, M.A. , Cheeseman, J.R. , Scalmani, G. , Barone, V. , Mennucci, B. , Petersson, G.A. , Nakatsuji, H. , Caricato, M. , Li, X. , Hratchian, H.P. , Izmaylov, A.F. , Bloino, J. , Zheng, G. , Sonnenberg, J.L. , Hada, M. , Ehara, M. , Toyota, K. , Fukuda, R. , Hasegawa, J. , Ishida, M. , Nakajima, T. , Honda, Y. , Kitao, O. , Nakai, H. , Vreven, T. , Montgomery, J.A.Jr , Peralta, J.E. , Ogliaro, F. , Bearpark, M. , Heyd, J.J. , Brothers, E. , Kudin, K.N. , Staroverov, V.N. , Kobayashi, R. , Normand, J. , Raghavachari, K. , Rendell, A. , Burant, J.C. , Iyengar, S.S. , Tomasi, J. , Cossi, M. , Rega, N. , Millam, J.M. , Klene, M. , Knox, J.E. , Cross, J.B. , Bakken, V. , Adamo, C. , Jaramillo, J. , Gomperts, R. , Stratmann, R. E. , Yazyev, O. , Austin, A.J. , Cammi, R. , Pomelli, C. , Ochterski, J.W. , Martin, R.L. , Morokuma, K. , Zakrzewski, V.G. , Voth, G.A. , Salvador, P. , Dannenberg, J.J. , Dapprich, S. , Daniels, A.D. , Farkas, Ö. , Foresman, J.B. , Ortiz, J.V. , Cioslowski, J. and Fox, D.J. (2009), “Gaussian 09”, Revision D.01, Inc., Wallingford, CT.

García-Ochoa, E. , Jayanthi, N. , Hernandez, J.G. , López-Montero, M. , Cruz, J. and Pandiyan, T. (2013), “DFT and electrochemical studies: N,N′,N”,N‴-tetrakis(2-methylpyridyl)-1,4,8,11-tetraazacyclotetradecane (TMPC) as an efficient corrosion inhibitor for carbon steel surfaces in an acid medium”, International Journal of Electrochemical Science , Vol. 8 No. 1, pp. 8030-8049.

Gualdrón, A.F. , Becerra, E.N. , Peña, D.Y. , Gutiérrez, J.C. and Becerra, H.Q. (2013), “Inhibitory effect of Eucalyptus and Lippia Alba essential oils on the corrosion of mild steel in hydrochloric acid”, Journal of Material and Environmental Science , Vol. 4 No. 1, pp. 143-158.

Ji, G. , Shukla, S.K. , Dwivedi, P. , Sundaram, S. and Prakash, R. (2011), “Inhibitive effect of argemone mexicana plant extract on acid corrosion of mild steel”, Industrial and Engineering Chemical Research , Vol. 50 No. 21, pp. 11954-11959.

John, S. and Joseph, A. (2013), “Quantum chemical and electrochemical studies on the corrosion inhibition of aluminium in 1 N HNO3 using 1,2,4-triazine”, Material and Corrosion , Vol. 64 No. 7, pp. 625-632.

Kairi, N.I. and Kassim, J. (2013), “The effect of temperature on the corrosion inhibition of mild steel in 1 M HCl solution by Curcuma Longa extract”, International Journal of Electrochemical Science , Vol. 8 No. 1, pp. 7138-7155.

Khaled, K.F. (2010), “Electrochemical investigation and modeling of corrosion inhibition of aluminum in molar nitric acid using some sulphur-containing amines”, Corrosion Science , Vol. 52 No. 9, pp. 2905-2916.

Lukovits, I. , Kalman, E. and Zucchi, F. (2001), “Corrosion inhibitors-correlation between electronic structure and efficiency”, Corrosion , Vol. 57 No. 1, pp. 3-8.

Metikoš-Hukovic, M. , Babic′, R. and Grubac & caron, Z. (1998), “Corrosion protection of Al in acidic chloride solutions with nontoxic inhibitors”, Journal of Applied Electrochemistry , Vol. 28 No. 4, pp. 433-439.

Mohammed, R.A. , Abdulwahab, M. , Madugu, I.A. , Gaminana, J.O. and Asuke, F. (2013), “Inhibitive effect by natural Cyperus esculentus L. oil on the corrosion of A356.0-type Al-Si-Mg alloy in simulated seawater environment”, Journal of Material and Environmental Science , Vol. 4 No. 1, pp. 93-98.

Nahlé, A. , Al-Khayat, M. , Abu-Abdoun, I. and Abdel-Rahman, I. (2013), “Corrosion inhibition of mild steel by P,P’-Bis (triphenylphosphonio) methyl benzophenone dibromide in HCl solution”, Anti-Corrosion Methods and Material , Vol. 60 No. 1, pp. 20-27.

Nair, R.N. , Sharma, S. , Sharma, I.K. , Verma, P.S. and Sharma, A. (2010), “Inhibitory efficacy of piper nigrum linn. extract”, Rasayan Journal of Chemistry , Vol. 3 No. 4, pp. 783-795.

Nasibi, M. , Rafiee, E. , Rashed, G. , Ashassi-Sorkhabi, H. and Behpour, M. (2013), “Corrosion inhibition of mild steel by safflower (Carthamus tinctorius) extract: Polarization, EIS, AFM, SEM, EDS, and artificial neutral network modelling”, Journal of Dispersion Science and Technology , Vol. 34 No. 7, pp. 964-973.

Oguzie, E.E. (2007), “Corrosion inhibition of aluminium in acidic and alkaline media by sansevieria trifasciata extract”, Corrosion Science , Vol. 49 No. 3, pp. 1527-1539.

Oguzie, E.E. , Chidiebere, M.A. , Oguzie, K.L. , Adindu, C.B. and Momoh-Yahaya, H. (2014), “Biomass extracts for material protection: corrosion inhibition of mild steel in acidic media by Termenalia chebula extracts”, Chemical Engineering and Communication , Vol. 201 No. 6, pp. 790-803.

Oguzie, E.E. , Onuoha, G.N. and Ejike, E.N. (2007), “Effect of gongronema latifolium extract on aluminium corrosion in acidic and alkaline media”, Pigments and Resin Technology , Vol. 36 No. 1, pp. 44-49.

Parthasarathy, V.A. , Chempakam, B. and Zachariah, T.J. (2004), Chemistry of Spices , Biddles, Kings Lynn.

Pushpanjali, M. , Rao, S.A. and Rao, P. (2014), “Inhibitive effect of Carica papaya seed extract on aluminium in H2SO4 medium”, Journal of Material and Environmental Science , Vol. 5 No. 2, pp. 591-598.

Quraishi, M.A. , Yadav, D.K. and Ahamad, I. (2009), “Green approach to corrosion inhibition by black pepper extract in hydrochloric acid solution”, The Open Corrosion Journal , Vol. 2 No. 1, pp. 56-60. doi: 10.2174/1876503300902009056.

Raja, P.B. , Fadaeinasab, M. , Qureshi, A.K. and Rahim, A.A. (2013), “Evaluation of green corrosion inhibition by alkaloid extracts of ochrosia oppositifolia and isoreserpiline against mild steel in 1 M HCl medium”, Industrial and Engineering Chemical Research , Vol. 52 No. 31, pp. 10582-10593.

Raja, P.B. and Sethuraman, M.G.K. (2008), “Inhibitive effect of black pepper extract on the sulphuric acid corrosion of mild steel”, Material Letters , Vol. 62 No. 17, pp. 2977-2979.

Shubha, H.N. , Venkatesha, T.V. , Vathsala, K. , Pavitra, M.K. and Punith, M.K. (2013), “Preparation of self-assembled sodium oleate monolayer on mild steel and its corrosion inhibition behavior in saline water”, Applied Material Interfaces , Vol. 5 No. 21, pp. 10738-10744.

Singh, M.R. (2013), “A green Approach: a corrosion inhibition of mild steel by adhatoda vasica plant extract in 0.5 M H2SO4 ”, Journal of Material and Environmental Science , Vol. 4 No. 1, pp. 119-126.

Sivaraju, M. and Kannan, K. (2010), “Inhibitive properties of plant extract (Acalypha indicaL.) on mild steel corrosion in 1N phosphoric acid”, International Journal of ChemTech Research , Vol. 2 No. 2, pp. 1243-1253.

Soltani, N. , Tavakkoli, N. , Khayatkashani, M. , Jalali, M.R. and Mosavizade, A. (2012), “Green approach to corrosion inhibition of 304 stainless steel in hydrochloric acid solution by the extract of salvia officinalis leaves”, Corrosion Science , Vol. 62 No. 2, pp. 122-135.

Soror, T.Y. (2013), “Saffron extracts as environmentally safe corrosion inhibitors for aluminium dissolution in 2M HCl solution”, European Chemical Bulletin , Vol. 2 No. 4, pp. 191-196.

Umoren, S.A. , Gasem, Z.M. and Obot, I.B. (2013), “Natural products for material protection: inhibition of mild steel corrosion by date palm seed extracts in acidic media”, Industrial and Engineering Chemical Research , Vol. 52 No. 42, pp. 14855-14865.

Umoren, S.A. , Inam, E.I. , Udoidiong, A.A. , Obot, I.B. , Eduok, U.M. and Kim, K.W. (2015), “Humic scid from livestock dung: Ecofriendly corrosion inhibitor for 3SR aluminium alloy in alkaline medium”, Chemical and Engineering Communication , Vol. 202 No. 2, pp. 206-216.

Vimala, J.R. , Rose, A.L. and Raja, S. (2011), “Cassia auriculata extract as corrosion inhibitor for mild steel in acid medium”, International Journal of ChemTech Research , Vol. 3 No. 4, pp. 1791-1801.

Yadav, D.K. and Quraishi, M.A. (2012), “Application of some condensed uracils as corrosion inhibitors for mild steel: Gravimetric, electrochemical, surface morphological, uv-visible, and theoretical investigations”, Industrial and Engineering Chemical Research , Vol. 51 No. 46, pp. 14966-14979.

Yaro, A.S. , Khadom, A.A. and Wael, R.K. (2013), “Apricot juice as green corrosion inhibitor of mild steel in phosphoric acid”, Alexandria Engineering Journal , Vol. 52 No. 1, pp. 129-135.

Zapata-Loria, A.D. and Pech-Canul, M.A. (2014), “Corrosion inhibition of aluminium in 1N HCl solution by glutamic acid”, Chemical Engineering and Communication , Vol. 201 No. 7, pp. 855-869.

Sudheer and Quraishi, M.A. (2014), “2-Amino-3,5-dicarbonitrile-6-thio-pyridines: new and effective corrosion inhibitors for mild steel in 1 M HCl”, Industrial and Engineering Chemical Research , Vol. 53 No. 8, pp. 2851-2859.

Thông tin
Thông tin xuất bản

Emerald

Tập 45 Số 2

106-118

Thông tin tác giả